Single row, 8 contacts rated to 35 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removable contacts, female solder
Removable contacts, male solder
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLA0800050 - Cable connector hood with strain relief
- Drawing (88 KB)
- PLA08F0000 - Cable connector for use with female removable contacts
- Drawing (78 KB)
- PLA08F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (86 KB)
- IGES (56 KB)
- SolidWorks (159 KB)
- STEP (26 KB)
- PLA08F0050 - Cable connector for use with female removable contacts, top opening hood.
- Drawing (94 KB)
- PLA08F1000 - Panel mount connector for use with female removable contacts
- Drawing (95 KB)
- PLA08F10120 - Panel mount connector for use with female removable contacts, blind mating system.
- IGES (111 KB)
- SolidWorks (224 KB)
- STEP (75 KB)
- PLA08F7050/AA - Cable connector for use with female removable contacts, terminating side of insulator has c’bore for large wire sizes, top opening hood, RoHS compliant.
- Drawing (107 KB)
- PLA08F80110/AA - Panel mount for use with female removable contacts, blind mating system, RoHS compliant.
- Drawing (120 KB)
- PLA08M0000 - Cable connector for use with male removable contacts
- Drawing (77 KB)
- IGES (53 KB)
- SolidWorks (96 KB)
- STEP (37 KB)
- PLA08M0050 - Cable connector for use with male removable contacts, top opening hood.
- Drawing (102 KB)
- PLA08M1000 - Panel mount connector for use with male removable contacts
- Drawing (98 KB)
- PLA08M1000/AA - Panel mount connector for use with male removable contacts, RoHS compliant.
- Drawing (105 KB)
- PLA08M7050/AA - Cable connector for use with male contacts, terminating side of insulator Ø c’bore for large wire sizes, top opening hood, RoHS compliant
- Drawing (109 KB)
- PLA08M8000/AA - Panel mount connector for use with male removable contacts Terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (122 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLA08F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (416 KB)
- IGES (374 KB)
- SolidWorks (1.2 MB)
- STEP (218 KB)
- PLA08F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (325 KB)
- PLA08M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (414 KB)
- PLA08M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (326 KB)
PCB mount, contacts: standard material, right angle solder
- PLA08F4B3N0A1 - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, push-on fastener.
- Drawing (131 KB)
- PLA08M400A1/AA - Right angle (90°) PCB mount male connector, RoHS compliant
- Drawing (115 KB)
- PLA08M4B0A1 - Right angle (90°) PCB mount male connector, plastic bracket.
- IGES (195 KB)
- SolidWorks (273 KB)
- STEP (122 KB)
- PLA08M4BN0A1/AA - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, RoHS compliant.
- Drawing (139 KB)
- PLA08F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (130 KB)
- PLA08M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (128 KB)
PCB mount, contacts: standard material, straight press-fit
- PLA08F9300A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (403 KB)
- IGES (256 KB)
- SolidWorks (1.9 MB)
- STEP (159 KB)
- PLA08M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (408 KB)
- PLA08F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (325 KB)
- PLA08M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (323 KB)
PCB mount, contacts: standard material, straight solder
- PLA08F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (123 KB)
- IGES (147 KB)
- SolidWorks (199 KB)
- STEP (98 KB)
- PLA08F3N0A1 - Straight solder PCB mount female connector, push-on fastener.
- Drawing (115 KB)
- PLA08M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- Drawing (120 KB)
- PLA08F3N0A1 - Straight solder PCB mount female connector
- Drawing (114 KB)
- PLA08M3N0A1 - Straight solder PCB mount male connector
- Drawing (113 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLAH08F62B30A1/AA - Right angle (90°) press-fit termination PCB mount female connector, angle bracket, RoHS compliant.
- Drawing (425 KB)
- IGES (374 KB)
- SolidWorks (1.3 MB)
- STEP (229 KB)
- PLAH08M62B30A1/AA - Right angle (90°) press-fit termination PCB mount male connector, RoHS compliant
- Drawing (426 KB)
- IGES (371 KB)
- SolidWorks (2.7 MB)
- STEP (229 KB)
- PLAH08F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (416 KB)
- PLAH08F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (325 KB)
- PLAH08M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (415 KB)
- PLAH08M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (325 KB)
PCB mount, high conductivity contacts, right angle solder
- PLAH08F4200A1/AA - Right angle (90°) PCB mount female connector with 9.58 [0.377] tail extension, RoHS compliant.
- Drawing (116 KB)
- PLAH08M4200A1/AA - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146], RoHS compliant.
- Drawing (119 KB)
- PLAH08F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (126 KB)
- PLAH08M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (126 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLAH08M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (405 KB)
- PLAH08F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (324 KB)
- PLAH08M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (323 KB)
PCB mount, high conductivity contacts, straight solder
- PLAH08F3N0A1 - Straight solder PCB mount female connector
- Drawing (108 KB)
- PLAH08M3N0A1 - Straight solder PCB mount male connector
- Drawing (109 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (286 KB)
Removable contacts, female solder
- FS112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (81 KB)
Removable contacts, male solder
- MS112NS - High conductivity size 16 for use with 12 AWG.
- Drawing (82 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.0 - Size 16 contact for use with 12 AWG, sequential mate 6.35 [.250] length.
- Drawing (103 KB)
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
