Five size 8 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight press-fit
PCB mount, straight solder
Press-fit PCB hole sizes
Removable contacts, female
Removable contacts, female crimp
Removable contacts, female solder
Removable contacts, male
Removable contacts, male crimp
Removable contacts, male solder
Standard Accessories
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- CBD5W5F00000 - Cable connector for use with female removable contacts
- CBD5W5F00000-759.1 - Cable connector for use with female removable contacts, blind mate panel.
- 2D PDF (111 KB)
- CBD5W5F0000X/AA - Cable connector for use with female removable contacts, tin plated shells, RoHS compliant.
- 2D PDF (108 KB)
- CBD5W5F000E0 - Cable connector for use with female removable contacts, rotating jackscrews.
- 2D PDF (125 KB)
- CBD5W5F000E2S - Cable connector for use with female removable contacts, rotating male jackscrews, stainless steel passivated shells.
- CBD5W5F000E30 - Cable connector for use with female removable contacts, rotating male with internal hex for 3/32 hex drives.
- CBD5W5F00GEX - Cable connector for use with female removable contacts, metal hood with rotating male jackscrews, tin plated shells.
- IGES (300 KB)
- SolidWorks (608 KB)
- STEP (135 KB)
- CBD5W5F00GVLX - Cable connector for use with female removable contacts, metal hood with vibration slide lock, tin plated shells.
- CBD5W5F00JVL0 - Cable connector for use with female removable contacts, plastic top opening hood, vibration lock lever.
- 2D PDF (128 KB)
- CBD5W5F00LVL0 - Cable connector for use with female removable contacts, plastic side opening hood, vibration lock lever.
- 2D PDF (112 KB)
- CBD5W5F00Z0X - Cable connector for use with female removable contacts, plastic hood with rotating jackscrews, tin plated shells.
- 2D PDF (118 KB)
- CBD5W5F0S500X - Cable connector for use with female removable contacts, swaged spacer with lock nut, tin plated shells.
- 2D PDF (112 KB)
- CBD5W5M00000 - Cable connector for use with male removable contacts
- STEP (69 KB)
- CBD5W5M0000S - Cable connector for use with male removable contacts, stainless steel passivated shells.
- 2D PDF (100 KB)
- CBD5W5M0000X/AA - Cable connector for use with male removable contacts, tin plated shells, RoHS compliant.
- 2D PDF (106 KB)
- CBD5W5M000V50 - Cable connector for use with male removable contacts, vibration lock tab rear panel mount.
- 2D PDF (121 KB)
- CBD5W5M00GE0 - Cable connector for use with male removable contacts, metal hood with rotating male jackscrews.
- 2D PDF (103 KB)
- CBD5W5M00Z0Z - Cable connector for use with male removable contacts, plastic hood with rotating jackscrews, tin and dimpled shells.
- 2D PDF (120 KB)
- CBD5W5M0S0T0 - Cable connector for use with male removable contacts, spacer, fixed female jackscrews.
- IGES (171 KB)
- CBD5W5M0S500S - Cable connector for use with male removable contacts, spacer with lock nut, passivated stainless steel shells.
- 2D PDF (112 KB)
PCB mount, right angle solder
- CBD5W5F55R70T20 - Right angle (90°) solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 threads with cross bar, fixed female jackscrews.
- 2D PDF (120 KB)
- CBD5W5F55R8N00 - Right angle (90°) solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- STEP (249 KB)
- CBD5W5F57R800X - Right angle (90°) solder PCB mount female connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, tin plated shells.
- 2D PDF (124 KB)
- CBD5W5F57R8N0X - Right angle (90°) solder PCB mount female connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket 90° metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells.
- 2D PDF (132 KB)
- CBD5W5M55R8000 - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar.
- 2D PDF (137 KB)
- CBD5W5M55R800X - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar, tin plated shells.
- IGES (216 KB)
- SolidWorks (736 KB)
- STEP (129 KB)
- CBD5W5M55R8N00 - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener.
- CBD5W5M55R8N0X - Solder, right angle (90°) PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 7.19 [0.283] signal contact extension., bracket metal swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells.
- IGES (302 KB)
- SolidWorks (1.7 MB)
- STEP (125 KB)
- CBD5W5M57R7NT20 - Solder, right angle (90°) PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 4-40 threads with cross bar, push-on fastener, fixed female jackscrews.
- 2D PDF (110 KB)
- CBD5W5M57R800X - Solder, right angle (90°) PCB mount with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 4-40 locknut with cross bar, tin plated shells.
- 2D PDF (125 KB)
- CBD5W5M57R8N0X - Solder, right angle (90°) PCB mount with signal and 3.18 [0.125] Ø power contacts, 7.19 [0.283] signal contact extension, bracket swaged to connector with 4-40 locknut with cross bar, push-on fastener, tin plated shells.
- 2D PDF (134 KB)
- CBD5W5M85S00S - Solder right angle (90°) PCB mount with signal and shielded contacts MRT4201D footprint, 7.19 [0.283] signal contact extension, spacer, stainless steel passivated shells.
