Double row, 12 contacts rated to 32 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removable contacts, female solder
Removable contacts, male solder
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLB1200050 - Cable connector hood with strain relief
- Drawing (87 KB)
- PLB12F0000 - Cable connector for use with female removable contacts
- Drawing (79 KB)
- PLB12F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (87 KB)
- IGES (71 KB)
- SolidWorks (137 KB)
- STEP (30 KB)
- PLB12F0050 - Cable connector for use with female removable contacts, top opening hood.
- IGES (777 KB)
- SolidWorks (1.4 MB)
- STEP (697 KB)
- PLB12F1000 - Panel mount connector for use with female removable contacts
- Drawing (91 KB)
- PLB12F1000/AA - Panel mount connector for use with female removable contacts, RoHS compliant.
- Drawing (107 KB)
- IGES (67 KB)
- SolidWorks (131 KB)
- STEP (110 KB)
- PLB12F10120/AA - Panel mount connector for use with female removable contacts, blind mating system, RoHS compliant.
- Drawing (128 KB)
- PLB12F10130 - Panel mount connector for use with female removable contacts, blind mating system.
- PLB12F1060 - Panel mount connector for use with female removable contacts, quick release panel mount hardware.
- IGES (131 KB)
- SolidWorks (233 KB)
- STEP (71 KB)
- PLB12F10820 - Panel mount connector for use with female removable contacts, panel float mount.
- IGES (124 KB)
- SolidWorks (236 KB)
- STEP (70 KB)
- PLB12F10830/AA - Panel mount connector for use with female removable contacts, panel float mount, RoHS compliant.
- IGES (127 KB)
- SolidWorks (336 KB)
- STEP (80 KB)
- PLB12F206A1 - Fixed solder cup termination female connector, quick release panel mount hardware.
- Drawing (121 KB)
- IGES (398 KB)
- SolidWorks (562 KB)
- STEP (222 KB)
- PLB12F7000 - Cable connector for use with female removable contacts, terminating side of insulator
has c’bore for large wire sizes, RoHS compliant.
- Drawing (73 KB)
- IGES (92 KB)
- SolidWorks (145 KB)
- STEP (37 KB)
- PLB12F7050 - Cable connector for use with female removable contacts, terminating side of insulator has c’bore for large wire sizes, top opening hood.
- Drawing (107 KB)
- PLB12F8000/AA - Panel mount for use with female removable contacts terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (107 KB)
- IGES (87 KB)
- SolidWorks (156 KB)
- STEP (56 KB)
- PLB12F8060/AA - Panel mount connector for use with removable female contacts terminating side of insulator has c’bore for large wire sizes, quick release panel mount hardware, RoHS compliant.
- Drawing (103 KB)
- IGES (131 KB)
- SolidWorks (219 KB)
- STEP (75 KB)
- PLB12F80820 - Panel mount for use with female removable contacts, fixed panel mount.
- Drawing (98 KB)
- IGES (124 KB)
- SolidWorks (242 KB)
- STEP (70 KB)
- PLB12M0000 - Cable connector for use with male removable contacts
- Drawing (78 KB)
- IGES (69 KB)
- SolidWorks (118 KB)
- STEP (27 KB)
- PLB12M0050 - Cable connector for use with male removable contacts, top opening hood.
- Drawing (102 KB)
- IGES (799 KB)
- SolidWorks (1.2 MB)
- STEP (671 KB)
- PLB12M1000 - Panel mount connector for use with male removable contacts
- Drawing (94 KB)
- PLB12M1000/AA - Panel mount connector for use with male removable contacts, RoHS compliant.
- Drawing (107 KB)
- IGES (71 KB)
- SolidWorks (126 KB)
- STEP (45 KB)
- PLB12M10120 - Panel mount connector for use with male removable contacts, blind mating system.
- Drawing (138 KB)
- PLB12M10140 - Panel mount connector for use with male removable contacts, blind mating system.
- IGES (159 KB)
- SolidWorks (673 KB)
- STEP (97 KB)
- PLB12M1060 - Panel mount connector for use with male removable contacts, quick release panel mount hardware.
- IGES (129 KB)
- SolidWorks (227 KB)
- STEP (70 KB)
- PLB12M10820 - Panel mount connector for use with male removable contacts, panel float mount
- IGES (125 KB)
- SolidWorks (219 KB)
- STEP (77 KB)
- PLB12M10830 - Panel mount connector for use with male removable contacts, panel float mount
- IGES (123 KB)
- SolidWorks (230 KB)
- STEP (79 KB)
- PLB12M7000/AA - Cable connector supplied with erminating side of insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (87 KB)
- IGES (90 KB)
- SolidWorks (130 KB)
- STEP (33 KB)
- PLB12M7050/AA - Cable connector for use with male contacts, terminating side of insulator Ø c’bore for large wire sizes, top opening hood, RoHS compliant
- Drawing (107 KB)
- IGES (1.6 MB)
- SolidWorks (2.8 MB)
- STEP (1.2 MB)
- PLB12M8000/AA - Panel mount connector for use with male removable contacts Terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (107 KB)
- IGES (86 KB)
- SolidWorks (147 KB)
- STEP (54 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLB12F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (421 KB)
- PLB12F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (326 KB)
- PLB12M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (418 KB)
- PLB12M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (325 KB)
- IGES (432 KB)
- SolidWorks (746 KB)
- STEP (258 KB)
PCB mount, contacts: standard material, right angle solder
- PLB12F400A1/AA - Right angle (90°) PCB mount female connector, RoHS compliant.
