Double row, 8 contacts rated to 36 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLB0800050 - Cable connector hood with strain relief
- Drawing (80 KB)
- PLB0800050/AA - Cable connector hood with strain relief, RoHS compliant.
- Drawing (86 KB)
- PLB08F0000 - Cable connector for use with female removable contacts
- Drawing (84 KB)
- PLB08F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (86 KB)
- IGES (57 KB)
- SolidWorks (133 KB)
- STEP (40 KB)
- PLB08F0050/AA - Cable connector for use with female removable contacts, top opening hood, RoHS compliant
- Drawing (107 KB)
- IGES (799 KB)
- SolidWorks (1.3 MB)
- STEP (682 KB)
- PLB08F1000 - Panel mount connector for use with female removable contacts
- Drawing (103 KB)
- PLB08F1000/AA - Cable connector for use with female removable contacts, RoHS compliant.
- Drawing (107 KB)
- PLB08F10110/AA - Panel mount connector for use with female removable contacts, blind mating system, RoHS compliant.
- IGES (142 KB)
- SolidWorks (647 KB)
- STEP (90 KB)
- PLB08F1060/AA - Panel mount connector for use with female removable contacts, quick release panel mount hardware, RoHS compliant.
- Drawing (107 KB)
- PLB08F10830 - Panel mount connector for use with female removable contacts, panel float mount.
- IGES (105 KB)
- SolidWorks (223 KB)
- STEP (45 KB)
- PLB08F200A1/AA - Fixed solder cup termination female connector, RoHS compliant.
- PLB08F7000/AA - Cable connector for use with female removable contacts, terminating side of insulator
has c’bore for large wire sizes, RoHS compliant.
- PLB08F7050/AA - Cable connector for use with female removable contacts, terminating side of insulator has c’bore for large wire sizes, top opening hood, RoHS compliant.
- IGES (608 KB)
- PLB08F8000/AA - Panel mount for use with female removable contacts terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- IGES (58 KB)
- SolidWorks (469 KB)
- STEP (36 KB)
- PLB08M0000 - Cable connector for use with male removable contacts
- Drawing (84 KB)
- PLB08M0000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (85 KB)
- IGES (52 KB)
- SolidWorks (116 KB)
- STEP (36 KB)
- PLB08M0050/AA - Cable connector for use with male removable contacts, top opening hood, RoHS compliant
- Drawing (95 KB)
- IGES (794 KB)
- SolidWorks (1.1 MB)
- STEP (684 KB)
- PLB08M1000 - Panel mount connector for use with male removable contacts
- Drawing (103 KB)
- PLB08M1000/AA - Panel mount connector for use with male removable contacts, RoHS compliant.
- Drawing (106 KB)
- IGES (58 KB)
- SolidWorks (183 KB)
- STEP (38 KB)
- PLB08M7000/AA - Cable connector supplied with erminating side of insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (85 KB)
- PLB08M7050/AA - Cable connector for use with male contacts, terminating side of insulator Ø c’bore for large wire sizes, top opening hood, RoHS compliant
- Drawing (106 KB)
- IGES (792 KB)
- SolidWorks (1.3 MB)
- STEP (706 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLB08F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (418 KB)
- IGES (329 KB)
- SolidWorks (3.4 MB)
- STEP (197 KB)
- PLB08F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (325 KB)
- PLB08F63B3N0A1/AA - Right angle (90°) press-fit termination PCB mount female connector, angle bracket, RoHS compliant.
- Drawing (147 KB)
- PLB08M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (415 KB)
- PLB08M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (326 KB)
- PLB08M63B30A1/AA - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219], RoHS Compliant.
- Drawing (422 KB)
- IGES (328 KB)
- SolidWorks (6.5 MB)
- STEP (209 KB)
PCB mount, contacts: standard material, right angle solder
- PLB08F400A1/AA - Right angle (90°) PCB mount female connector, RoHS compliant.
- Drawing (121 KB)
- IGES (158 KB)
- SolidWorks (230 KB)
- STEP (96 KB)
- PLB08F4B0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, RoHS compliant.
