Three size 8 contacts
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight press-fit
PCB mount, straight solder
Press-fit PCB hole sizes
Removable contacts, female
Removable contacts, female crimp
Removable contacts, female solder
Removable contacts, male
Removable contacts, male crimp
Removable contacts, male solder
Standard Accessories
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- CBD3W3F00000 - Cable connector for use with female removable contacts
- IGES (105 KB)
- SolidWorks (217 KB)
- STEP (62 KB)
- CBD3W3F00000/AA - Cable connector for use with female removable contacts, RoHS compliant
- 2D PDF (99 KB)
- CBD3W3F00000/AA-759.1 - Cable connector for use with female removable contacts, RoHS compliant, blind mate panel.
- SolidWorks (276 KB)
- STEP (77 KB)
- CBD3W3F0000X-759.0 - Cable connector for use with female removable contacts, tin plated shells, blind mate guides.
- 2D PDF (98 KB)
- CBD3W3F0000X-759.1 - Cable connector for use with female removable contacts, tin plated shells, blind mate panel.
- 2D PDF (99 KB)
- CBD3W3F0000X/AA - Cable connector for use with female removable contacts, RoHS compliant
- 2D PDF (103 KB)
- CBD3W3F000E0 - Cable connector for use with female removable contacts, rotating jackscrews.
- 2D PDF (101 KB)
- CBD3W3F000E20 - Cable connector for use with female removable contacts, rotating male jackscrews.
- SolidWorks (421 KB)
- STEP (141 KB)
- CBD3W3F000E3S - Cable connector for use with female removable contacts, rotating male with internal hex for 3/32 hex drives, stainless steel passivated shells.
- 2D PDF (91 KB)
- CBD3W3F00ANVL0 - Cable connector for use with female removable contacts, lightweight aluminum hood with vibration lock lever.
- CBD3W3F00GE0-1023.5 - Cable connector for use with female removable contacts, extended height metal hood with rotating jackscrews.
- 2D PDF (104 KB)
- CBD3W3F00GEX - Cable connector for use with female removable contacts, metal hood with rotating male jackscrews, tin plated shells.
- CBD3W3F00GVLX - Cable connector for use with female removable contacts, metal hood with vibration slide lock, tin plated shells.
- 2D PDF (74 KB)
- IGES (337 KB)
- SolidWorks (1 MB)
- STEP (196 KB)
- CBD3W3F00Z00 - Cable connector for use with female removable contacts, plastic hood with rotating jackscrews.
- 2D PDF (106 KB)
- CBD3W3F0S5000/AA - Cable connector for use with female removable contacts, swaged spacer, RoHS compliant.
- 2D PDF (101 KB)
- CBD3W3F0S50T2X/AA - Cable connector for use with female removable contacts, swaged spacer, fixed female jackscrews, tin plated shells, RoHS compliant.
- 2D PDF (119 KB)
- CBD3W3M00000/AA-759.1 - Cable connector for use with male removable contacts, RoHS compliant, blind mate panel.
- 2D PDF (146 KB)
- CBD3W3M0000X-759.0 - Cable connector for use with male removable contacts, tin plated shells, blind mate guides.
- CBD3W3M0000X-759.1 - Cable connector for use with male removable contacts, tin plated shells, blind mate panel.
- 2D PDF (105 KB)
- CBD3W3M0000X/AA - Cable connector for use with male removable contacts, tin plated shells, RoHS compliant.
- 2D PDF (101 KB)
- CBD3W3M0000Z/AA - Cable connector for use with male removable contacts, tin and dimpled shells, RoHS compliant.
- 2D PDF (102 KB)
- CBD3W3M000E0/AA - Cable connector for use with male removable contacts, rotating jackscrews, RoHS compliant.
- 2D PDF (107 KB)
- CBD3W3M000E2Z - Cable connector for use with male removable contacts, rotating jackscrews, tin and dimpled shells.
- 2D PDF (53 KB)
- CBD3W3M000T2Z - Cable connector for use with male removable contacts, fixed female jackscrews, tin and dimpled shells.
- 2D PDF (241 KB)
- CBD3W3M000V3X - Cable connector for use with male removable contacts, vibration lock tab front panel mount, tin plated shells.
- 2D PDF (84 KB)
- CBD3W3M00GE0 - Cable connector for use with male removable contacts, metal hood with rotating male jackscrews.
- 2D PDF (102 KB)
- CBD3W3M00Z0Z - Cable connector for use with male removable contacts, plastic hood with rotating jackscrews, tin and dimpled shells.
- 2D PDF (74 KB)
- CBD3W3M0S0T0 - Cable connector for use with male removable contacts, spacer, fixed female jackscrews.
- IGES (200 KB)
- CBD3W3M0S5000/AA - Cable connector for use with male removable contacts, spacer with lock nut, RoHS compliant.
- 2D PDF (105 KB)
- CBD3W3M0S50T2Z - Cable connector for use with male removable contacts, spacer with lock nut, fixed female jackscrews, tin and dimpled shells.
- 2D PDF (119 KB)
PCB mount, right angle solder
- CBD3W3F55R8NT2X/AA - Right angle (90°) solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, fixed female jackscrews, tin plated shells, RoHS compliant.
- 2D PDF (116 KB)
- CBD3W3F57R7NT20 - Right angle (90°) solder PCB mount female connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 threads with cross bar, push-on fastener, fixed female jackscrews.
- 2D PDF (108 KB)
- CBD3W3F57R8N0X/AA - Right angle (90°) solder PCB mount female connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells, RoHS compliant.
- 2D PDF (114 KB)
- CBD3W3M55R8N0Z - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin dimpled shells.
