Seven size 8, seventeen size 20 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight solder
Press-fit PCB hole sizes
Removable contacts, male crimp
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- CBD24W7F200V30 - Fixed solder cup termination female connector, vibration lock tabs.
- Drawing (135 KB)
- CBD24W7M20000-759.1 -
- IGES (429 KB)
- SolidWorks (551 KB)
- STEP (251 KB)
- CBD24W7M200V30 - Fixed solder cup termination male connector, vibration locking tabs.
- Drawing (128 KB)
- CBD24W7M20Z400 - Fixed solder cup termination male connector, plastic hood with fixed female jackscrews.
- Drawing (127 KB)
PCB mount, right angle solder
- CBD24W7F55R8N0X - Right angle (90°) solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells.
- Drawing (226 KB)
- CBD24W7F57R8N0X/AA - Right angle (90°) solder PCB mount female connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells, RoHS compliant.
- Drawing (179 KB)
- CBD24W7F85R80V50 - right angle (90°) solder PCB mount female connector, with signal and shielded contacts FRT 4201D footprint, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, vibration lock tabs.
- Drawing (224 KB)
- IGES (833 KB)
- SolidWorks (9.1 MB)
- STEP (537 KB)
PCB mount, straight solder
- CBD24W7F37S000-759.0 - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, spacer, blind mate pilot.
- Drawing (159 KB)
- CBD24W7M370000-759.1 - Straight solder PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 4.32 [0.170] tail length, blind mate panel.
- Drawing (173 KB)
- CBD24W7M37S600Z - Straight solder PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 4.32 [0.170] tail length, spacer with push-on fastener, tin dimpled shells.
- Drawing (161 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removable contacts, male crimp
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (108 KB)
Removeable contacts, female crimp
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (82 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (87 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- Drawing (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (131 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
Removeable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (80 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (92 KB)
Removeable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (88 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- Drawing (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (86 KB)
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- Drawing (91 KB)
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- Drawing (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
Removeable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (77 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- Drawing (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (87 KB)
