Triple row, 30 contacts rated to 24 amp
Cable/Panel Mount Connectors
PCB mount, contacts: standard material, right angle press-fit
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle press-fit
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removable contacts, female solder
Removable contacts, male solder
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PLC3000050 - Cable connector hood with strain relief
- Drawing (91 KB)
- PLC30F0000 - Cable connector for use with female removable contacts
- Drawing (90 KB)
- PLC30F0000/AA - Cable connector for use with female removable contacts, RoHS compliant
- Drawing (95 KB)
- IGES (135 KB)
- SolidWorks (231 KB)
- STEP (49 KB)
- PLC30F0050 - Cable connector for use with female removable contacts, top opening hood.
- IGES (798 KB)
- SolidWorks (1.1 MB)
- STEP (570 KB)
- PLC30F1000 - Panel mount connector for use with female removable contacts
- Drawing (107 KB)
- PLC30F10130 - Panel mount connector for use with female removable contacts, blind mating system.
- IGES (215 KB)
- SolidWorks (335 KB)
- STEP (130 KB)
- PLC30F1060 - Panel mount connector for use with female removable contacts, quick release panel mount hardware.
- IGES (208 KB)
- SolidWorks (310 KB)
- STEP (120 KB)
- PLC30F10830 - Panel mount connector for use with female removable contacts, panel float mount.
- IGES (201 KB)
- SolidWorks (251 KB)
- STEP (118 KB)
- PLC30F7000/AA - Cable connector for use with female removable contacts, terminating side of insulator
has c’bore for large wire sizes, RoHS compliant.
- Drawing (95 KB)
- PLC30F7050 - Cable connector for use with female removable contacts, terminating side of insulator has c’bore for large wire sizes, top opening hood.
- Drawing (48 KB)
- PLC30F8000 - Panel mount for use with female removable contacts
- IGES (120 KB)
- SolidWorks (174 KB)
- STEP (82 KB)
- PLC30F80120/AA - Panel mount for use with female removable contacts, blind mating system, RoHS compliant.
- Drawing (117 KB)
- PLC30M0000 - Cable connector for use with male removable contacts
- Drawing (86 KB)
- PLC30M0000/AA - Cable connector for use with male removable contacts, RoHS compliant.
- Drawing (95 KB)
- IGES (138 KB)
- SolidWorks (158 KB)
- STEP (47 KB)
- PLC30M0050 - Cable connector for use with male removable contacts, top opening hood.
- Drawing (114 KB)
- IGES (802 KB)
- SolidWorks (1.1 MB)
- STEP (577 KB)
- PLC30M1000 - Panel mount connector for use with male removable contacts
- Drawing (105 KB)
- PLC30M1000/AA - Panel mount connector for use with male removable contacts, RoHS compliant.
- Drawing (116 KB)
- PLC30M7000 - Cable connector supplied with erminating side of insulator
has c’bore for large wire sizes.
- Drawing (92 KB)
- IGES (139 KB)
- SolidWorks (512 KB)
- STEP (48 KB)
- PLC30M8000/AA - Panel mount connector for use with male removable contacts Terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (117 KB)
PCB mount, contacts: standard material, right angle press-fit
- PLC30F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (171 KB)
- PLC30F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (62 KB)
- PLC30M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (165 KB)
- IGES (987 KB)
- SolidWorks (5.7 MB)
- STEP (573 KB)
- PLC30M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (171 KB)
PCB mount, contacts: standard material, right angle solder
- PLC30F400A1 - Right angle (90°) PCB mount female connector
- Drawing (125 KB)
- PLC30F4B0A1/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket, RoHS compliant.
- Drawing (161 KB)
- IGES (490 KB)
- SolidWorks (518 KB)
- STEP (288 KB)
- PLC30F4BN0A2 - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, gold flash over nickel on mating end and tin-lead solder coated termination end.
