Double row, 6 contacts rated to 39 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLB0600050 - Cable connector hood with strain relief
- Drawing (80 KB)
- PLB0600050/AA - Cable connector hood with strain relief, RoHS compliant.
- Drawing (87 KB)
- PLB06F0000 - Cable connector for use with female removable contacts
- Drawing (86 KB)
- PLB06F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (85 KB)
- IGES (48 KB)
- SolidWorks (321 KB)
- STEP (35 KB)
- PLB06F0050 - Cable connector for use with female removable contacts, top opening hood.
- Drawing (94 KB)
- IGES (768 KB)
- SolidWorks (1.1 MB)
- STEP (519 KB)
- PLB06F1000 - Panel mount connector for use with female removable contacts
- Drawing (103 KB)
- PLB06F10110 - Panel mount connector for use with female removable contacts, blind mating system.
- Drawing (135 KB)
- PLB06F10120 - Panel mount connector for use with female removable contacts, blind mating system.
- IGES (133 KB)
- SolidWorks (339 KB)
- STEP (86 KB)
- PLB06F1060 - Panel mount connector for use with female removable contacts, quick release panel mount hardware.
- Drawing (99 KB)
- PLB06F10820/AA - Panel mount connector for use with female removable contacts, panel float mount, RoHS compliant.
- Drawing (110 KB)
- PLB06F200A1 - Fixed solder cup termination female connector
- Drawing (100 KB)
- PLB06F7000/AA - Cable connector for use with female removable contacts, terminating side of insulator
has c’bore for large wire sizes, RoHS compliant.
- Drawing (86 KB)
- IGES (48 KB)
- SolidWorks (119 KB)
- STEP (23 KB)
- PLB06F7050/AA - Cable connector for use with female removable contacts, terminating side of insulator has c’bore for large wire sizes, top opening hood, RoHS compliant.
- Drawing (90 KB)
- PLB06F8000/AA - Panel mount for use with female removable contacts terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (107 KB)
- PLB06M0000 - Cable connector for use with male removable contacts
- Drawing (81 KB)
- PLB06M0000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (85 KB)
- PLB06M0050 - Cable connector for use with male removable contacts, top opening hood.
- Drawing (104 KB)
- IGES (767 KB)
- SolidWorks (1.3 MB)
- STEP (546 KB)
- PLB06M1000 - Panel mount connector for use with male removable contacts
- Drawing (108 KB)
- PLB06M1000/AA - Panel mount connector for use with male removable contacts, RoHS compliant.
- Drawing (106 KB)
- IGES (47 KB)
- SolidWorks (118 KB)
- STEP (22 KB)
- PLB06M200A1/AA - Fixed solder cup termination male connector, RoHS compliant.
- Drawing (102 KB)
- PLB06M200C1 - Fixed solder cup termination male connector, gold over nickel on mating end and
termination end.
- IGES (204 KB)
- PLB06M206C1 - Fixed solder cup termination male connector, quick release panel mount.
- SolidWorks (324 KB)
- STEP (130 KB)
- PLB06M7000 - Cable connector supplied with erminating side of insulator
has c’bore for large wire sizes.
- Drawing (76 KB)
- PLB06M7050 - Cable connector for use with male contacts, terminating side of insulator Ø c’bore for large wire sizes, top opening hood
- Drawing (103 KB)
- PLB06M8000/AA - Panel mount connector for use with male removable contacts Terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (105 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLB06F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector, angle bracket.
- Drawing (412 KB)
- PLB06F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (964 KB)
- PLB06F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (324 KB)
- PLB06M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (963 KB)
- PLB06M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (324 KB)
PCB mount, contacts: standard material, right angle solder
- PLB06F400A1 - Right angle (90°) PCB mount female connector
- Drawing (121 KB)
- PLB06F4B0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, RoHS compliant.
- Drawing (123 KB)
- IGES (151 KB)
- SolidWorks (470 KB)
- STEP (99 KB)
- PLB06F4B3N0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, push-on fastener, RoHS compliant.
- PLB06F4B3N0A2 - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (209 KB)
- SolidWorks (551 KB)
- STEP (142 KB)
- PLB06F4BN0A1 - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener.
- Drawing (114 KB)
- PLB06M400A1 - Right angle (90°) PCB mount male connector
- Drawing (102 KB)
- PLB06M4B0A1 - Right angle (90°) PCB mount male connector, plastic bracket.
- Drawing (121 KB)
- PLB06M4B0C2 - Right angle (90°) PCB mount male connector, bracket, gold over nickel on mating end and tin-lead solder coat on termination end.
- IGES (165 KB)
- SolidWorks (268 KB)
- STEP (105 KB)
- PLB06M4BN0A1 - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener.
