Triple row, 18 contacts rated to 28 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLC1800050 - Cable connector hood with strain relief
- Drawing (86 KB)
- PLC18F0000 - Cable connector for use with female removable contacts
- Drawing (70 KB)
- PLC18F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (90 KB)
- IGES (95 KB)
- SolidWorks (315 KB)
- STEP (36 KB)
- PLC18F0050/AA - Cable connector for use with female removable contacts, top opening hood, RoHS compliant
- Drawing (108 KB)
- PLC18F1000 - Panel mount connector for use with female removable contacts
- Drawing (101 KB)
- PLC18F1000/AA - Panel mount connector for use with female removable contacts, RoHS compliant.
- Drawing (109 KB)
- PLC18F10110 - Panel mount connector for use with female removable contacts, blind mating system.
- Drawing (138 KB)
- PLC18F10130 - Panel mount connector for use with female removable contacts, blind mating system.
- Drawing (148 KB)
- PLC18F1060/AA - Panel mount connector for use with female removable contacts, quick release panel mount hardware, RoHS compliant.
- Drawing (114 KB)
- PLC18F200A1 - Fixed solder cup termination female connector
- Drawing (110 KB)
- PLC18F7000/AA - Cable connector for use with female removable contacts, terminating side of insulator
has c’bore for large wire sizes, RoHS compliant.
- Drawing (89 KB)
- PLC18F80820/AA - Panel mount for use with female removable contacts, fixed panel mount.
- Drawing (147 KB)
- PLC18M0000 - Cable connector for use with male removable contacts
- Drawing (78 KB)
- PLC18M0000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (90 KB)
- PLC18M0050 - Cable connector for use with male removable contacts, top opening hood.
- Drawing (102 KB)
- PLC18M1000 - Panel mount connector for use with male removable contacts
- Drawing (101 KB)
- IGES (94 KB)
- SolidWorks (138 KB)
- STEP (34 KB)
- PLC18M1060/AA - Panel mount connector for use with male removable contacts, quick release panel mount hardware, RoHS compliant.
- Drawing (110 KB)
- IGES (152 KB)
- SolidWorks (221 KB)
- STEP (75 KB)
- PLC18M7050/AA - Cable connector for use with male contacts, terminating side of insulator Ø c’bore for large wire sizes, top opening hood, RoHS compliant
- IGES (179 KB)
- PLC18M8000 - Panel mount connector for use with male removable contacts Terminating side of insulator has c’bore for large wire sizes.
- Drawing (87 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLC18F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (431 KB)
- PLC18F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (330 KB)
- PLC18M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (429 KB)
- PLC18M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (329 KB)
PCB mount, contacts: standard material, right angle solder
- PLC18F4B3N0C2/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and
0.00020 inch [5.00μ] tin-lead solder coated termination end.
- Drawing (150 KB)
- PLC18F4BN0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, RoHS compliant.
- Drawing (145 KB)
- PLC18F4BN0C2/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and tin-lead solder coated termination end, RoHS compliant.
- Drawing (156 KB)
- PLC18M42B0A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146]
- Drawing (140 KB)
- PLC18M4B0A1/AA - Right angle (90°) PCB mount male connector, plastic bracket, RoHS compliant.
- Drawing (140 KB)
- PLC18M4B0C2/AA - Right angle (90°) PCB mount male connector, bracket, gold over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (144 KB)
- PLC18M4B3N0A1/AA - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, RoHS compliant.
- Drawing (147 KB)
- PLC18M4B3N0C2 - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and termination end solder coated.
- Drawing (144 KB)
- PLC18M4BN0A2/AA - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (160 KB)
- PLC18M4BN0C1/AA - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, RoHS compliant.
- Drawing (155 KB)
- PLC18F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (138 KB)
- PLC18M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (135 KB)
PCB mount, contacts: standard material, straight press-fit
- PLC18F9300A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (415 KB)
- PLC18M92ST20A1 - Straight PCB mount press-fit, length 4.65 [0.183] for 2.36 [0.093] thick board, self-tapping screws.
- IGES (596 KB)
- SolidWorks (664 KB)
- STEP (349 KB)
- PLC18M92ST20C1 - Straight PCB mount press-fit, length 4.65 [0.183] for 2.36 [0.093] thick board, self-tapping screws.
- IGES (597 KB)
- SolidWorks (667 KB)
- STEP (370 KB)
- PLC18M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (412 KB)
- PLC18F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (328 KB)
- IGES (474 KB)
- SolidWorks (3 MB)
- STEP (238 KB)
- PLC18M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (326 KB)
PCB mount, contacts: standard material, straight solder
- PLC18F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (133 KB)
- IGES (238 KB)
- SolidWorks (3.3 MB)
- STEP (148 KB)
- PLC18F300C2 - Straight solder PCB mount female connector, gold over nickel on mating end and
tin-lead solder coated termination end.
- Drawing (137 KB)
- PLC18F32N0A2 - Straight solder PCB mount female connector with 9.58 [0.377] tail length.
- Drawing (159 KB)
- PLC18F3N0A2/AA - Straight solder PCB mount female connector, push-on fastener, Gold flash over nickel on mating end and tin-lead solder coat on termination end, RoHS compliant.
- Drawing (135 KB)
- PLC18M300A1 - Straight solder PCB mount male connector
- IGES (230 KB)
- SolidWorks (982 KB)
- STEP (150 KB)
- PLC18M300C2 - Straight solder PCB mount male connector, gold over nickel on mating end and
tin-lead solder coated termination end.
- Drawing (106 KB)
- PLC18M3200A1 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension
- Drawing (114 KB)
- PLC18M3N0C2 - Straight solder PCB mount male connector, push-on fastener, gold over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (132 KB)
- PLC18F3N0A1 - Straight solder PCB mount female connector
- Drawing (121 KB)
- PLC18M3N0A1 - Straight solder PCB mount male connector
- Drawing (118 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLCH18F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (431 KB)
- PLCH18F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (435 KB)
- PLCH18M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (430 KB)
- PLCH18M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (431 KB)
PCB mount, high conductivity contacts, right angle solder
- PLCH18F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (139 KB)
- PLCH18M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (136 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLCH18F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (428 KB)
- PLCH18M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (419 KB)
PCB mount, high conductivity contacts, straight solder
- PLCH18F3N0A1 - Straight solder PCB mount female connector
- Drawing (122 KB)
- PLCH18F3N0A1/AA - Straight solder PCB mount female connector, push-on fastener, RoHS compliant.
- Drawing (136 KB)
- IGES (290 KB)
- SolidWorks (299 KB)
- STEP (182 KB)
- PLCH18M3N0A1 - Straight solder PCB mount male connector
- Drawing (119 KB)
- PLCH18M3N0A1/AA - Straight solder PCB mount male connector, push-on fastener, RoHS compliant.
- Drawing (133 KB)
- IGES (246 KB)
- SolidWorks (286 KB)
- STEP (155 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (285 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