- Drawing (125 KB)
- PLB12F400A2 - ght angle (90°) PCB mount female connector, Gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (130 KB)
- PLB12F4200A1 - Right angle (90°) PCB mount female connector with 9.58 [0.377] tail extension.
- IGES (202 KB)
- SolidWorks (385 KB)
- STEP (130 KB)
- PLB12F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (129 KB)
- PLB12F4BN0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, RoHS compliant.
- Drawing (140 KB)
- PLB12F4BN0C1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (144 KB)
- PLB12M400A1 - Right angle (90°) PCB mount male connector
- Drawing (114 KB)
- PLB12M400A2 - Right angle (90°) PCB mount male connector, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (128 KB)
- PLB12M42B0A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146]
- Drawing (127 KB)
- PLB12M4B0A1/AA - Right angle (90°) PCB mount male connector, plastic bracket, RoHS compliant.
- Drawing (135 KB)
- IGES (268 KB)
- SolidWorks (581 KB)
- STEP (169 KB)
- PLB12M4B30A1/AA - Right angle (90°) PCB mount male connector, metal bracket with crossbar, RoHS compliant.
- Drawing (140 KB)
- PLB12M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (130 KB)
- PLB12M4B3N0A1/AA - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, RoHS compliant.
- Drawing (143 KB)
- PLB12M4BN0A1 - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener.
- IGES (306 KB)
- SolidWorks (380 KB)
- STEP (195 KB)
PCB mount, contacts: standard material, straight press-fit
- PLB12F9200A1/AA - Straight press-fit Bi-Spring type compliant termination length 4.65 [0.183] for 2.36 [0.093] thick board. PCB mount female connector, RoHS compliant.
- Drawing (410 KB)
- PLB12F9300C1/AA - Straight compliant press-fit termination PCB mount female connector, 0.75 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (412 KB)
- PLB12F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (324 KB)
- IGES (522 KB)
- SolidWorks (3.6 MB)
- STEP (193 KB)
- PLB12M92ST20A1/AA - Straight PCB mount press-fit, length 4.65 [0.183] for 2.36 [0.093] thick board, self-tapping screws, RoHS compliant.
- IGES (347 KB)
- SolidWorks (1.5 MB)
- STEP (205 KB)
- PLB12M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (324 KB)
PCB mount, contacts: standard material, straight solder
- PLB12F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (121 KB)
- IGES (169 KB)
- SolidWorks (549 KB)
- STEP (106 KB)
- PLB12F3200A1 - Straight solder PCB mount female connector with 9.58 [0.377] tail length.
- IGES (169 KB)
- SolidWorks (453 KB)
- STEP (110 KB)
- PLB12F3N0A1 - Straight solder PCB mount female connector
- Drawing (118 KB)
- PLB12F3N0A1/AA - Straight solder PCB mount female connector, push-on fastener, RoHS compliant.
- Drawing (127 KB)
- PLB12M300A1 - Straight solder PCB mount male connector
- Drawing (123 KB)
- PLB12M300C1 - Straight solder PCB mount male connector, 0.000030 inch [0.75μ] gold over nickel.
- Drawing (117 KB)
- PLB12M300C2 - Straight solder PCB mount male connector, gold over nickel on mating end and
tin-lead solder coated termination end.
- IGES (191 KB)
- SolidWorks (223 KB)
- STEP (121 KB)
- PLB12M3200A1 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension
- IGES (157 KB)
- SolidWorks (935 KB)
- STEP (98 KB)
- PLB12M3N0A1 - Straight solder PCB mount male connector
- Drawing (113 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLBH12F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (420 KB)
- PLBH12F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (426 KB)
- PLBH12M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (418 KB)
- PLBH12M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (423 KB)
- PLBH12M63B30A1/AA - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219], RoHS Compliant.
PCB mount, high conductivity contacts, right angle solder
- PLBH12F42B0A1 - Right angle (90°) PCB mount female connector with 9.58 [0.377] tail extension, mounting bracket.
- IGES (242 KB)
- SolidWorks (385 KB)
- PLBH12F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (130 KB)
- PLBH12F4BN0C2/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and tin-lead solder coated termination end, RoHS compliant.
- Drawing (152 KB)
- IGES (288 KB)
- SolidWorks (431 KB)
- STEP (189 KB)
- PLBH12M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (129 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLBH12F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (418 KB)
- PLBH12M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (413 KB)
- PLBH12M93ST30C1/AA - Straight compliant press-fit termination PCB mount male connector, self-tapping steel screws for 3.18 [0.125] thick board, 0.000030 inch [0.75μ] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (361 KB)
- SolidWorks (2 MB)
- STEP (217 KB)
PCB mount, high conductivity contacts, straight solder
- PLBH12F3200A1 - Straight solder PCB mount female connector with 9.58 [0.377] tail length.
- SolidWorks (251 KB)
- STEP (116 KB)
- PLBH12F3N0A1 - Straight solder PCB mount female connector
- Drawing (115 KB)
- PLBH12M3200A1 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension
- IGES (179 KB)
- SolidWorks (264 KB)
- STEP (121 KB)
- PLBH12M3N0A1 - Straight solder PCB mount male connector
- Drawing (113 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (286 KB)
Removable contacts, female solder
- FS112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (81 KB)
Removable contacts, male solder
- MS112NS - High conductivity size 16 for use with 12 AWG.
- Drawing (82 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.0 - Size 16 contact for use with 12 AWG, sequential mate 6.35 [.250] length.
- Drawing (103 KB)
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
