Combo-D

Drawings/Models: CBD11W1

One size 8, ten size 20 contacts.

Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight solder
Press-fit PCB hole sizes
Removable contacts, male crimp
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder

Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.

For complete removable contact selection, see Catalog page in the section nav bar.

Cable/Panel Mount Connectors

• CBD11W1M2000S - Fixed solder cup termination male connector, stainless steel shells.
  • Drawing (117 KB)
   

PCB mount, right angle solder

• CBD11W1F5R800X/AA - right angle (90°) solder PCB mount female connector, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, tin plated shells, RoHS compliant.
  • Drawing (147 KB)
   
• CBD11W1F5R8N00 -
  • Drawing (134 KB)
   
• CBD11W1F85R7NT20 - right angle (90°) solder PCB mount female connector, with signal and shielded contacts FRT 4201D footprint, 7.19 [0.283] signal contact extension, bracket 90° metal threads with cross bar, push-on fastener, fixed female jackscrews.
  • Drawing (167 KB)
   
• CBD11W1F85R8N00 - right angle (90°) solder PCB mount female connector, with signal and shielded contacts FRT 4201D footprint, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
  • IGES (412 KB)
  • SolidWorks (1.9 MB)
  • STEP (244 KB)
   
• CBD11W1M57R600Z - Solder, right angle (90°) PCB mount with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 3.05 [0.120] Ø mounting hole with cross bar, tin and dimpled shells.
  • Drawing (157 KB)
   
• CBD11W1M5R800X/AA - Solder, right angle (90°) PCB mount male connector, bracket metal swaged to connector with 4-40 locknut with cross bar, tin plated shells, RoHS compliant.
  • Drawing (143 KB)
   
• CBD11W1M5R8N00 - Solder, right angle (90°) PCB mount male connector, bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
  • Drawing (132 KB)
   
• CBD11W1M850000 - Solder right angle (90°) PCB mount with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension.
  • Drawing (163 KB)
   
• CBD11W1M85R8N00 - Solder right angle (90°) PCB mount with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
  • IGES (341 KB)
  • SolidWorks (3.7 MB)
  • STEP (196 KB)
   

PCB mount, straight solder

• CBD11W1F30000 - Straight solder PCB mount female connector
  • Drawing (127 KB)
   
• CBD11W1F3000X/AA - Straight solder PCB mount female connector, tin plated shells, RoHS compliant.
  • Drawing (133 KB)
   
• CBD11W1F35S600X - Straight solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 4.32 [0.170] tail length.
  • Drawing (149 KB)
   
• CBD11W1F3S000 - Straight solder PCB mount female connector, spacer.
  • IGES (303 KB)
  • SolidWorks (652 KB)
  • STEP (189 KB)
   
• CBD11W1F3S00X/AA - Straight solder PCB mount female connector, spacer, tin plated shells, RoHS compliant.
  • Drawing (136 KB)
   
• CBD11W1F3S600X - Straight solder PCB mount female connector, spacer with push-on fastener, tin plated shells.
  • Drawing (130 KB)
   
• CBD11W1F65S00X - Straight PCB mount with signal and shielded contacts FDS 4201D footprint, 4.32 [0.170] signal contact tail length, spacer, tin plated shells.
  • Drawing (162 KB)
   
• CBD11W1M30000 - Straight solder PCB mount male connector
  • Drawing (126 KB)
   
• CBD11W1M36S600Z - Straight solder PCB mount male connector with signal and 2.39 [0.094] Ø power contacts, 4.32 [0.170] tail length, spacer and push-on fastener.
  • Drawing (138 KB)
   
• CBD11W1M65S00X - Solder, straight PCB mount with signal and shielded contacts MDS4201D footprint, 4.32 [0.170] signal contact tail length, spacer, tin plated shells.
  • Drawing (150 KB)
   
• CBD11W1M65S0T0 - Solder, straight PCB mount with signal and shielded contacts MDS4201D footprint, 4.32 [0.170] signal contact tail length, spacer, fixed female jackscrews.
  • Drawing (165 KB)
   
