Triple row, 24 contacts rated to 28 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removable contacts, female solder
Removable contacts, male solder
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLC2400050 - Cable connector hood with strain relief
- Drawing (80 KB)
- PLC24F0000 - Cable connector for use with female removable contacts
- Drawing (92 KB)
- PLC24F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (91 KB)
- IGES (76 KB)
- SolidWorks (154 KB)
- STEP (29 KB)
- PLC24F0050 - Cable connector for use with female removable contacts, top opening hood.
- Drawing (110 KB)
- IGES (480 KB)
- SolidWorks (2.1 MB)
- STEP (310 KB)
- PLC24F1000 - Panel mount connector for use with female removable contacts
- Drawing (102 KB)
- PLC24F1000/AA - Panel mount connector for use with female removable contacts, RoHS compliant.
- Drawing (112 KB)
- IGES (122 KB)
- SolidWorks (938 KB)
- STEP (69 KB)
- PLC24F10110 - Panel mount connector for use with female removable contacts, blind mating system.
- Drawing (137 KB)
- PLC24F10120/AA - Panel mount connector for use with female removable contacts, blind mating system, RoHS compliant.
- Drawing (129 KB)
- IGES (191 KB)
- SolidWorks (841 KB)
- STEP (119 KB)
- PLC24F1060/AA - Panel mount connector for use with female removable contacts, quick release panel mount hardware, RoHS compliant.
- Drawing (118 KB)
- PLC24F7000/AA - Cable connector for use with female removable contacts, terminating side of insulator
has c’bore for large wire sizes, RoHS compliant.
- Drawing (92 KB)
- PLC24F7050 - Cable connector for use with female removable contacts, terminating side of insulator has c’bore for large wire sizes, top opening hood.
- Drawing (103 KB)
- PLC24M0000 - Cable connector for use with male removable contacts
- Drawing (93 KB)
- PLC24M0000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (92 KB)
- IGES (115 KB)
- SolidWorks (162 KB)
- STEP (44 KB)
- PLC24M0050 - Cable connector for use with male removable contacts, top opening hood.
- Drawing (108 KB)
- IGES (823 KB)
- SolidWorks (1.5 MB)
- STEP (692 KB)
- PLC24M1000 - Panel mount connector for use with male removable contacts
- Drawing (106 KB)
- PLC24M1000/AA - Panel mount connector for use with male removable contacts, RoHS compliant.
- Drawing (112 KB)
- IGES (115 KB)
- SolidWorks (421 KB)
- STEP (67 KB)
- PLC24M10110 - Panel mount connector for use with male removable contacts, blind mating system.
- Drawing (141 KB)
- PLC24M10810 - Panel mount connector for use with male removable contacts, panel float mount
- Drawing (108 KB)
- IGES (170 KB)
- SolidWorks (405 KB)
- STEP (107 KB)
- PLC24M7050/AA - Cable connector for use with male contacts, terminating side of insulator Ø c’bore for large wire sizes, top opening hood, RoHS compliant
- Drawing (110 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLC24F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (163 KB)
- PLC24F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (58 KB)
- PLC24M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (157 KB)
- PLC24M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (56 KB)
PCB mount, contacts: standard material, right angle solder
- PLC24F400A1 - Right angle (90°) PCB mount female connector
- Drawing (135 KB)
- PLC24F42BN0A1/AA - Right angle (90°) PCB mount female connector with 9.58 [0.377] tail extension, mounting bracket.
- Drawing (154 KB)
- PLC24F4B0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, RoHS compliant.
- Drawing (150 KB)
- IGES (441 KB)
- SolidWorks (455 KB)
- STEP (252 KB)
- PLC24F4BN0A1 - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener.
- Drawing (152 KB)
- PLC24F4BN0C2/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and tin-lead solder coated termination end, RoHS compliant.
- Drawing (151 KB)
- PLC24M400A1 - Right angle (90°) PCB mount male connector
- Drawing (64 KB)
- IGES (349 KB)
- SolidWorks (436 KB)
- STEP (219 KB)
- PLC24M42BN0A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146], mounting bracket, push-on fastener.
- IGES (420 KB)
- PLC24M4B0A1/AA - Right angle (90°) PCB mount male connector, plastic bracket, RoHS compliant.
- Drawing (150 KB)
- PLC24M4B0C2 - Right angle (90°) PCB mount male connector, bracket, gold over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (150 KB)
- PLC24M4B3N0A1/AA - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, RoHS compliant.