- IGES (533 KB)
- PLC30M400A1 - Right angle (90°) PCB mount male connector
- IGES (376 KB)
- SolidWorks (448 KB)
- STEP (240 KB)
- PLC30M4200A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146]
- Drawing (133 KB)
- PLC30M42B0A1 - Right angle (90°) PCB mount male connector with termination length 3.71 [0.146]
- Drawing (143 KB)
- PLC30M4B0A1 - Right angle (90°) PCB mount male connector, plastic bracket.
- Drawing (148 KB)
- PLC30M4B0C2 - Right angle (90°) PCB mount male connector, bracket, gold over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (145 KB)
- PLC30M4B3N0A2/AA - Right angle (90°) PCB mount male connector, metal bracket with crossbar, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (168 KB)
- PLC30M4BN0A1 - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener.
- Drawing (150 KB)
- PLC30M4BN0A2 - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (148 KB)
- PLC30F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (156 KB)
- PLC30M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (147 KB)
PCB mount, contacts: standard material, straight press-fit
- PLC30F9300A1/AA - Straight compliant press-fit termination PCB mount female connector, RoHS compliant.
- Drawing (150 KB)
- PLC30F93ST30C1 - Straight compliant press-fit termination PCB mount female connector, self-tapping steel screws for 3.18 [0.125] thick board
- Drawing (164 KB)
- PLC30M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (138 KB)
- PLC30M9300C1 - Straight compliant press-fit termination PCB mount male connector, 0.75 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (142 KB)
- PLC30F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (56 KB)
- IGES (740 KB)
- SolidWorks (880 KB)
- STEP (502 KB)
- PLC30M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (152 KB)
PCB mount, contacts: standard material, straight solder
- PLC30F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (141 KB)
- PLC30F300A2 - Straight solder PCB mount female connector, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- Drawing (139 KB)
- PLC30F300C1 - Straight solder PCB mount female connector, 0.000030 inch [0.75μ] gold over nickel on mating end and
termination end.
- Drawing (139 KB)
- PLC30F3200A1/AA - Straight solder PCB mount female connector with 9.58 [0.377] tail extension, RoHS compliant.
- Drawing (142 KB)
- PLC30F3200A2 - Straight solder PCB mount female connector with 9.58 [0.377] tail length.
- Drawing (143 KB)
- PLC30F3N0A1/AA - Straight solder PCB mount female connector, push-on fastener, RoHS compliant.
- Drawing (142 KB)
- PLC30M300A1 - Straight solder PCB mount male connector
- Drawing (127 KB)
- PLC30M300C1 - Straight solder PCB mount male connector, 0.000030 inch [0.75μ] gold over nickel.
- Drawing (132 KB)
- PLC30M3200A1 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension
- Drawing (119 KB)
- IGES (293 KB)
- SolidWorks (249 KB)
- STEP (187 KB)
- PLC30M3200C1 - Straight solder PCB mount male connector with 9.58 [0.377] tail extension, 0.000030 inch [0.75μ] gold over nickel on mating end and
termination end.
- Drawing (128 KB)
- PLC30F3N0A1 - Straight solder PCB mount female connector
- Drawing (133 KB)
- PLC30M3N0A1 - Straight solder PCB mount male connector
- Drawing (127 KB)
PCB mount, high conductivity contacts, right angle press-fit
- PLCH30F62B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 4.65 [0.183]
- Drawing (170 KB)
- PLCH30F63B30A1 - Right angle (90°) press-fit termination PCB mount female connector. Termination length 5.56 [0.219]
- Drawing (173 KB)
- PLCH30M62B30A1 - Right angle (90°) compliant press-fit termination PCB mount male connector. Termination length 4.65 [0.183]
- Drawing (166 KB)
- PLCH30M63B30A1 - Right angle (90°) press-fit termination PCB mount male connector. Termination length 5.56 [0.219]
- Drawing (169 KB)
PCB mount, high conductivity contacts, right angle solder
- PLCH30F400A2 - ght angle (90°) PCB mount female connector, Gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (450 KB)
- SolidWorks (520 KB)
- STEP (269 KB)
- PLCH30F4B0A1 - Right angle (90°) PCB mount female connector, plastic mounting bracket.
