Triple row, 12 contacts rated to 32 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLC1200050 - Cable connector hood with strain relief
- Drawing (74 KB)
- PLC12F0000 - Cable connector for use with female removable contacts
- Drawing (78 KB)
- IGES (71 KB)
- SolidWorks (201 KB)
- STEP (30 KB)
- PLC12F1000 - Panel mount connector for use with female removable contacts
- Drawing (99 KB)
- PLC12F1000/AA - Panel mount connector for use with female removable contacts, RoHS compliant.
- Drawing (108 KB)
- IGES (73 KB)
- SolidWorks (241 KB)
- STEP (45 KB)
- PLC12F1060 - Panel mount connector for use with female removable contacts, quick release panel mount hardware.
- Drawing (108 KB)
- PLC12M0000 - Cable connector for use with male removable contacts
- Drawing (77 KB)
- PLC12M1000 - Panel mount connector for use with male removable contacts
- Drawing (95 KB)
- PLC12M1000/AA - Panel mount connector for use with male removable contacts, RoHS compliant.
- Drawing (108 KB)
- IGES (73 KB)
- SolidWorks (167 KB)
- STEP (45 KB)
- PLC12M10830 - Panel mount connector for use with male removable contacts, panel float mount
- IGES (122 KB)
- SolidWorks (392 KB)
- STEP (79 KB)
- PLC12M206A1 - Fixed solder cup termination male connector, quick release panel mount.
- Drawing (119 KB)
- PLC12M7000/AA - Cable connector supplied with erminating side of insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (87 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLC12F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (423 KB)
- PLC12F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (430 KB)
- PLC12M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (421 KB)
- PLC12M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (327 KB)
PCB mount, contacts: standard material, right angle solder
- PLC12F400A1 - Right angle (90°) PCB mount female connector
- Drawing (107 KB)
- PLC12F4B0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, RoHS compliant.
- Drawing (142 KB)
- IGES (224 KB)
- SolidWorks (309 KB)
- STEP (148 KB)
- PLC12F4B3N0C2 - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and
0.00020 inch [5.00μ] tin-lead solder coated termination end.
- Drawing (142 KB)
- PLC12F4BN0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, RoHS compliant.
- Drawing (146 KB)
- PLC12M400A1 - Right angle (90°) PCB mount male connector
- Drawing (62 KB)
- PLC12M4B0A1/AA - Right angle (90°) PCB mount male connector, plastic bracket, RoHS compliant.
- Drawing (138 KB)
- IGES (204 KB)
- SolidWorks (276 KB)
- STEP (128 KB)
- PLC12M4B0A2 - Right angle (90°) PCB mount male connector, bracket, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (133 KB)
- PLC12M4BN0A1 - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener.
- Drawing (138 KB)
- IGES (249 KB)
- SolidWorks (388 KB)
- STEP (163 KB)
- PLC12F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (132 KB)
- PLC12M4B3N0A1 - Right angle (90°) PCB mount male connector
PCB mount, contacts: standard material, straight press-fit
- PLC12F9200A1/AA - Straight press-fit Bi-Spring type compliant termination length 4.65 [0.183] for 2.36 [0.093] thick board. PCB mount female connector, RoHS compliant.
- Drawing (413 KB)
- PLC12F92ST30A1 - Straight press-fit Bi-Spring type compliant termination length 4.65 [0.183] for 2.36 [0.093] thick board. PCB mount female connector, self-tapping steel screws 2-28 x 7.92 [0.312] length for 3.18 [0.125] thick board.
- IGES (450 KB)
- SolidWorks (5.5 MB)
- STEP (252 KB)
- PLC12M92ST30A1 - Straight PCB mount press-fit, length 4.65 [0.183] for 2.36 [0.093] thick board, self-tapping screws 2-28 x 7.92 [0.312] length for 3.18 [0.125] thick board.
- IGES (441 KB)
- SolidWorks (3.6 MB)
- STEP (250 KB)
- PLC12M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (407 KB)
- PLC12F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (423 KB)
- PLC12M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (422 KB)
PCB mount, contacts: standard material, straight solder
- PLC12F300A1 - Straight solder PCB mount female connector
- Drawing (127 KB)
- PLC12F3200A1/AA - Straight solder PCB mount female connector with 9.58 [0.377] tail extension, RoHS compliant.
- Drawing (124 KB)
- PLC12M300A1 - Straight solder PCB mount male connector
- Drawing (91 KB)
- PLC12M300C1 - Straight solder PCB mount male connector, 0.000030 inch [0.75μ] gold over nickel.
- Drawing (119 KB)
- PLC12M3200A1/AA - Straight solder PCB mount male connector with 9.58 [0.377] tail extension, RoHS compliant.
- Drawing (116 KB)
- PLC12M32N0C2 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension, 0.000030 inch [0.75μ] gold over nickel on mating end and
0.00020 inch [5.00μ] tin-lead solder coated termination end.
- Drawing (122 KB)
- PLC12F3N0A1 - Straight solder PCB mount female connector
- Drawing (114 KB)
- PLC12M3N0A1 - Straight solder PCB mount male connector
- Drawing (115 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLCH12F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (423 KB)
- PLCH12F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (426 KB)
- PLCH12M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (421 KB)
- PLCH12M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (425 KB)
PCB mount, high conductivity contacts, right angle solder
- PLCH12F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (133 KB)
- PLCH12M42B0A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146]
- Drawing (133 KB)
- PLCH12M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (131 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLCH12F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (424 KB)
- PLCH12M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (419 KB)
PCB mount, high conductivity contacts, straight solder
- PLCH12F300A1 - Straight solder PCB mount female connector
- IGES (159 KB)
- SolidWorks (548 KB)
- STEP (105 KB)
- PLCH12F3N0A1 - Straight solder PCB mount female connector
- Drawing (115 KB)
- PLCH12M3N0A1 - Straight solder PCB mount male connector
- Drawing (116 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (249 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
