Widest Variety of D-subminiature Solutions
D-subminiature Accessories
- Multitudes of unique D-subminiature connector accessories
- Accessories to support D-subminiature use in a variety of applications
- Accessories to support ease of placement into manufacturing
Lightweight Aluminum Hood
- Lightweight
- EMI shielding
- Multiple internal grounding ports
- Wide cable entry aperture
- Low residual magnetism
Standard Density D-subminiature
MD, MDX, ED, SD, HDC, RD, ORD, AD, HAD
- High reliability
- Six package sizes
- 9-50 size 20 contacts
- Current ratings to 14 amperes per contact
- Multiple performance options for best cost/performance ratio
- Board to board, cable to cable or board, panel to cable or board
High Density D-subminiature
ODD, DD, DAD
- High reliability
- Six package sizes
- 15-104 size 22 contacts
- Current ratings to 10 amperes per contact
- Multiple performance options for best cost/performance ratio
- Board to board, cable to cable or board, panel to cable or board
Standard Density Combo-D
CBD, CBM, CBC, CBDP, QB, ACBDP, ACBMP
- High reliability
- Six package sizes; 22 contact variants
- 22 contact variants
- Current ratings to 100 amperes per contact
- Power, signal, coax, high voltage, air and Thermocouple contact options
- Board to board, cable to cable or board, panel to cable or board
- Wide variety of accessories/options including blind mate and sequential mating
High Density Combo-D
CBDD, CBHD, CBCD
- High reliability. High density
- Multiple package sizes and contact variants
- Size 22 contacts mixed with size 8 power contacts rated to 80 amperes each
- Power, signal, coax, high voltage, air and Thermocouple contact options
- Board to board, cable to cable or board, panel to cable or board
- Wide variety of accessories/options including blind mate and sequential mating
Dual Port
DP, MDP, DD*, XD*, CBDP
- High reliability
- Maximizes real estate around PCB perimeter
- 9-62 contacts in upper or lower position
- Standard and high density, Combo-D, and mixed density options
High Performance D-subminiature
SND, SDD, SCBM, SCBC, SAD, SADD, SACBM
For Use in Space Flight
- Suitable for use in applications requiring non-outgassing and low magnetic properties, such as space flight and instrumentation
- Standard and high density options. 9-104 contacts
- Combo-D options
- Connector saver options
- Goddard space flight and MIL-DTL-24308 class M
Environmentally Sealed
WD, WDD, EVD, MD, ODD
- High reliability
- Sealed against water and dust ingress to IP67
- Standard and high density options. 9-104 contacts
- Sealed panel mount options with cable and PCB mount terminations
- Sealed cable options
Compliant Press-fit
PCD, PCDD
- High reliability
- Six shell sizes, 9-104 contacts
- Standard and high density
- Combo-D options with size 8 power contacts
Connector Savers
AD, HAD, DAD, ACBDP, ACBMP, SAD, SADD, SACBM
- Connector savers can be mated to a connector that would normally experience high numbers of mating cycles. These connectors can easily be replaced, "saving" a connector that cannot. Connector savers can also be used as "gender changers."
- Available in standard connector variants for Standard Density, High Density, Combo-D and High Performance series
- Variety of performance levels including space flight
Thermocouple
- D-subminiature and circular connectors with crimp wire and PCB mount thermocouple contact options
Hermetic
XAVAC, SAVAC, HIVAC, CIVAC
- Connector feedthroughs for the purpose of high vacuum applications. Leakage rate of 5 x 10-9 mbar.l/s @ vacuum of 1.5 x 10-5 atm
- Connectors exhibit dual mating faces as standard
- Offered in standard density, high density and mixed density D-subminiature and circular configurations
SAE J2496 Transit Area Network System
Transit vehicles of today need a number of electronic vehicle enhancements to effectively move forward within ITS America's (Intelligent Transportation Society) effort to better manage the limited resources of the roadways and streets. The Network Cabling Standard has been incorporated by many transit authorities through upgrades and new vehicle specifications and is currently in use. Positronic Industries is proud to be a part of this effort by providing junction boxes and cables that meet or exceed the guidelines specified by the SAE (Society of Automotive Engineers) J2496 Specification.
Feeds