- IGES (490 KB)
- SolidWorks (499 KB)
- STEP (311 KB)
- PLCH30F4B30A2 - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (533 KB)
- SolidWorks (734 KB)
- STEP (324 KB)
- PLCH30F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (154 KB)
- PLCH30F4B3N0A2 - Right angle (90°) PCB mount female connector, plastic mounting bracket with cross bar, push-on fastener, gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (695 KB)
- SolidWorks (782 KB)
- STEP (449 KB)
- PLCH30F4BN0A2 - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener, gold flash over nickel on mating end and tin-lead solder coated termination end.
- IGES (541 KB)
- SolidWorks (580 KB)
- STEP (336 KB)
- PLCH30M4B30A1 - Right angle (90°) PCB mount male connector, metal bracket with crossbar.
- IGES (495 KB)
- SolidWorks (540 KB)
- STEP (302 KB)
- PLCH30M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (149 KB)
- IGES (607 KB)
- SolidWorks (823 KB)
- STEP (397 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLCH30F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (162 KB)
- PLCH30M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (154 KB)
PCB mount, high conductivity contacts, straight solder
- PLCH30F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (143 KB)
- SolidWorks (465 KB)
- PLCH30F300C1 - Straight solder PCB mount female connector, 0.000030 inch [0.75μ] gold over nickel on mating end and
termination end.
- PLCH30F3200A1/AA - Straight solder PCB mount female connector with 9.58 [0.377] tail extension, RoHS compliant.
- Drawing (147 KB)
- IGES (384 KB)
- SolidWorks (397 KB)
- STEP (241 KB)
- PLCH30F3N0A1 - Straight solder PCB mount female connector
- Drawing (133 KB)
- IGES (418 KB)
- SolidWorks (427 KB)
- STEP (256 KB)
- PLCH30M300C1 - Straight solder PCB mount male connector, 0.000030 inch [0.75μ] gold over nickel.
- Drawing (131 KB)
- IGES (330 KB)
- SolidWorks (520 KB)
- STEP (206 KB)
- PLCH30M3N0A1 - Straight solder PCB mount male connector
- Drawing (128 KB)
- IGES (356 KB)
- SolidWorks (341 KB)
- STEP (221 KB)
- PLCH30M3N0A2 - Straight solder PCB mount male connector, push-on fastener, Gold flash over nickel on mating end and tin-lead solder coat on termination end.
- IGES (327 KB)
- SolidWorks (383 KB)
- STEP (217 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removable contacts, female solder
- FS112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (81 KB)
Removable contacts, male solder
- MS112NS - High conductivity size 16 for use with 12 AWG.
- Drawing (82 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
Removeable contacts, male crimp
- MC112N-133.0 - Size 16 contact for use with 12 AWG, sequential mate 6.35 [.250] length.
- Drawing (103 KB)
- MC112N-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length.
- Drawing (79 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-133.2 - Size 16 contact for use with 12 AWG, sequential mate .310 length.
- Drawing (91 KB)
- MC112N/AA-133.3 - Size 16 contact for use with 12 AWG, sequential mate .370 length.
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS-133.1 - Size 16 contact for use with 12 AWG, sequential mate .290 length, high conductivity material.
- IGES (83 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC116N/AA-133.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.250 length.
- Drawing (82 KB)
- MC116N/AA-133.1 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.290 length.
- Drawing (90 KB)
- MC116N/AA-133.2 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.310 length.
- Drawing (83 KB)
- MC116N/AA-133.3 - Size 16 contact for use with 16 AWG wire, RoHS compliant, sequential mate 0.370 length.
- Drawing (83 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MCS126N - Size 16 contact for use with RG 178 B/U or RG 196 A/U shielded cable, crimp/solder.
- Drawing (47 KB)
- MCS226N - Size 16 contact for use with RG 179 A/U, RG 316 /U shielded cable, crimp/solder.
- Drawing (121 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
