One size 8, ten size 20 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight solder
Press-fit PCB hole sizes
Removable contacts, female
Removable contacts, female crimp
Removable contacts, female solder
Removable contacts, male
Removable contacts, male crimp
Removable contacts, male solder
Standard Accessories
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- CBD11W1F20000 - Fixed solder cup termination female connector
- 2D PDF (92 KB)
- CBD11W1M2000S - Fixed solder cup termination male connector, stainless steel passivated shells.
- 2D PDF (117 KB)
PCB mount, right angle solder
- CBD11W1F55R8N00 - Right angle (90°) solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- STEP (306 KB)
- CBD11W1F5R800X/AA - right angle (90°) solder PCB mount female connector, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, tin plated shells, RoHS compliant.
- 2D PDF (147 KB)
- CBD11W1F5R8N00 - right angle (90°) solder PCB mount female connector, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- 2D PDF (134 KB)
- CBD11W1F85R7NT20 - right angle (90°) solder PCB mount female connector, with signal and shielded contacts FRT 4201D footprint, 7.19 [0.283] signal contact extension, bracket 90° metal threads with cross bar, push-on fastener, fixed female jackscrews.
- 2D PDF (167 KB)
- CBD11W1F85R8N00 - right angle (90°) solder PCB mount female connector, with signal and shielded contacts FRT 4201D footprint, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- IGES (412 KB)
- SolidWorks (1.9 MB)
- STEP (244 KB)
- CBD11W1M55R8N00 - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- CBD11W1M57R600Z - Solder, right angle (90°) PCB mount with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 3.05 [0.120] Ø
mounting hole with cross bar, tin and dimpled shells.
- 2D PDF (115 KB)
- CBD11W1M5R800X/AA - Solder, right angle (90°) PCB mount male connector, bracket metal swaged to connector with 4-40 locknut with cross bar, tin plated shells, RoHS compliant.
- 2D PDF (143 KB)
- CBD11W1M5R8N00 - Solder, right angle (90°) PCB mount male connector, bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- 2D PDF (132 KB)
- CBD11W1M850000 - Solder right angle (90°) PCB mount with signal and shielded
contacts MRT4201D footprint, 7.19 [0.283] signal contact extension.
- 2D PDF (163 KB)
- CBD11W1M85R8N00 - Solder right angle (90°) PCB mount with signal and shielded
contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- IGES (341 KB)
- SolidWorks (3.7 MB)
- STEP (196 KB)
PCB mount, straight solder
- CBD11W1F30000 - Straight solder PCB mount female connector
- 2D PDF (127 KB)
- CBD11W1F3000X/AA - Straight solder PCB mount female connector, tin plated shells, RoHS compliant.
- 2D PDF (133 KB)
- CBD11W1F35S6000 - Straight solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 4.32 [0.170] tail length.
- CBD11W1F35S600X - Straight solder PCB mount female connector with signal and 1.98 [0.078]
Ø power contacts, 4.32 [0.170] tail length, tin plated shells.
- 2D PDF (106 KB)
- CBD11W1F3S000 - Straight solder PCB mount female connector, spacer.
- IGES (303 KB)
- SolidWorks (652 KB)
- STEP (189 KB)
- CBD11W1F3S00X/AA - Straight solder PCB mount female connector, spacer, tin plated shells, RoHS compliant.
- 2D PDF (136 KB)
- CBD11W1F3S600X - Straight solder PCB mount female connector, spacer with push-on fastener, tin plated shells.
- 2D PDF (130 KB)
- CBD11W1F65S00X - Straight PCB mount with signal and shielded contacts FDS 4201D footprint, 4.32 [0.170] signal contact tail length, spacer, tin plated shells.
- 2D PDF (162 KB)
- CBD11W1M30000 - Straight solder PCB mount male connector
- 2D PDF (126 KB)
- CBD11W1M35S6000 - Straight solder PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 4.32 [0.170] tail length, spacer with push-on fastener.
- CBD11W1M36S600Z - Straight solder PCB mount male connector with signal and 2.39 [0.094]
Ø power contacts, 4.32 [0.170] tail length, spacer and push-on fastener.
- 2D PDF (107 KB)
- CBD11W1M65S00X - Solder, straight PCB mount with signal and shielded
contacts MDS4201D footprint, 4.32 [0.170] signal contact
tail length, spacer, tin plated shells.
- 2D PDF (150 KB)
- CBD11W1M65S0T0 - Solder, straight PCB mount with signal and shielded contacts MDS4201D footprint, 4.32 [0.170] signal contact tail length, spacer, fixed female jackscrews.
- 2D PDF (165 KB)
- CBD11W1M65S60T0 - Solder, straight PCB mount with signal and shielded contacts MDS4201D footprint, 4.32 [0.170] signal contact tail length, spacer with push-on fastener, fixed female jackscrews.
- 2D PDF (171 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- 2D PDF (251 KB)
Removable contacts, female
- FBB4000D - Size 0, for use with bus bar, female contact.
- FBB4000DS/AA - Size 0 contact for use with 0 AWG wire.
- FBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
- 2D PDF (84 KB)
Removable contacts, female crimp
- FC4006D/AA - High conductivity material, size 8 contact for use with 6 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4008DS/AA - High conductivity material, Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (79 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (78 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (81 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- 2D PDF (131 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
- FCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Removable contacts, male
- MBB4000D - Size 0, for use with bus bar, female contact.
- MBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
Removable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (83 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- 2D PDF (91 KB)
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- 2D PDF (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
- MCC4103D - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- MCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- 2D PDF (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Standard Accessories
- D00000E0 - Rotating male jackscrews.
- D00000E20 - Rotating male screw locks.
- D00000E60 - Rotating male and female polarized jackscrews.
- 2D PDF (97 KB)
- D00000G0-759.0 - Blind mate guides.
- D00000T0 - Fixed female jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T20 - Fixed female jackscrews with washers.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T60 - Fixed male and female polarized jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- 2D PDF (84 KB)
- D000P000 - Threaded post.
- 2D PDF (63 KB)
- D15000ACE0 - Lightweight aluminum hood, no finish, rotating male jackscrews.
- D15000ANE0 - Lightweight aluminum hood, nickel plate, rotating male jackscrews.
- D15000ANT20 - Lightweight aluminum hood, nickel plate, fixed female jackscrews.
- D15000ANVL0 - Lightweight aluminum hood, nickel plate, vibration lock lever.
- D15000G00 - Hood, EMI/RFI metal.
- 2D PDF (89 KB)
- D15000GA0 - EMI/RFI adapter.
- D15000GE0 - Hood, EMI/RFI metal, rotating male jackscrews.
- D15000GVL0 - Hood, EMI/RFI metal, vibration slide lock.
- D15000GVL0-1023.0 - Hood, EMI/RFI metal, extended height, vibration slide lock.
- D15000J00 - Hood, top opening, plastic.
- 2D PDF (94 KB)
- D15000JV30 - Hood, top opening, plastic, lock tab, connector front panel mounted.
- D15000JVL0 - Hood, top opening, plastic, vibration lock lever.
- 2D PDF (106 KB)
- D15000WE20 - Hood, top or side opening, plastic, rotating male screwlocks.
- 2D PDF (112 KB)
- D15000Z00 - Hood, top or side opening, robust and extended height, composite and plastic with rotating male jackscrews.
- D9/370000V30 - Lock tab, connector front panel mounted.
- D9/370000V50 - Lock tab, connector rear panel mounted.
Feeds