- 2D PDF (109 KB)
- CBD3W3M5700T20 - Solder, right angle (90°) PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, fixed female jackscrews.
No drawings at this time - CBD3W3M57R7NT20 - Solder, right angle (90°) PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 4-40 threads with cross bar, push-on fastener, fixed female jackscrews.
- 2D PDF (109 KB)
- CBD3W3M57R8N0Z - Solder, right angle (90°) PCB mount with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin and dimpled shells.
- 2D PDF (109 KB)
- CBD3W3M57RN0Z - Solder, right angle (90°) PCB mount with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector, push-on fastener, tin and dimpled shells.
- IGES (307 KB)
- SolidWorks (628 KB)
- STEP (216 KB)
- CBD3W3M85R800X - Solder right angle (90°) PCB mount with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, bracket metal swaged to connector with 4-40 locknut with cross bar, tin plated shells.
- IGES (247 KB)
- SolidWorks (833 KB)
- STEP (154 KB)
- CBD3W3M85R8N0X - Solder right angle (90°) PCB mount with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells, RoHS compliant.
- IGES (237 KB)
- SolidWorks (663 KB)
- STEP (130 KB)
PCB mount, straight press-fit
- CBD3W3F93S00X - Straight compliant press-fit termination PCB mount female connector, spacer, tin plated shells.
- 2D PDF (105 KB)
- CBD3W3M93S00Z - Straight compliant press-fit termination PCB mount male connector, swaged spacer, tin and dimpled shells.
- 2D PDF (104 KB)
PCB mount, straight solder
- CBD3W3F35S600X - Straight solder PCB mount female connector with signal and 1.98 [0.078]
Ø power contacts, 4.32 [0.170] tail length, tin plated shells.
- 2D PDF (101 KB)
- CBD3W3F3700T20 - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, fixed female jackscrews.
- CBD3W3F37S00X/AA - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, spacer, tin plated shells, RoHS compliant.
- 2D PDF (102 KB)
- CBD3W3F37S0T0 - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, spacer, fixed female jackscrews.
- IGES (228 KB)
- CBD3W3F65S0V30 - Straight PCB mount with signal and shielded contacts FDS 4201D footprint, 4.32 [0.170] signal contact tail length, spacer, vibration lock tabs.
- 2D PDF (131 KB)
- CBD3W3M35S600X - Straight solder PCB mount male connector with signal and 1.98 [0.078]
Ø power contacts, 4.32 [0.170] tail length, spacer with push-on fastener, tin plated shells.
- 2D PDF (102 KB)
- CBD3W3M36000X-759.0 - Straight solder PCB mount male connector with signal and 2.39 [0.094] Ø power contacts, 4.32 [0.170] tail length, tin plated shells, blind mate guides.
- 2D PDF (109 KB)
- CBD3W3M3700T20 - Straight solder PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 4.32 [0.170] tail length, fixed female jackscrews.
- SolidWorks (1.9 MB)
- STEP (218 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- 2D PDF (251 KB)
Removable contacts, female
- FBB4000D - Size 0, for use with bus bar, female contact.
- FBB4000DS/AA - Size 0 contact for use with 0 AWG wire.
- FBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
- 2D PDF (84 KB)
Removable contacts, female crimp
- FC4006D/AA - High conductivity material, size 8 contact for use with 6 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4008DS/AA - High conductivity material, Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (79 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (78 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (81 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- 2D PDF (131 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
- FCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Removable contacts, male
- MBB4000D - Size 0, for use with bus bar, female contact.
- MBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
Removable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (83 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- 2D PDF (91 KB)
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- 2D PDF (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
- MCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- 2D PDF (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Standard Accessories
- D00000E0 - Rotating male jackscrews.
- D00000E20 - Rotating male screw locks.
- D00000E60 - Rotating male and female polarized jackscrews.
- 2D PDF (97 KB)
- D00000G0-759.0 - Blind mate guides.
- D00000T0 - Fixed female jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T20 - Fixed female jackscrews with washers.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T60 - Fixed male and female polarized jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- 2D PDF (84 KB)
- D000P000 - Threaded post.
- 2D PDF (63 KB)
- D15000ACE0 - Lightweight aluminum hood, no finish, rotating male jackscrews.
- D15000AN00 - Lightweight aluminum hood, nickel plate.
- IGES (486 KB)
- D15000ANE0 - Lightweight aluminum hood, nickel plate, rotating male jackscrews.
- D15000ANT20 - Lightweight aluminum hood, nickel plate, fixed female jackscrews.
- D15000ANVL0 - Lightweight aluminum hood, nickel plate, vibration lock lever.
- D15000G00 - Hood, EMI/RFI metal.
- 2D PDF (89 KB)
- D15000GA0 - EMI/RFI adapter.
- D15000GE0 - Hood, EMI/RFI metal, rotating male jackscrews.
- D15000GVL0 - Hood, EMI/RFI metal, vibration slide lock.
- D15000J00 - Hood, top opening, plastic.
- 2D PDF (94 KB)
- D15000JV30 - Hood, top opening, plastic, lock tab, connector front panel mounted.
- D15000JVL0 - Hood, top opening, plastic, vibration lock lever.
- 2D PDF (106 KB)
- D15000WE20 - Hood, top or side opening, plastic, rotating male screwlocks.
- 2D PDF (112 KB)
- D15000Z00 - Hood, top or side opening, robust and extended height, composite and plastic with rotating male jackscrews.
- D9/370000V30 - Lock tab, connector front panel mounted.
- D9/370000V50 - Lock tab, connector rear panel mounted.
Feeds