Double row, 16 contacts rated to 29 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLB1600050 - Cable connector hood with strain relief
- Drawing (88 KB)
- PLB16F0000 - Cable connector for use with female removable contacts
- Drawing (81 KB)
- PLB16F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (89 KB)
- IGES (88 KB)
- SolidWorks (130 KB)
- STEP (34 KB)
- PLB16F0050 - Cable connector for use with female removable contacts, top opening hood.
- Drawing (102 KB)
- IGES (806 KB)
- SolidWorks (1.2 MB)
- STEP (713 KB)
- PLB16F1000 - Panel mount connector for use with female removable contacts
- Drawing (93 KB)
- PLB16F1000/AA - Panel mount connector for use with female removable contacts, RoHS compliant.
- Drawing (109 KB)
- IGES (90 KB)
- SolidWorks (503 KB)
- STEP (53 KB)
- PLB16F10120 - Panel mount connector for use with female removable contacts, blind mating system.
- Drawing (137 KB)
- PLB16F10130 - Panel mount connector for use with female removable contacts, blind mating system.
- IGES (163 KB)
- SolidWorks (493 KB)
- STEP (99 KB)
- PLB16F7000 - Cable connector for use with female removable contacts.
- IGES (88 KB)
- SolidWorks (137 KB)
- STEP (34 KB)
- PLB16F7050 - Cable connector for use with female removable contacts, terminating side of insulator has c’bore for large wire sizes, top opening hood.
- IGES (806 KB)
- PLB16F8000/AA - Panel mount for use with female removable contacts terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (109 KB)
- IGES (91 KB)
- SolidWorks (357 KB)
- STEP (54 KB)
- PLB16F80110 - Panel mount for use with female removable contacts, blind mating system.
- Drawing (117 KB)
- PLB16F80120/AA - Panel mount for use with female removable contacts, blind mating system, RoHS compliant.
- Drawing (123 KB)
- PLB16M0000 - Cable connector for use with male removable contacts
- Drawing (80 KB)
- PLB16M0000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (89 KB)
- IGES (85 KB)
- SolidWorks (128 KB)
- STEP (32 KB)
- PLB16M0050 - Cable connector for use with male removable contacts, top opening hood.
- Drawing (102 KB)
- IGES (803 KB)
- SolidWorks (2.2 MB)
- STEP (677 KB)
- PLB16M1000 - Panel mount connector for use with male removable contacts
- Drawing (101 KB)
- PLB16M1000/AA - Panel mount connector for use with male removable contacts, RoHS compliant.
- Drawing (109 KB)
- IGES (86 KB)
- SolidWorks (343 KB)
- STEP (53 KB)
- PLB16M10120 - Panel mount connector for use with male removable contacts, blind mating system.
- Drawing (137 KB)
- PLB16M10140 - Panel mount connector for use with male removable contacts, blind mating system.
- IGES (168 KB)
- SolidWorks (639 KB)
- STEP (106 KB)
- PLB16M10820 - Panel mount connector for use with male removable contacts, panel float mount
- Drawing (52 KB)
- PLB16M10830 - Panel mount connector for use with male removable contacts, panel float mount
- IGES (139 KB)
- SolidWorks (372 KB)
- STEP (84 KB)
- PLB16M200C1 - Fixed solder cup termination male connector, gold over nickel on mating end and
termination end.
- Drawing (117 KB)
- PLB16M7000/AA - Cable connector supplied with erminating side of insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (90 KB)
- IGES (85 KB)
- SolidWorks (128 KB)
- STEP (32 KB)
- PLB16M8000/AA - Panel mount connector for use with male removable contacts Terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (111 KB)
- PLB16M80820 - Panel mount connector for use with male removable contacts, terminating side of insulator has c’bore for large wire sizes, fixed panel mount hardware.
- IGES (139 KB)
- SolidWorks (691 KB)
- STEP (87 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLB16F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (426 KB)
- PLB16F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (882 KB)
- PLB16M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (423 KB)
- PLB16M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (329 KB)
PCB mount, contacts: standard material, right angle solder
- PLB16F400A2 - ght angle (90°) PCB mount female connector, Gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (266 KB)
- SolidWorks (305 KB)
- STEP (163 KB)
- PLB16F4B0A1 - Right angle (90°) PCB mount female connector, plastic mounting bracket.
- Drawing (140 KB)
- IGES (294 KB)
- SolidWorks (387 KB)
- STEP (183 KB)
- PLB16F4B30A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, RoHS compliant.
- IGES (348 KB)
- SolidWorks (524 KB)
- STEP (213 KB)
- PLB16F4B30A2 - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (343 KB)
- SolidWorks (437 KB)
- STEP (202 KB)
- PLB16F4B3N0A2 - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (498 KB)
- SolidWorks (770 KB)
- STEP (312 KB)
- PLB16F4BN0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, RoHS compliant.
- Drawing (147 KB)
- PLB16M400A1/AA - Right angle (90°) PCB mount male connector, RoHS compliant
- Drawing (134 KB)
- PLB16M4200A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146]
- Drawing (130 KB)
- PLB16M42BN0A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146], mounting bracket, push-on fastener.
- Drawing (135 KB)
- PLB16M4B0A1 - Right angle (90°) PCB mount male connector, plastic bracket.
- Drawing (133 KB)
- PLB16M4BN0A1 - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener.
