Partially populated connector with sixteen size 16 power contacts and ten size 20 signal contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight press-fit
PCB mount, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, male crimp
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- GFSH01F183 - Panel mount connector for use with female removable contacts, panel float mount.
- Drawing (339 KB)
PCB mount, right angle solder
- GFSH01M4H - Right angle (90°) PCB mount male connector
- Drawing (388 KB)
PCB mount, straight press-fit
- GFSH01M94H - Straight compliant press-fit termination PCB mount male connector
- Drawing (332 KB)
PCB mount, straight solder
- GFSH01F3H - Straight solder PCB mount female connector
- Drawing (367 KB)
- GFSH01F3N - Straight solder PCB mount female connector, push-on fastener.
- Drawing (376 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (249 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC720N2 - Size 20 contact for use with 20 AWG wire.
- IGES (140 KB)
- SolidWorks (275 KB)
- STEP (52 KB)
- FC720N2/AA - Size 20 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (79 KB)
Removeable contacts, male crimp
- MC112N-133.5 - Size 16 contact for use with 12 AWG, first mate contact.
- Drawing (44 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-133.5 - Size 16 for use with 14 AWG, first mate contact.
- Drawing (89 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC120N-133.5 - Size 16 contact for use with 20 AWG wire, first mate.
- Drawing (78 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MC720N/AA - Size 20 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (87 KB)
- SolidWorks (135 KB)
- STEP (31 KB)
