Single row, 4 contacts rated to 40 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLA0400050 - Cable connector hood with strain relief
- PLA04F0000 - Cable connector for use with female removable contacts
- Drawing (72 KB)
- PLA04F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (86 KB)
- IGES (40 KB)
- SolidWorks (125 KB)
- STEP (21 KB)
- PLA04F0050 - Cable connector for use with female removable contacts, top opening hood.
- Drawing (48 KB)
- IGES (797 KB)
- SolidWorks (1.1 MB)
- STEP (718 KB)
- PLA04F1000 - Panel mount connector for use with female removable contacts
- Drawing (91 KB)
- PLA04F1000 - Panel mount connector for use with female removable contacts
- Drawing (92 KB)
- IGES (39 KB)
- SolidWorks (107 KB)
- STEP (19 KB)
- PLA04F1060 - Panel mount connector for use with female removable contacts, quick release panel mount hardware.
- Drawing (96 KB)
- PLA04F200C1 - Fixed solder cup termination female connector
- IGES (105 KB)
- SolidWorks (230 KB)
- STEP (64 KB)
- PLA04F7000/AA - Cable connector for use with female removable contacts, terminating side of insulator
has c’bore for large wire sizes, RoHS compliant.
- Drawing (84 KB)
- PLA04F7050/AA - Cable connector for use with female removable contacts, terminating side of insulator has c’bore for large wire sizes, top opening hood, RoHS compliant.
- Drawing (105 KB)
- IGES (797 KB)
- SolidWorks (2.5 MB)
- STEP (695 KB)
- PLA04F80820 - Panel mount for use with female removable contacts, fixed panel mount.
- IGES (102 KB)
- SolidWorks (225 KB)
- STEP (67 KB)
- PLA04M0000 - Cable connector for use with male removable contacts
- Drawing (76 KB)
- PLA04M0000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (84 KB)
- IGES (38 KB)
- SolidWorks (106 KB)
- PLA04M0050 - Cable connector for use with male removable contacts, top opening hood.
- Drawing (48 KB)
- IGES (794 KB)
- SolidWorks (1.6 MB)
- PLA04M1000 - Panel mount connector for use with male removable contacts
- Drawing (92 KB)
- PLA04M1000/AA - Cable connector supplied with male removable contacts, RoHS compliant.
- Drawing (104 KB)
- IGES (40 KB)
- SolidWorks (99 KB)
- PLA04M200A1 - Fixed solder cup termination male connector.
- Drawing (99 KB)
- PLA04M8000/AA - Panel mount connector for use with male removable contacts Terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (104 KB)
- IGES (41 KB)
- SolidWorks (95 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLA04F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (408 KB)
- PLA04F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (323 KB)
- PLA04M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (408 KB)
- PLA04M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (323 KB)
PCB mount, contacts: standard material, right angle solder
- PLA04F4B0A1 - Right angle (90°) PCB mount female connector, plastic mounting bracket.
- Drawing (128 KB)
- IGES (132 KB)
- SolidWorks (1.3 MB)
- STEP (85 KB)
- PLA04F4B3N0A2 - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (178 KB)
- SolidWorks (819 KB)
- STEP (117 KB)
- PLA04F4BN0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, RoHS compliant.
- Drawing (133 KB)
- IGES (178 KB)
- SolidWorks (588 KB)
- STEP (115 KB)
- PLA04M400A1 - Right angle (90°) PCB mount male connector
- IGES (82 KB)
- SolidWorks (168 KB)
- PLA04M42BN0A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146]
- IGES (158 KB)
- SolidWorks (331 KB)
- PLA04M4B0A1/AA - Right angle (90°) PCB mount male connector, plastic bracket, RoHS compliant.
- PLA04M4B30A1 - Right angle (90°) PCB mount male connector, metal bracket with crossbar.
- IGES (164 KB)
- SolidWorks (344 KB)
- PLA04M4B3N0A2 - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (172 KB)
- SolidWorks (334 KB)
- PLA04M4BN0A1 - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener.
- Drawing (131 KB)
- IGES (157 KB)
- SolidWorks (306 KB)
- PLA04F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (130 KB)
- PLA04M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (137 KB)
- IGES (170 KB)
- SolidWorks (319 KB)
PCB mount, contacts: standard material, straight press-fit
- PLA04M92ST50C1 - Straight compliant press-fit termination PCB mount male connector
- IGES (146 KB)
- SolidWorks (411 KB)
- PLA04F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (323 KB)
- PLA04M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (414 KB)
- IGES (187 KB)
- SolidWorks (911 KB)
PCB mount, contacts: standard material, straight solder
- PLA03F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (113 KB)
- IGES (84 KB)
- SolidWorks (159 KB)
- STEP (54 KB)
- PLA03F3N0A1 - Straight solder PCB mount female connector, push-on fastener.
- Drawing (111 KB)
- IGES (122 KB)
- SolidWorks (313 KB)
- STEP (78 KB)
- PLA04F3N0A2 - Straight solder PCB mount female connector, push-on fastener, Gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (122 KB)
- SolidWorks (297 KB)
- STEP (79 KB)
- PLA04F3ST20A1/AA - Straight solder PCB mount female connector, self-tapping steel screws for 2.36 [0.093] thick board
- Drawing (127 KB)
- PLA04M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- Drawing (113 KB)
- IGES (73 KB)
- SolidWorks (141 KB)
- PLA04M3N0A2 - Straight solder PCB mount male connector, push-on fastener, Gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (104 KB)
- SolidWorks (254 KB)
- PLA04F3N0A1 - Straight solder PCB mount female connector
- Drawing (110 KB)
- PLA04M3N0A1 - Straight solder PCB mount male connector
- Drawing (111 KB)
- IGES (104 KB)
- SolidWorks (271 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLAH04F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (408 KB)
- PLAH04F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (130 KB)
- PLAH04M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (408 KB)
- PLAH04M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (323 KB)
PCB mount, high conductivity contacts, right angle solder
- PLAH04M4B3N0A1/AA - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, RoHS compliant.
- Drawing (418 KB)
- IGES (170 KB)
- SolidWorks (349 KB)
- STEP (110 KB)
- PLAH04F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (126 KB)
- PLAH04M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (122 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLAH04F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (322 KB)
- PLAH04M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (321 KB)
PCB mount, high conductivity contacts, straight solder
- PLAH04F32ST50C2 - Straight solder PCB mount female connector, self-tapping screws,gold over nickel on mating end and tin-lead solder coated termination end.
- IGES (182 KB)
- SolidWorks (318 KB)
- STEP (134 KB)
- PLAH04F3N0A1/AA - Straight solder PCB mount female connector, push-on fastener, RoHS compliant.
- Drawing (117 KB)
- IGES (124 KB)
- SolidWorks (219 KB)
- STEP (80 KB)
- PLAH04F3N0A1 - Straight solder PCB mount female connector
- Drawing (105 KB)
- PLAH04M3N0A1 - Straight solder PCB mount male connector
- Drawing (107 KB)
- IGES (116 KB)
- SolidWorks (213 KB)
- STEP (77 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (285 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