- Drawing (135 KB)
- IGES (186 KB)
- SolidWorks (262 KB)
- STEP (117 KB)
- PLB08F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (134 KB)
- PLB08F4B3N0A2 - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- PLB08F4BN0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, RoHS compliant.
- Drawing (136 KB)
- PLB08F4BN0C2/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, RoHS compliant.
- IGES (233 KB)
- SolidWorks (333 KB)
- STEP (149 KB)
- PLB08M400A1/AA - Right angle (90°) PCB mount male connector, RoHS compliant
- Drawing (118 KB)
- IGES (127 KB)
- SolidWorks (230 KB)
- STEP (87 KB)
- PLB08M4200A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146]
- Drawing (126 KB)
- IGES (130 KB)
- SolidWorks (435 KB)
- STEP (85 KB)
- PLB08M4B0A1 - Right angle (90°) PCB mount male connector, plastic bracket.
- Drawing (114 KB)
- IGES (169 KB)
- SolidWorks (569 KB)
- STEP (113 KB)
- PLB08M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (139 KB)
- PLB08M4B3N0A1/AA - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, RoHS compliant.
- Drawing (141 KB)
- PLB08M4B3N0A2 - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (220 KB)
- SolidWorks (488 KB)
- STEP (139 KB)
- PLB08M4BN0A1 - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener.
- Drawing (131 KB)
PCB mount, contacts: standard material, straight press-fit
- PLB08F9300A1/AA - Straight compliant press-fit termination PCB mount female connector, RoHS compliant.
- Drawing (413 KB)
- PLB08F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (324 KB)
- PLB08M9200A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (324 KB)
- PLB08M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (127 KB)
- PLB08M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (323 KB)
PCB mount, contacts: standard material, straight solder
- PLB08F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- PLB08F300A2 - Straight solder PCB mount female connector, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (126 KB)
- PLB08F3200A1 - Straight solder PCB mount female connector with 9.58 [0.377] tail length.
- Drawing (115 KB)
- IGES (142 KB)
- SolidWorks (322 KB)
- STEP (88 KB)
- PLB08F32N0A1/AA - Straight solder PCB mount female connector with 9.58 [0.377] tail length.
- Drawing (125 KB)
- PLB08F3N0A1 - Straight solder PCB mount female connector
- Drawing (121 KB)
- PLB08F3N0A2 - Straight solder PCB mount female connector, push-on fastener, Gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (179 KB)
- SolidWorks (230 KB)
- STEP (111 KB)
- PLB08M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- Drawing (125 KB)
- IGES (109 KB)
- SolidWorks (174 KB)
- STEP (75 KB)
- PLB08M3N0A1 - Straight solder PCB mount male connector
- PLB08M3ST20A1 - Straight solder PCB mount male connector, self-tapping screws.
- IGES (178 KB)
- SolidWorks (318 KB)
- STEP (134 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLBH08F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (418 KB)
- IGES (394 KB)
- SolidWorks (5.4 MB)
- STEP (226 KB)
- PLBH08F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (328 KB)
- PLBH08M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (416 KB)
- PLBH08M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (419 KB)
PCB mount, high conductivity contacts, right angle solder
- PLBH08F4B0A1 - Right angle (90°) PCB mount female connector, plastic mounting bracket.
- IGES (189 KB)
- SolidWorks (269 KB)
- STEP (117 KB)
- PLBH08F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (135 KB)
- PLBH08F4BN0C2/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, RoHS compliant.
- Drawing (152 KB)
- IGES (233 KB)
- SolidWorks (333 KB)
- STEP (146 KB)
- PLBH08M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (135 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLBH08F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (418 KB)
- PLBH08M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (412 KB)
PCB mount, high conductivity contacts, straight solder
- PLBH08F3N0A1 - Straight solder PCB mount female connector
- Drawing (118 KB)
- PLBH08M3N0A1 - Straight solder PCB mount male connector
- Drawing (118 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (249 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
