Five size 8 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight solder
Press-fit PCB hole sizes
Removable contacts, male crimp
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- CBD5W5F00000 - Cable connector for use with female removable contacts
- Drawing (97 KB)
- CBD5W5F00000-759.1 - Cable connector for use with female removable contacts, blind mate panel.
- Drawing (111 KB)
- CBD5W5F0000X/AA - Cable connector for use with female removable contacts, tin plated shells, RoHS compliant.
- Drawing (108 KB)
- CBD5W5F000E0 - Cable connector for use with female removable contacts, rotating jackscrews.
- Drawing (125 KB)
- CBD5W5F000E2S - Cable connector for use with female removable contacts, rotating male jackscrews, stainless steel shells.
- Drawing (107 KB)
- IGES (251 KB)
- SolidWorks (5.3 MB)
- STEP (148 KB)
- CBD5W5F00GEX - Cable connector for use with female removable contacts, metal hood with rotating male jackscrews, tin plated shells.
- IGES (300 KB)
- SolidWorks (608 KB)
- STEP (121 KB)
- CBD5W5F00GVLX - Cable connector for use with female removable contacts, metal hood with rotating jackscrews, tin plated shells.
- Drawing (104 KB)
- IGES (339 KB)
- SolidWorks (1.9 MB)
- STEP (198 KB)
- CBD5W5F00JVL0 - Cable connector for use with female removable contacts, plastic top opening hood, vibration lock lever.
- Drawing (128 KB)
- CBD5W5F00LVL0 - Cable connector for use with female removable contacts, plastic side opening hood, vibration lock lever.
- Drawing (112 KB)
- CBD5W5F00Z0X - Cable connector for use with female removable contacts, plastic hood with rotating jackscrews, tin plated shells.
- Drawing (118 KB)
- CBD5W5F0S500X - Cable connector for use with female removable contacts, swaged spacer with lock nut, tin plated shells.
- Drawing (101 KB)
- CBD5W5M0000S - Cable connector for use with male removable contacts, stainless steel shells.
- Drawing (100 KB)
- CBD5W5M0000X/AA - Cable connector for use with male removable contacts, tin plated shells, RoHS compliant.
- Drawing (106 KB)
- CBD5W5M000V50 - Cable connector for use with male removable contacts, vibration lock tab rear panel mount.
- Drawing (121 KB)
- CBD5W5M00GE0 - Cable connector for use with male removable contacts, metal hood with rotating male jackscrews.
- Drawing (103 KB)
- CBD5W5M00Z0Z - Cable connector for use with male removable contacts, plastic hood with rotating jackscrews, tin and dimpled shells.
- Drawing (120 KB)
- CBD5W5M0S0T0 - Cable connector for use with male removable contacts, spacer, fixed female jackscrews.
- IGES (171 KB)
PCB mount, right angle solder
- CBD5W5F55R70T20 - Right angle (90°) solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 threads with cross bar, fixed female jackscrews.
- Drawing (120 KB)
- CBD5W5F57R800X - Right angle (90°) solder PCB mount female connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, tin plated shells.
- Drawing (124 KB)
- CBD5W5F57R8N0X - Right angle (90°) solder PCB mount female connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells.
- Drawing (132 KB)
- CBD5W5M55R8000 - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar.
- Drawing (137 KB)
- CBD5W5M55R800X - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar, tin plated shells.
- IGES (216 KB)
- SolidWorks (736 KB)
- STEP (129 KB)
- CBD5W5M55R8N0X - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells.
- IGES (302 KB)
- SolidWorks (1.7 MB)
- STEP (148 KB)
- CBD5W5M57R800X - Solder, right angle (90°) PCB mount with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 4-40 locknut with cross bar, tin plated shells.
- Drawing (125 KB)
- CBD5W5M57R8N0X - Solder, right angle (90°) PCB mount with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells.
- Drawing (134 KB)
- CBD5W5M85S00S - Solder right angle (90°) PCB mount with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, spacer, stainless steel shells.
- SolidWorks (6.6 MB)
- STEP (301 KB)
PCB mount, straight solder
- CBD5W5F37S0T0 - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, spacer, fixed female jackscrews.
- IGES (211 KB)
- CBD5W5F37S600X - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, spacer with push-on fastener, tin plated shells.
- Drawing (64 KB)
- CBD5W5F65S00X - Straight PCB mount with signal and shielded contacts FDS 4201D footprint, 4.32 [0.170] signal contact tail length, spacer, tin plated shells.
- Drawing (69 KB)
- CBD5W5M3700T20 - Straight solder PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 4.32 [0.170] tail length, fixed female jackscrews.
- IGES (309 KB)
- SolidWorks (641 KB)
- STEP (231 KB)
- CBD5W5M3700T2S - Straight solder PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 4.32 [0.170] tail length, fixed female jackscrews, stainless steel shells.
- Drawing (137 KB)
- CBD5W5M65S0TS - Solder, straight PCB mount with signal and shielded contacts MDS4201D footprint, 4.32 [0.170] signal contact tail length, spacer, fixed female jackscrews, stainless steel shells.
- Drawing (153 KB)
- IGES (426 KB)
- SolidWorks (4.1 MB)
- STEP (290 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removable contacts, male crimp
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (108 KB)
Removeable contacts, female crimp
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (82 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (87 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- Drawing (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (131 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
Removeable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (80 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (92 KB)
Removeable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (88 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- Drawing (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (86 KB)
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- Drawing (91 KB)
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- Drawing (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
Removeable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (77 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- Drawing (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (87 KB)