- Drawing (128 KB)
- IGES (208 KB)
- SolidWorks (338 KB)
- STEP (134 KB)
- PLB06F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (129 KB)
- PLB06M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (129 KB)
PCB mount, contacts: standard material, straight press-fit
- PLB06F9200A1/AA - Straight compliant press-fit termination PCB mount female connector, RoHS compliant.
- Drawing (408 KB)
- PLB06F92ST20A1/AA - Straight press-fit Bi-Spring type compliant termination length 4.65 [0.183] for 2.36 [0.093] thick board. PCB mount female connector, self-tapping steel screws, RoHS compliant.
- Drawing (415 KB)
- PLB06M9300C1/AA - Straight compliant press-fit termination PCB mount male connector, 0.75 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (185 KB)
- SolidWorks (249 KB)
- STEP (111 KB)
- PLB06M93ST30A1/AA - Straight compliant press-fit termination PCB mount male connector, self-tapping steel screws for 3.18 [0.125] thick board, RoHS compliant.
- Drawing (409 KB)
- IGES (185 KB)
- SolidWorks (305 KB)
- STEP (115 KB)
- PLB06F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (323 KB)
- IGES (216 KB)
- SolidWorks (302 KB)
- STEP (125 KB)
- PLB06M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (416 KB)
PCB mount, contacts: standard material, straight solder
- PLB06F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (117 KB)
- IGES (105 KB)
- SolidWorks (155 KB)
- STEP (68 KB)
- PLB06F300C2 - Straight solder PCB mount female connector, gold over nickel on mating end and
tin-lead solder coated termination end.
- SolidWorks (240 KB)
- STEP (68 KB)
- PLB06F3200A1 - Straight solder PCB mount female connector with 9.58 [0.377] tail length.
- PLB06F32ST50C2 - Straight solder PCB mount female connector, self-tapping screws,gold over nickel on mating end and tin-lead solder coated termination end.
- IGES (202 KB)
- SolidWorks (320 KB)
- STEP (151 KB)
- PLB06F3N0A2 - Straight solder PCB mount female connector, push-on fastener, Gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (140 KB)
- SolidWorks (202 KB)
- STEP (92 KB)
- PLB06M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- Drawing (123 KB)
- IGES (93 KB)
- SolidWorks (214 KB)
- STEP (63 KB)
- PLB06M300C2 - Straight solder PCB mount male connector, gold over nickel on mating end and
tin-lead solder coated termination end.
- IGES (93 KB)
- SolidWorks (196 KB)
- STEP (62 KB)
- PLB06M3200A1 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension
- PLB06M32ST50C2 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension, self-tapping screws, gold over nickel on mating end and
tin-lead solder coated termination end.
- IGES (192 KB)
- SolidWorks (359 KB)
- STEP (144 KB)
- PLB06M3N0A1/AA - Straight solder PCB mount male connector, push-on fastener, RoHS compliant.
- Drawing (122 KB)
- IGES (126 KB)
- SolidWorks (187 KB)
- STEP (77 KB)
- PLB06F3N0A1 - Straight solder PCB mount female connector
- Drawing (120 KB)
- PLB06M3N0A1 - Straight solder PCB mount male connector
- Drawing (118 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLBH06F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (965 KB)
- PLBH06F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (324 KB)
- PLBH06M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (964 KB)
- PLBH06M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (323 KB)
PCB mount, high conductivity contacts, right angle solder
- PLBH06F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (130 KB)
- PLBH06M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (129 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLBH06M9300C1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (404 KB)
- IGES (185 KB)
- SolidWorks (260 KB)
- STEP (111 KB)
- PLBH06M93ST30C1/AA - Straight compliant press-fit termination PCB mount male connector, self-tapping steel screws for 3.18 [0.125] thick board, RoHS compliant.
- Drawing (413 KB)
- IGES (185 KB)
- SolidWorks (260 KB)
- STEP (110 KB)
- PLBH06F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (323 KB)
- PLBH06M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (322 KB)
PCB mount, high conductivity contacts, straight solder
- PLBH06F3N0C2 - Straight solder PCB mount female connector, push-on fastener, gold over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (126 KB)
- PLBH06M32ST50C2 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension, self-tapping screws, gold over nickel on mating end and
tin-lead solder coated termination end.
- IGES (192 KB)
- SolidWorks (355 KB)
- STEP (141 KB)
- PLBH06M3N0C2 - Straight solder PCB mount male connector, push-on fastener, gold over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (124 KB)
- PLBH06F3N0A1 - Straight solder PCB mount female connector
- Drawing (115 KB)
- PLBH06M3N0A1 - Straight solder PCB mount male connector
- Drawing (115 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (249 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
