Four size 8, thirty-two size 20 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight solder
Press-fit PCB hole sizes
Removable contacts, female
Removable contacts, female crimp
Removable contacts, female solder
Removable contacts, male
Removable contacts, male crimp
Removable contacts, male solder
Standard Accessories
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- CBD36W4F20000 - Fixed solder cup termination female connector
- 2D PDF (137 KB)
- CBD36W4F200E0 - Fixed solder cup termination female connector, rotating male jackscrews.
- 2D PDF (126 KB)
- CBD36W4M20000 - Fixed solder cup termination male connector.
- 2D PDF (122 KB)
PCB mount, right angle solder
- CBD36W4F5R70T20 - right angle (90°) solder PCB mount female connector, bracket 90° metal swaged to connector with 4-40 threads with cross bar, RoHS compliant.
- CBD36W4F85R70V3X - Right angle (90°) solder PCB mount female connector, with signal and shielded contacts FRT 4201D footprint, 7.19 [0.283] signal contact extension, bracket 90° metal with 4-40 threads with cross bar, vibration locking tabs, tin plated shells.
- 2D PDF (223 KB)
- CBD36W4F85R70V5X - Right angle (90°) solder PCB mount female connector, with signal and shielded contacts FRT 4201D footprint, 7.19 [0.283] signal contact extension, bracket 90° metal with 4-40 threads with cross bar, vibration locking tabs rear panel mount, tin plated shells.
- IGES (981 KB)
- SolidWorks (1.7 MB)
- STEP (597 KB)
- CBD36W4M500T2S - Solder, right angle (90°) PCB mount male connector, fixed female jackscrews, stainless steel passivated shells.
- 2D PDF (164 KB)
- CBD36W4M55R8N00 - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- STEP (467 KB)
- CBD36W4M57R7NT2X - Solder, right angle (90°) PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 4-40 threads with cross bar, push-on fastener, fixed female jackscrews, tin plated shells.
- SolidWorks (2.6 MB)
- STEP (555 KB)
- CBD36W4M5B300S-759.0 - Solder, right angle (90°) PCB mount male connector, fixed female jackscrews, metal bracket with cross bar, stainless steel passivated shells, blind mate guides.
- 2D PDF (152 KB)
- CBD36W4M85R70V3Z - Right angle (90°) PCB mount male connector with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, bracket metal swaged to connector with 4-40 threads with cross bar, vibration locking tabs, tin and dimpled shells.
- 2D PDF (223 KB)
- CBD36W4M85R70V5Z - Right angle (90°) PCB mount male connector with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, bracket metal swaged to connector with 4-40 threads with cross bar, vibration locking tabs rear panel mount, tin and dimpled shells.
- IGES (807 KB)
- SolidWorks (1.2 MB)
- STEP (475 KB)
PCB mount, straight solder
- CBD36W4F35S6000 - Straight solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 4.32 [0.170] tail length.
- CBD36W4F65S60TX - Straight PCB mount with signal and shielded contacts FDS 4201D footprint, 4.32 [0.170] signal contact tail length, spacer with push-on fastener, fixed female jackscrews, tin plated shells.
- 2D PDF (198 KB)
- CBD36W4M35S6000 - Straight solder PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 4.32 [0.170] tail length, spacer with push-on fastener.
- CBD36W4M37000X - Straight solder PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 4.32 [0.170] tail length, tin plated shells.
- 2D PDF (113 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- 2D PDF (251 KB)
Removable contacts, female
- FBB4000D - Size 0, for use with bus bar, female contact.
- FBB4000DS/AA - Size 0 contact for use with 0 AWG wire.
- FBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
- 2D PDF (84 KB)
Removable contacts, female crimp
- FC4006D/AA - High conductivity material, size 8 contact for use with 6 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4008DS/AA - High conductivity material, Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (79 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (78 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (81 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- 2D PDF (131 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
- FCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Removable contacts, male
- MBB4000D - Size 0, for use with bus bar, female contact.
- MBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
Removable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (83 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- 2D PDF (91 KB)
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- 2D PDF (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
- MCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- 2D PDF (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Standard Accessories
- D00000E0 - Rotating male jackscrews.
- D00000E20 - Rotating male screw locks.
- D00000E60 - Rotating male and female polarized jackscrews.
- 2D PDF (97 KB)
- D00000G0-759.0 - Blind mate guides.
- D00000T0 - Fixed female jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T20 - Fixed female jackscrews with washers.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T60 - Fixed male and female polarized jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- 2D PDF (84 KB)
- D000P000 - Threaded post.
- 2D PDF (63 KB)
- D500000V30 - Lock tab, connector front panel mounted.
- 2D PDF (79 KB)
- D50000ACE0 - Lightweight aluminum hood, no finish, rotating male jackscrews.
- D50000ANE0 - Lightweight aluminum hood, nickel plate, rotating male jackscrews.
- D50000ANT20 - Lightweight aluminum hood, nickel plate, fixed female jackscrews.
- 2D PDF (89 KB)
- D50000ANVL0 - Lightweight aluminum hood, nickel plate, vibration lock lever.
- 2D PDF (126 KB)
- D50000GE0 - Hood, EMI/RFI metal, rotating male jackscrews.
- D50000GE0-1023.5 - Hood, EMI/RFI metal, extended height
- D50000GVL0 - Hood, EMI/RFI metal, vibration slide lock.
- D50000GVL0-1023.0 - Hood, EMI/RFI metal, extended height, vibration slide lock.
- D50000H00 - Hood, top opening, metal.
- D50000HT0 - Hood, metal with fixed female jackscrews.
- STEP (329 KB)
- D50000J00 - Hood, top opening, plastic.
- 2D PDF (62 KB)
- D50000JVL0 - Hood, top opening, plastic, vibration lock lever.
- D50000LVL0 - Hood, side opening, plastic, vibration slide lock.
- 2D PDF (115 KB)
- D50000Y00 - Hood, top opening, plastic, with rotating male jackscrews.
- 2D PDF (66 KB)
- D50000Y60 - Hood, top opening, plastic with rotating male and female
polarized jackscrews.
- 2D PDF (84 KB)
- D50000Z00 - Hood, top or side opening, robust and extended height, composite and plastic with rotating male jackscrews.
- D50000Z400 - Composite hood with fixed female jackscrews.
- 2D PDF (97 KB)
Feeds