- Drawing (138 KB)
- IGES (315 KB)
- SolidWorks (412 KB)
- STEP (206 KB)
- PLB16F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (133 KB)
- IGES (498 KB)
- SolidWorks (839 KB)
- STEP (319 KB)
- PLB16M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (137 KB)
- IGES (474 KB)
- SolidWorks (652 KB)
- STEP (298 KB)
PCB mount, contacts: standard material, straight press-fit
- PLB16M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (407 KB)
- PLB16M93ST30A1/AA - Straight compliant press-fit termination PCB mount male connector, self-tapping steel screws for 3.18 [0.125] thick board, RoHS compliant.
- Drawing (423 KB)
- IGES (375 KB)
- SolidWorks (788 KB)
- STEP (225 KB)
- PLB16F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (328 KB)
- PLB16M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (325 KB)
PCB mount, contacts: standard material, straight solder
- PLB16F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (132 KB)
- IGES (230 KB)
- SolidWorks (223 KB)
- STEP (139 KB)
- PLB16F3200A1/AA - Straight solder PCB mount female connector with 9.58 [0.377] tail extension, RoHS compliant.
- Drawing (132 KB)
- PLB16F3N0A1 - Straight solder PCB mount female connector, push-on fastener.
- Drawing (118 KB)
- IGES (278 KB)
- SolidWorks (418 KB)
- STEP (165 KB)
- PLB16F3N0A2/AA - Straight solder PCB mount female connector, push-on fastener, Gold flash over nickel on mating end and tin-lead solder coat on termination end, RoHS compliant.
- Drawing (141 KB)
- PLB16F3N0C1/AA - Straight solder PCB mount female connector, push-on fastener, 0.000030 inch [0.75μ]gold over nickel on contacts, RoHS compliant.
- Drawing (135 KB)
- PLB16F3ST20A1 - Straight solder PCB mount female connector, self-tapping steel screws for 2.36 [0.093] thick board
- Drawing (135 KB)
- PLB16M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- PLB16M300A2 - Straight solder PCB mount male connector, gold flash over nickel on mating end and tin-lead solder coated termination end.
- PLB16M300C1 - Straight solder PCB mount male connector, 0.000030 inch [0.75μ] gold over nickel.
- Drawing (112 KB)
- PLB16M300C2 - Straight solder PCB mount male connector, gold over nickel on mating end and
tin-lead solder coated termination end.
- IGES (208 KB)
- SolidWorks (285 KB)
- STEP (128 KB)
- PLB16M3200A1 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension
- Drawing (119 KB)
- IGES (208 KB)
- SolidWorks (280 KB)
- STEP (128 KB)
- PLB16M3200C1 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension, 0.000030 inch [0.75μ] gold over nickel on mating end and
termination end.
- Drawing (120 KB)
- PLB16M3N0A1 - Straight solder PCB mount male connector, push-on fastener.
- Drawing (117 KB)
- PLB16M3N0A2 - Straight solder PCB mount male connector, push-on fastener, Gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (241 KB)
- SolidWorks (286 KB)
- STEP (155 KB)
- PLB16M3ST20A1 - Straight solder PCB mount male connector, self-tapping screws.
- IGES (278 KB)
- SolidWorks (387 KB)
- STEP (184 KB)
- PLB16M3ST30A2 - Straight solder PCB mount male connector, self-tapping screws, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (208 KB)
- SolidWorks (302 KB)
- STEP (130 KB)
- PLB16F3N0A1 - Straight solder PCB mount female connector
- Drawing (117 KB)
- PLB16M3N0A1 - Straight solder PCB mount male connector
- Drawing (116 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLBH16F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (427 KB)
- PLBH16F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (983 KB)
- PLBH16M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (423 KB)
- PLBH16M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (428 KB)
PCB mount, high conductivity contacts, right angle solder
- PLBH16F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (134 KB)
- PLBH16F4BN0A1 - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener.
- Drawing (136 KB)
- PLBH16M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (133 KB)
- PLBH16M4B3N0C1/AA - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (147 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLBH16F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (426 KB)
- PLBH16M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (408 KB)
- PLBH16M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (417 KB)
PCB mount, high conductivity contacts, straight solder
- PLBH16F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (136 KB)
- IGES (394 KB)
- SolidWorks (447 KB)
- PLBH16F3200A1 - Straight solder PCB mount female connector with 9.58 [0.377] tail length.
- Drawing (126 KB)
- PLBH16F3N0A1 - Straight solder PCB mount female connector
- Drawing (117 KB)
- PLBH16F3N0A1/AA - Straight solder PCB mount female connector, push-on fastener, RoHS compliant.
- Drawing (137 KB)
- IGES (280 KB)
- SolidWorks (302 KB)
- STEP (175 KB)
- PLBH16M300A1 - Straight solder PCB mount male connector
- Drawing (123 KB)
- PLBH16M3200A1/AA - Straight solder PCB mount male connector with 9.58 [0.377] tail extension, RoHS compliant.
- Drawing (127 KB)
- PLBH16M3N0A1 - Straight solder PCB mount male connector
- Drawing (116 KB)
- PLBH16M3N0A1/AA - Straight solder PCB mount male connector, push-on fastener, RoHS compliant.
- Drawing (131 KB)
- IGES (241 KB)
- SolidWorks (295 KB)
- STEP (153 KB)
- PLBH16M3ST30C1 - Straight solder PCB mount male connector, self-tapping screws, 0.000030 inch [0.75μ]gold over nickel on mating end and termination end.
- IGES (208 KB)
- SolidWorks (322 KB)
- STEP (129 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (285 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