- STEP (322 KB)
PCB mount, straight press-fit
- CBD5W5M93S0T2Z - Straight compliant press-fit termination PCB mount male connector, swaged spacer, fixed female jackscrews, tin and dimples shells.
- 2D PDF (111 KB)
PCB mount, straight solder
- CBD5W5F35S6000 - Straight solder PCB mount female connector with signal and 1.98 [0.078] Ø power contacts, 4.32 [0.170] tail length.
- CBD5W5F37S0T0 - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, spacer, fixed female jackscrews.
- IGES (211 KB)
- CBD5W5F37S600X - Solder straight PCB mount female connector with signal and 3.18 [0.125] Ø power contacts 4.32 [0.170] tail length, spacer with push-on fastener, tin plated shells.
- 2D PDF (64 KB)
- CBD5W5F65S00X - Straight PCB mount with signal and shielded contacts FDS 4201D footprint, 4.32 [0.170] signal contact tail length, spacer, tin plated shells.
- 2D PDF (69 KB)
- CBD5W5M35S6000 - Straight solder PCB mount male connector with signal and 1.98 [0.078] Ø power contacts, 4.32 [0.170] tail length, spacer with push-on fastener.
- 2D PDF (138 KB)
- CBD5W5M3700T20 - Straight solder PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 4.32 [0.170] tail length, fixed female jackscrews.
- CBD5W5M3700T2S - Straight solder PCB mount male connector with signal and 3.18 [0.125] Ø power contacts, 4.32 [0.170] tail length, fixed female jackscrews, stainless steel passivated shells.
- 2D PDF (137 KB)
- CBD5W5M65S0TS - Solder, straight PCB mount with signal and shielded contacts MDS4201D footprint, 4.32 [0.170] signal contact tail length, spacer, fixed female jackscrews, stainless steel passivated shells.
- 2D PDF (153 KB)
- IGES (466 KB)
- SolidWorks (4.1 MB)
- STEP (315 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- 2D PDF (251 KB)
Removable contacts, female
- FBB4000D - Size 0, for use with bus bar, female contact.
- FBB4000DS/AA - Size 0 contact for use with 0 AWG wire.
- FBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
- 2D PDF (84 KB)
Removable contacts, female crimp
- FC4006D/AA - High conductivity material, size 8 contact for use with 6 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4008DS/AA - High conductivity material, Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (79 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (78 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (81 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- 2D PDF (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- 2D PDF (131 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
- FCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (78 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (80 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Removable contacts, male
- MBB4000D - Size 0, for use with bus bar, female contact.
- MBB4008DS/AA - Size 8 contact for use with bus bar, RoHS compliant.
Removable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (83 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- 2D PDF (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- 2D PDF (91 KB)
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- 2D PDF (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
- MCC4104D - Size 8 shielded contact for use with RG58 B/U, crimp/crimp.
Removable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- 2D PDF (82 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- 2D PDF (81 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- 2D PDF (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- 2D PDF (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- 2D PDF (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- 2D PDF (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- 2D PDF (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
Standard Accessories
- D00000E0 - Rotating male jackscrews.
- D00000E20 - Rotating male screw locks.
- D00000E60 - Rotating male and female polarized jackscrews.
- 2D PDF (97 KB)
- D00000G0-759.0 - Blind mate guides.
- D00000T0 - Fixed female jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T20 - Fixed female jackscrews with washers.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- D00000T60 - Fixed male and female polarized jackscrews.
*T jackscrews supplied on connectors in combination with other accessories may differ dimensionally.
- 2D PDF (84 KB)
- D000P000 - Threaded post.
- 2D PDF (63 KB)
- D25000ACE0 - Lightweight aluminum hood, no finish, rotating male jackscrews.
- D25000ANE0 - Lightweight aluminum hood, nickel plate, rotating male jackscrews.
- D25000ANT20 - Lightweight aluminum hood, nickel plate, fixed female jackscrews.
- IGES (566 KB)
- D25000ANVL0 - Lightweight aluminum hood, nickel plate, vibration lock lever.
- 2D PDF (123 KB)
- D25000G00 - Hood, EMI/RFI metal.
- 2D PDF (87 KB)
- D25000GA0 - EMI/RFI adapter.
- IGES (342 KB)
- D25000GE0 - Hood, EMI/RFI metal, rotating male jackscrews.
- D25000GE0-1023.5 - Hood, EMI/RFI metal, extended height
- D25000GV50 - Hood, EMI/RFI metal, vibration lock tab.
- 2D PDF (104 KB)
- D25000GVL0 - Hood, EMI/RFI metal, vibration slide lock.
- D25000GVL0-1023.0 - Hood, EMI/RFI metal, extended height, vibration slide lock.
- 2D PDF (89 KB)
- D25000H00 - Hood, top opening, metal.
- D25000JV30 - Hood, top opening, plastic, lock tab, connector front panel mounted.
- D25000JVL0 - Hood, top opening, plastic, vibration lock lever.
- D25000L00 - Hood, side opening, plastic.
- D25000Z00/AA - Hood, top or side opening, robust and extended height, composite and plastic with rotating male jackscrews.
- D9/370000V30 - Lock tab, connector front panel mounted.
Feeds