Single row, 6 contacts rated to 39 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLA0600050 - Cable connector hood with strain relief
- Drawing (84 KB)
- PLA06F0000 - Cable connector for use with female removable contacts
- Drawing (79 KB)
- PLA06F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (85 KB)
- IGES (157 KB)
- SolidWorks (111 KB)
- STEP (23 KB)
- PLA06F0050/AA - Cable connector for use with female removable contacts, top opening hood, RoHS compliant
- Drawing (107 KB)
- IGES (782 KB)
- SolidWorks (1 MB)
- STEP (556 KB)
- PLA06F1000 - Panel mount connector for use with female removable contacts
- Drawing (95 KB)
- IGES (48 KB)
- SolidWorks (115 KB)
- STEP (23 KB)
- PLA06F1060 - Panel mount connector for use with female removable contacts, quick release panel mount hardware.
- Drawing (53 KB)
- PLA06F7050/AA - Cable connector for use with female removable contacts, terminating side of insulator has c’bore for large wire sizes, top opening hood, RoHS compliant.
- Drawing (105 KB)
- IGES (782 KB)
- SolidWorks (1.2 MB)
- STEP (541 KB)
- PLA06F8000/AA - Panel mount for use with female removable contacts terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (104 KB)
- IGES (48 KB)
- SolidWorks (116 KB)
- STEP (23 KB)
- PLA06F80820 - Panel mount for use with female removable contacts, fixed panel mount.
- IGES (106 KB)
- SolidWorks (294 KB)
- STEP (63 KB)
- PLA06M0000 - Cable connector for use with male removable contacts
- Drawing (79 KB)
- PLA06M0000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (85 KB)
- PLA06M1000 - Panel mount connector for use with male removable contacts
- Drawing (99 KB)
- PLA06M1000/AA - Panel mount connector for use with male removable contacts, RoHS compliant.
- Drawing (105 KB)
- IGES (50 KB)
- SolidWorks (360 KB)
- STEP (34 KB)
- PLA06M7050 - Cable connector for use with male contacts, terminating side of insulator Ø c’bore for large wire sizes, top opening hood
- IGES (782 KB)
- SolidWorks (9 MB)
- STEP (656 KB)
- PLA06M8000 - Panel mount connector for use with male removable contacts Terminating side of insulator has c’bore for large wire sizes.
- IGES (50 KB)
- SolidWorks (351 KB)
- STEP (34 KB)
- PLA06M80110 - Panel mount connector for use with male removable contacts, terminating side of insulator has c’bore for large wire sizes, blind mating system.
- Drawing (143 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLA06F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (964 KB)
- IGES (298 KB)
- SolidWorks (2 MB)
- STEP (188 KB)
- PLA06F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (876 KB)
- IGES (281 KB)
- SolidWorks (1.3 MB)
- STEP (169 KB)
- PLA06M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (963 KB)
- IGES (296 KB)
- SolidWorks (2.2 MB)
- STEP (180 KB)
- PLA06M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (431 KB)
- IGES (297 KB)
- SolidWorks (848 KB)
- STEP (179 KB)
PCB mount, contacts: standard material, right angle solder
- PLA06F400A1 - Right angle (90°) PCB mount female connector
- Drawing (100 KB)
- IGES (142 KB)
- SolidWorks (533 KB)
- STEP (91 KB)
- PLA06F4BN0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, RoHS compliant.
- Drawing (134 KB)
- PLA06M400A1/AA - Right angle (90°) PCB mount male connector, RoHS compliant
- Drawing (114 KB)
- PLA06M4BN0A2 - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (131 KB)
- PLA06F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (129 KB)
- IGES (329 KB)
- SolidWorks (451 KB)
- STEP (214 KB)
- PLA06M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (128 KB)
- IGES (225 KB)
- SolidWorks (504 KB)
- STEP (144 KB)
PCB mount, contacts: standard material, straight press-fit
- PLA06F9300A1/AA - Straight compliant press-fit termination PCB mount female connector, RoHS compliant.
- Drawing (411 KB)
- PLA06F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (323 KB)
- PLA06M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (322 KB)
PCB mount, contacts: standard material, straight solder
- PLA06F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (119 KB)
- IGES (128 KB)
- SolidWorks (185 KB)
- STEP (79 KB)
- PLA06M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- Drawing (115 KB)
- IGES (108 KB)
- SolidWorks (227 KB)
- STEP (67 KB)
- PLA06F3N0A1 - Straight solder PCB mount female connector
- Drawing (106 KB)
- SolidWorks (451 KB)
- PLA06M3N0A1 - Straight solder PCB mount male connector
- Drawing (114 KB)
- IGES (142 KB)
- SolidWorks (218 KB)
- STEP (94 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLAH06F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (965 KB)
- PLAH06F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (875 KB)
- PLAH06M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (964 KB)
- PLAH06M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (876 KB)
PCB mount, high conductivity contacts, right angle solder
- PLAH06F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (130 KB)
- PLAH06M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (129 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLAH06F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (323 KB)
- PLAH06M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (322 KB)
PCB mount, high conductivity contacts, straight solder
- PLAH06F3N0A1 - Straight solder PCB mount female connector
- Drawing (114 KB)
- PLAH06M3N0A1 - Straight solder PCB mount male connector
- Drawing (114 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (249 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
