Single row, 3 contacts rated to 42 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removable contacts, female solder
Removable contacts, male solder
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLA0300050 - Cable connector hood with strain relief
- Drawing (92 KB)
- PLA03F0000 - Cable connector for use with female removable contacts
- Drawing (79 KB)
- PLA03F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (84 KB)
- IGES (38 KB)
- SolidWorks (709 KB)
- STEP (30 KB)
- PLA03F0050/AA - Cable connector for use with female removable contacts, top opening hood, RoHS compliant
- Drawing (106 KB)
- IGES (789 KB)
- SolidWorks (1.2 MB)
- STEP (715 KB)
- PLA03F1000 - Panel mount connector for use with female removable contacts
- Drawing (98 KB)
- PLA03F1000/AA - Cable connector for use with female removable contacts, RoHS compliant.
- Drawing (101 KB)
- IGES (35 KB)
- SolidWorks (93 KB)
- STEP (18 KB)
- PLA03F10810 - Panel mount connector for use with female removable contacts, panel float mount.
- Drawing (88 KB)
- PLA03F10820 - Panel mount connector for use with female removable contacts, panel float mount.
- Drawing (84 KB)
- IGES (91 KB)
- SolidWorks (258 KB)
- STEP (58 KB)
- PLA03F200A1 - Fixed solder cup termination female connector
- Drawing (103 KB)
- PLA03F7000/AA - Cable connector for use with female removable contacts, terminating side of insulator
has c’bore for large wire sizes, RoHS compliant.
- Drawing (84 KB)
- PLA03F8000/AA - Panel mount for use with female removable contacts terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (106 KB)
- PLA03M0000 - Cable connector for use with male removable contacts
- Drawing (76 KB)
- PLA03M0000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (84 KB)
- IGES (33 KB)
- SolidWorks (101 KB)
- STEP (17 KB)
- PLA03M0050/AA - Cable connector for use with male removable contacts, top opening hood, RoHS compliant
- Drawing (104 KB)
- IGES (786 KB)
- SolidWorks (1.2 MB)
- STEP (664 KB)
- PLA03M1000 - Panel mount connector for use with male removable contacts
- Drawing (99 KB)
- PLA03M1000/AA - Cable connector supplied with male removable contacts, RoHS compliant.
- Drawing (104 KB)
- IGES (38 KB)
- SolidWorks (143 KB)
- STEP (27 KB)
- PLA03M10820 - Panel mount connector for use with male removable contacts, panel float mount
- Drawing (84 KB)
- PLA03M10830 - Panel mount connector for use with male removable contacts, panel float mount
- Drawing (100 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLA03F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (131 KB)
- PLA03F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (46 KB)
- PLA03M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (130 KB)
- PLA03M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (47 KB)
PCB mount, contacts: standard material, right angle solder
- PLA03F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (123 KB)
- PLA03M400A1/AA - Right angle (90°) PCB mount male connector, RoHS compliant
- Drawing (110 KB)
- PLA03M42B3N0A1 - Right angle PCB mount with male contacts with 9.58 [0.377] tail extension, plastic angle bracket with cross bar and push-on fastener.
- Drawing (140 KB)
- PLA03M4B0A2 - Right angle (90°) PCB mount male connector, bracket, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (111 KB)
- SolidWorks (224 KB)
- STEP (72 KB)
- PLA03M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (135 KB)
- PLA03M4BN0A1/AA - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, RoHS compliant.
- Drawing (125 KB)
- IGES (303 KB)
- SolidWorks (612 KB)
- STEP (195 KB)
- PLA04F400A1/AA - Right angle (90°) PCB mount female connector, RoHS compliant.
- Drawing (114 KB)
- IGES (74 KB)
- SolidWorks (146 KB)
- STEP (53 KB)
PCB mount, contacts: standard material, straight press-fit
- PLA03F92ST20C1 - Straight press-fit Bi-Spring type compliant termination length 4.65 [0.183] for 2.36 [0.093]
thick board. PCB mount female connector, self-tapping steel screws, 0.75μ [0.000030 inch] gold over nickel on mating end and
termination end. RoHS compliant.
- IGES (178 KB)
- SolidWorks (648 KB)
- STEP (115 KB)
- PLA03F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (46 KB)
- PLA03M9200A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (123 KB)
- PLA03M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (122 KB)
- PLA03M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (137 KB)
PCB mount, contacts: standard material, straight solder
- PLA03F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- PLA03F3N0A1 - Straight solder PCB mount female connector
- Drawing (111 KB)
- IGES (112 KB)
- SolidWorks (218 KB)
- STEP (77 KB)
- PLA03M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- Drawing (111 KB)
- IGES (65 KB)
- SolidWorks (183 KB)
- PLA03M3200A1 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension
- Drawing (108 KB)
- PLA03M3N0A1 - Straight solder PCB mount male connector
- Drawing (111 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLAH03F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (130 KB)
- PLAH03F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (46 KB)
- PLAH03M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (130 KB)
- IGES (204 KB)
- SolidWorks (469 KB)
- STEP (121 KB)
- PLAH03M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (47 KB)
PCB mount, high conductivity contacts, right angle solder
- PLAH03F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (134 KB)
- PLAH03M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (134 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLAH03F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (137 KB)
- PLAH03M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (135 KB)
PCB mount, high conductivity contacts, straight solder
- PLAH03F3N0A1 - Straight solder PCB mount female connector
- Drawing (107 KB)
- IGES (112 KB)
- SolidWorks (212 KB)
- STEP (76 KB)
- PLAH03M3N0A1 - Straight solder PCB mount male connector
- Drawing (108 KB)
- IGES (99 KB)
- SolidWorks (193 KB)
- STEP (67 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removable contacts, female solder
- FS112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (81 KB)
Removable contacts, male solder
- MS112NS - High conductivity size 16 for use with 12 AWG.
- Drawing (82 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.0 - Size 16 contact for use with 12 AWG, sequential mate 6.35 [.250] length.
- Drawing (103 KB)
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