• CBD11W1M65S60T0 - Solder, straight PCB mount with signal and shielded contacts MDS4201D footprint, 4.32 [0.170] signal contact tail length, spacer with push-on fastener, fixed female jackscrews.
  • Drawing (171 KB)
   

Press-fit PCB hole sizes

• SK6370 - Press-fit contact PCB hole size supplement
  • Drawing (251 KB)
   

Removable contacts, male crimp

• MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
  • Drawing (108 KB)
   

Removeable contacts, female crimp

• FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
  • Drawing (87 KB)
  • IGES (88 KB)
  • SolidWorks (592 KB)
  • STEP (45 KB)
   
• FC4010D - Size 8 contact for use with 10 AWG wire.
  • IGES (78 KB)
  • SolidWorks (133 KB)
  • STEP (43 KB)
   
• FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
  • Drawing (82 KB)
   
• FC4012D - Size 8 contact for use with 12 AWG wire.
  • IGES (80 KB)
  • SolidWorks (176 KB)
  • STEP (43 KB)
   
• FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
  • Drawing (83 KB)
   
• FC4016D - Size 8 contact for use with 16 AWG wire.
  • IGES (71 KB)
  • SolidWorks (112 KB)
  • STEP (30 KB)
   
• FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
  • Drawing (87 KB)
   
• FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
  • Drawing (89 KB)
   
• FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
  • Drawing (89 KB)
   
• FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
  • Drawing (110 KB)
   
• FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
  • Drawing (131 KB)
   
• FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
  • IGES (85 KB)
  • SolidWorks (132 KB)
  • STEP (39 KB)
   

Removeable contacts, female solder

• FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
  • Drawing (80 KB)
  • IGES (62 KB)
  • SolidWorks (110 KB)
  • STEP (35 KB)
   
• FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
  • Drawing (83 KB)
   
• FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
  • Drawing (83 KB)
  • IGES (64 KB)
  • SolidWorks (147 KB)
  • STEP (36 KB)
   
• FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
  • Drawing (88 KB)
  • IGES (81 KB)
  • SolidWorks (174 KB)
  • STEP (35 KB)
   
• FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
  • Drawing (89 KB)
  • IGES (81 KB)
  • SolidWorks (184 KB)
  • STEP (35 KB)
   
• FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
  • Drawing (90 KB)
   
• FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
  • Drawing (88 KB)
   
• FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
  • Drawing (92 KB)
   

Removeable contacts, male crimp

• MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
  • Drawing (87 KB)
  • IGES (74 KB)
  • SolidWorks (171 KB)
  • STEP (45 KB)
   
• MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
  • Drawing (88 KB)
   
• MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
  • Drawing (88 KB)
   
• MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
  • Drawing (88 KB)
   
• MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
  • Drawing (90 KB)
   
• MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
  • Drawing (86 KB)
   
• MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
  • Drawing (91 KB)
   
• MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
  • Drawing (47 KB)
  • IGES (43 KB)
  • SolidWorks (109 KB)
  • STEP (23 KB)
   

Removeable contacts, male solder

• MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
  • Drawing (87 KB)
  • IGES (31 KB)
  • SolidWorks (98 KB)
  • STEP (21 KB)
   
• MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
  • Drawing (77 KB)
   
• MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
  • Drawing (77 KB)
  • IGES (34 KB)
  • SolidWorks (97 KB)
  • STEP (21 KB)
   
• MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
  • Drawing (75 KB)
  • IGES (69 KB)
  • SolidWorks (146 KB)
  • STEP (41 KB)
   
• MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
  • Drawing (91 KB)
  • IGES (69 KB)
  • SolidWorks (151 KB)
  • STEP (41 KB)
   
• MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
  • Drawing (70 KB)
   
• MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
  • Drawing (90 KB)
   
• MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
  • Drawing (87 KB)
   

• Create a Part Number
• Catalogs
• Drawings/3D Models
• Removable Contacts
• Technical Specifications
• Connector Dimensions

• DESC Cross Reference
• LSA System
• Demystifying Current Ratings
• Bi-Spring Power Press-fit Terminations
• For Higher Power Density, Use Solid Contact Connector Technology
• Patent Information
• Tooling Information