Eight size 8 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight press-fit
PCB mount, straight solder
Press-fit PCB hole sizes
Removable contacts, male crimp
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- CBD8W8F00000 - Cable connector for use with female removable contacts
- IGES (127 KB)
- SolidWorks (767 KB)
- STEP (82 KB)
- CBD8W8F00000-759.1 - Cable connector for use with female removable contacts, blind mate panel.
- IGES (175 KB)
- SolidWorks (320 KB)
- STEP (96 KB)
- CBD8W8F00000/AA - Cable connector for use with female removable contacts, RoHS compliant.
- Drawing (103 KB)
- CBD8W8F0000X-759.1 - Cable connector for use with female removable contacts, tin plated shells, blind mate panel.
- Drawing (144 KB)
- CBD8W8F000T20 - Cable connector for use with female removable contacts, supplied with fixed female jackscrews
- Drawing (109 KB)
- CBD8W8F00GES - Cable connector for use with female removable contacts, metal hood with rotating male jackscrews, stainless steel shells.
- Drawing (93 KB)
- CBD8W8F0S20T20/AA - Cable connector for use with female removable contacts, swaged spacer, fixed female jackscrews, RoHS compliant.
- Drawing (115 KB)
- CBD8W8F0S5000 - Cable connector for use with female removable contacts, swaged spacer with lock nut.
- Drawing (86 KB)
- CBD8W8F0S500T20 - Cable connector for use with female removable contacts, swaged spacer with lock nut, fixed female jackscrews.
- Drawing (104 KB)
- CBD8W8F0S500X - Cable connector for use with female removable contacts, swaged spacer with lock nut, tin plated shells.
- Drawing (86 KB)
- CBD8W8M00000 - Cable connector for use with male removable contacts
- IGES (119 KB)
- SolidWorks (233 KB)
- STEP (68 KB)
- CBD8W8M00000-759.0 - Cable connector for use with male removable contacts, blind mate pilot.
- IGES (211 KB)
- SolidWorks (400 KB)
- STEP (137 KB)
- CBD8W8M00000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (102 KB)
- CBD8W8M000E0 - Cable connector for use with male removable contacts, rotating male jackscrews.
- Drawing (105 KB)
- CBD8W8M000X/AA - Cable connector for use with male removable contacts, tin plated shells, RoHS compliant.
- Drawing (101 KB)
- CBD8W8M00JV30 - Cable connector for use with male removable contacts, top opening plastic hood, vibration locking tabs.
- Drawing (115 KB)
- CBD8W8M00LVL0 - Cable connector for use with male removable contacts, plastic side opening hood, vibration lock lever.
- Drawing (151 KB)
- CBD8W8M00Z00/AA - Cable connector for use with male removable contacts, plastic hood with rotating jackscrews, RoHS compliant.
- Drawing (115 KB)
- CBD8W8M0F000 - Cable connector for use with male removable contacts, universal float mounts.
- Drawing (104 KB)
- CBD8W8M0S500X/AA - Cable connector for use with male removable contacts, spacer with lock nut, tin plated shells, RoHS compliant.
- Drawing (105 KB)
PCB mount, right angle solder
- CBD8W8F85R7NT20/AA - right angle (90°) solder PCB mount female connector, with signal and shielded contacts FRT 4201D footprint, 7.19 [0.283] signal contact extension, bracket 90° metal threads with cross bar, push-on fastener, fixed female jackscrews, RoHS compliant.
- Drawing (180 KB)
- CBD8W8F85R7NTX - right angle (90°) solder PCB mount female connector, with signal and shielded contacts FRT 4201D footprint, 7.19 [0.283] signal contact extension, bracket 90° metal threads with cross bar, push-on fastener, fixed female jackscrews, tin plated shells.
- Drawing (167 KB)
PCB mount, straight press-fit
- CBD8W8F93S7000 - Straight compliant press-fit termination PCB mount female connector, swaged spacer with push-on fastener for use with ferrite inductor, 4-40 threads, 9.53 [0.375] length.
- Drawing (132 KB)
- CBD8W8M93S0T2S - Straight compliant press-fit termination PCB mount male connector, swaged spacer, fixed female jackscrews, stainless steel shells.
- Drawing (146 KB)
PCB mount, straight solder
- CBD8W8F37S0T0 - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, spacer, fixed female jackscrews.
- IGES (275 KB)
- CBD8W8F37S0V30 - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, spacer, vibration lock tabs.
- IGES (238 KB)
- CBD8W8M370000 - Straight solder PCB mount male connector with signal and 3.18 [0.125]
Ø power contacts, 4.32 [0.170] tail length.
- SolidWorks (399 KB)
- STEP (107 KB)
- CBD8W8M37P0TZ - Straight solder PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 4.32 [0.170] tail length, post, fixed female jackscrews, tin and dimpled shells.
- Drawing (126 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removable contacts, male crimp
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (108 KB)
Removeable contacts, female crimp
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (82 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (87 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- Drawing (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (131 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
Removeable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (80 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (92 KB)
Removeable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (88 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- Drawing (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (86 KB)
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- Drawing (91 KB)
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- Drawing (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
Removeable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (77 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- Drawing (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (87 KB)
