One size 8, four size 20 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight solder
Press-fit PCB hole sizes
Removable contacts, female
Removable contacts, female crimp
Removable contacts, female solder
Removable contacts, male
Removable contacts, male crimp
Removable contacts, male solder
Standard Accessories
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- CBD5W1F20Z0X - Fixed solder cup termination female connector, plastic hood with rotating male jackscrews, tin plated shells.
- 2D PDF (117 KB)
- CBD5W1F2S50T20 - Fixed solder cup termination female connector, spacer with lock nut, fixed female jackscrews.
- CBD5W1M20000 - Fixed solder cup termination male connector.
- CBD5W1M2000Z - Fixed solder cup termination male connector, tin and dimpled shells.
- 2D PDF (96 KB)
- CBD5W1M2S50V50/AA - Fixed solder cup termination male connector, spacer with lock nut, vibration lock tabs, RoHS compliant.
- 2D PDF (88 KB)
PCB mount, right angle solder
- CBD5W1F55R8N00 - Right angle (90°) solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- STEP (223 KB)
- CBD5W1F57R800S - Right angle (90°) solder PCB mount female connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, stainless steel passivated shells.
- 2D PDF (157 KB)
- CBD5W1M55R8N00 - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- CBD5W1M7R600Z - Solder, metric system right angle (90°) PCB mount male connector with signal contacts only, 9.40 [0.370] signal contact extension, metal bracket swaged to connector with 3.05 [0.120] Ø mounting hole with cross bar.
- 2D PDF (86 KB)
- CBD5W1M85R80TX - Solder right angle (90°) PCB mount with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, bracket metal swaged to connector with 4-40 locknut with cross bar, fixed female jackscrews, tin plated shells.
- 2D PDF (167 KB)
- CBD5W1M85R8N0X/AA - Solder right angle (90°) PCB mount with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells, RoHS compliant.
- 2D PDF (170 KB)
- CBD5W1M85R8NTX - M85R8N0X- Solder right angle (90°) PCB mount with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, fixed female jackscrews, tin plated shells.
- 2D PDF (172 KB)
PCB mount, straight solder
- CBD5W1F35S6000 - Straight solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 4.32 [0.170] tail length.
- CBD5W1F3S600X - Straight solder PCB mount female connector, spacer with push-on fastener, tin plated shells.
- 2D PDF (63 KB)
- CBD5W1F65S60T20 - Straight PCB mount with signal and shielded contacts FDS 4201D footprint, 4.32 [0.170] signal contact tail length, spacer with push-on fastener, fixed female jackscrews.
- 2D PDF (135 KB)
- CBD5W1M35S6000 - Straight solder PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 4.32 [0.170] tail length, spacer with push-on fastener.
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- 2D PDF (251 KB)
Removable contacts, female
- FBB4000D - Size 0, for use with bus bar, female contact.
- FBB4000DS/AA - Size 0 contact for use with 0 AWG wire.
- FBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
- 2D PDF (84 KB)
Removable contacts, female crimp
- FC4006D/AA - High conductivity material, size 8 contact for use with 6 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4008DS/AA - High conductivity material, Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (79 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (78 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (81 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- 2D PDF (131 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
- FCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Removable contacts, male
- MBB4000D - Size 0, for use with bus bar, female contact.
- MBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
Removable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (83 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- 2D PDF (91 KB)
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- 2D PDF (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
- MCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- 2D PDF (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Standard Accessories
- D00000E0 - Rotating male jackscrews.
- D00000E20 - Rotating male screw locks.
- D00000E60 - Rotating male and female polarized jackscrews.
- 2D PDF (97 KB)
- D00000G0-759.0 - Blind mate guides.
- D00000T0 - Fixed female jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T20 - Fixed female jackscrews with washers.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T60 - Fixed male and female polarized jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- 2D PDF (84 KB)
- D000P000 - Threaded post.
- 2D PDF (63 KB)
- D9/370000V30 - Lock tab, connector front panel mounted.
- D9/370000V50 - Lock tab, connector rear panel mounted.
- D9000ACE0 - Lightweight aluminum hood, no finish, rotating male jackscrews.
- D9000ANE0 - Lightweight aluminum hood, nickel plate, rotating male jackscrews.
- D9000ANT20 - Lightweight aluminum hood, nickel plate, fixed female jackscrews.
- D9000ANVL0 - Lightweight aluminum hood, nickel plate, vibration lock lever.
- 2D PDF (123 KB)
- D9000GE0/AA - Hood, EMI/RFI metal, rotating male jackscrews, RoHS compliant.
- D9000GE0/AA-1023.5 - Hood, EMI/RFI metal, extended height, rotating male jackscrews, RoHS compliant.
- D9000GVL0 - Hood, EMI/RFI metal, vibration slide lock.
- D9000J00 - Hood, top opening, plastic.
- D9000JVL0 - Hood, top opening, plastic, vibration lock lever.
- D9000LVL0 - Hood, side opening, plastic, vibration slide lock.
- D9000Z00 - Hood, top or side opening, robust and extended height, composite and plastic with rotating male jackscrews.
- D9000Z400 - Composite hood with fixed female jackscrews.
Feeds