Four size 12, nine size 16 and twelve size 20 contacts
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight press-fit
PCB mount, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, male crimp
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- GFSH435M182 - Panel mount connector for use with male removable contacts, panel float mount
- Drawing (126 KB)
- GFSH435F1H - Panel mount connector for use with female removable contacts
- Drawing (252 KB)
- IGES (134 KB)
- SolidWorks (69 KB)
- STEP (65 KB)
- GFSH435M1H - Panel mount connector for use with male removable contacts
- Drawing (252 KB)
- IGES (141 KB)
- SolidWorks (79 KB)
- STEP (71 KB)
PCB mount, right angle solder
- GFSH435M48LN - Right angle (90°) PCB mount male connector with super conductive contacts, board lock angle brackets.
- IGES (583 KB)
- SolidWorks (1.3 MB)
- STEP (333 KB)
- GFSH435M4H - Right angle (90°) PCB mount male connector
- Drawing (540 KB)
- GFSH435M4LN - Right angle (90°) PCB mount male connector with board lock angle brackets
- Drawing (461 KB)
- GFSH435F4B - Right angle (90°) PCB mount female connector
- Drawing (381 KB)
- IGES (161 KB)
- SolidWorks (524 KB)
- STEP (184 KB)
- GFSH435M4B - Right angle (90°) PCB mount male connector
- Drawing (387 KB)
- IGES (358 KB)
- SolidWorks (881 KB)
- STEP (200 KB)
PCB mount, straight press-fit
- GFSH435F93H - Straight compliant press-fit termination PCB mount female connector
- Drawing (428 KB)
- IGES (199 KB)
- SolidWorks (567 KB)
- STEP (107 KB)
PCB mount, straight solder
- GFSH435F38N - Straight solder PCB mount female connector with super conductive contacts, push-on fastener.
- IGES (564 KB)
- SolidWorks (1.8 MB)
- STEP (339 KB)
- GFSH435F3N - Straight solder PCB mount female connector, push-on fastener.
- Drawing (406 KB)
- GFSH435F3H - Straight solder PCB mount female connector
- Drawing (385 KB)
- IGES (171 KB)
- SolidWorks (367 KB)
- STEP (91 KB)
- GFSH435M3H - Straight solder PCB mount male connector
- Drawing (321 KB)
- IGES (176 KB)
- SolidWorks (579 KB)
- STEP (92 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC610N2/AA - Size 12 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (77 KB)
- FC610N2S/AA - High conductivity material, size 12 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (78 KB)
- FC612N2/AA - Size 12 contact for use with 12 AWG wire, RoHS compliant.
- Drawing (88 KB)
Removeable contacts, male crimp
- MC112N-133.5 - Size 16 contact for use with 12 AWG, first mate contact.
- Drawing (44 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-133.5 - Size 16 for use with 14 AWG, first mate contact.
- Drawing (89 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC120N-133.5 - Size 16 contact for use with 20 AWG wire, first mate.
- Drawing (78 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MC610NS/AA - High conductivity material, size 12 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (83 KB)
- MC612N-228.1 - Size 12 contact for use with 12 AWG wire, first mate.
- Drawing (83 KB)
- MC612N/AA - Size 12 contact for use with 12 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (37 KB)
- SolidWorks (106 KB)
- STEP (14 KB)