- Drawing (155 KB)
- PLC24M4BN0A1/AA - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, RoHS compliant.
- Drawing (152 KB)
- PLC24M4BN0A2/AA - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (161 KB)
- PLC24M4BN0C1/AA - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (154 KB)
- PLC24M4BN0C2/AA - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, 0.000030 inch [0.75μ] gold over nickel on mating end and
0.00020 inch [5.00μ] tin-lead solder coated termination end, RoHS compliant.
- Drawing (165 KB)
- IGES (427 KB)
- SolidWorks (428 KB)
- STEP (265 KB)
- PLC24F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (147 KB)
- PLC24M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (144 KB)
PCB mount, contacts: standard material, straight press-fit
- PLC24F9200A1 - Straight press-fit Bi-Spring type compliant termination length 4.65 [0.183] for 2.36 [0.093] thick board. PCB mount female connector.
- IGES (760 KB)
- SolidWorks (1 MB)
- STEP (390 KB)
- PLC24F9300A1/AA - Straight compliant press-fit termination PCB mount female connector, RoHS compliant.
- Drawing (149 KB)
- PLC24F9300C1 - Straight compliant press-fit termination PCB mount female connector, 0.75 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (52 KB)
- PLC24F93ST30A1/AA - Straight compliant press-fit termination PCB mount female connector, self-tapping steel screws for 3.18 [0.125] thick board
- Drawing (160 KB)
- PLC24M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (131 KB)
- PLC24M93ST20C1/AA - Straight compliant press-fit termination PCB mount male connector, self-tapping steel screws for 2.36 [0.093] thick board
- Drawing (152 KB)
- PLC24F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (54 KB)
- PLC24M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (52 KB)
- IGES (671 KB)
- SolidWorks (4.4 MB)
- STEP (413 KB)
PCB mount, contacts: standard material, straight solder
- PLC24F300A1 - Straight solder PCB mount female connector
- PLC24F300C1 - Straight solder PCB mount female connector, 0.000030 inch [0.75μ] gold over nickel on mating end and
termination end.
- Drawing (129 KB)
- PLC24F3200A1/AA - Straight solder PCB mount female connector with 9.58 [0.377] tail length.
- Drawing (128 KB)
- PLC24F3200C2/AA - Straight solder PCB mount female connector with 9.58 [0.377] tail extension, 0.000030 inch [0.75μ] gold over nickel on mating end and
0.00020 inch [5.00μ] tin-lead solder coated termination end, RoHS compliant.
- Drawing (137 KB)
- IGES (332 KB)
- SolidWorks (467 KB)
- STEP (198 KB)
- PLC24F3N0A2/AA - Straight solder PCB mount female connector, push-on fastener, Gold flash over nickel on mating end and tin-lead solder coat on termination end, RoHS compliant.
- Drawing (146 KB)
- IGES (366 KB)
- SolidWorks (759 KB)
- STEP (219 KB)
- PLC24M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- Drawing (132 KB)
- IGES (291 KB)
- SolidWorks (323 KB)
- STEP (166 KB)
- PLC24M300C2/AA - Straight solder PCB mount male connector, gold over nickel on mating end and
tin-lead solder coated termination end.
- Drawing (141 KB)
- PLC24F3N0A1 - Straight solder PCB mount female connector
- Drawing (128 KB)
- PLC24M3N0A1 - Straight solder PCB mount male connector
- Drawing (125 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLCH24F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (164 KB)
- PLCH24F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (167 KB)
- PLCH24M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (158 KB)
- PLCH24M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (164 KB)
PCB mount, high conductivity contacts, right angle solder
- PLCH24F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (147 KB)
- PLCH24M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (145 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLCH24F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- PLCH24F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (153 KB)
- PLCH24M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- IGES (297 KB)
- SolidWorks (718 KB)
- STEP (181 KB)
- PLCH24M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (146 KB)
PCB mount, high conductivity contacts, straight solder
- PLCH24F3N0A1 - Straight solder PCB mount female connector
- Drawing (128 KB)
- PLCH24M3N0A1 - Straight solder PCB mount male connector
- Drawing (125 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removable contacts, female solder
- FS112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (81 KB)
Removable contacts, male solder
- MS112NS - High conductivity size 16 for use with 12 AWG.
- Drawing (82 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.0 - Size 16 contact for use with 12 AWG, sequential mate 6.35 [.250] length.
- Drawing (103 KB)
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
