eighteen size 16 and 28 size 22 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight press-fit
PCB mount, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, male crimp
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- GFSH928F183 - Panel mount connector for use with female removable contacts, panel float mount.
- Drawing (297 KB)
- GFSH928F1H - Panel mount connector for use with female removable contacts
- Drawing (259 KB)
- IGES (168 KB)
- SolidWorks (94 KB)
- STEP (83 KB)
- GFSH928M183 - Panel mount connector for use with male removable contacts, panel float mount
- Drawing (262 KB)
- GFSH928M1H - Panel mount connector for use with male removable contacts
- Drawing (252 KB)
- IGES (269 KB)
- SolidWorks (118 KB)
- STEP (138 KB)
PCB mount, right angle solder
- GFSH928F4B - Right angle (90°) PCB mount female connector
- Drawing (349 KB)
- IGES (168 KB)
- SolidWorks (966 KB)
- STEP (199 KB)
- GFSH928F4H - Right angle (90°) PCB mount female connector
- Drawing (452 KB)
- GFSH928F4LN - Right angle (90°) PCB mount female connector, board lock angle brackets.
- Drawing (418 KB)
- GFSH928M4B - Right angle (90°) PCB mount male connector
- Drawing (326 KB)
- IGES (902 KB)
- SolidWorks (711 KB)
- STEP (582 KB)
PCB mount, straight press-fit
- GFSH928F93H - Straight compliant press-fit termination PCB mount female connector
- Drawing (626 KB)
- IGES (857 KB)
- SolidWorks (559 KB)
- STEP (586 KB)
PCB mount, straight solder
- GFSH928F3H - Straight solder PCB mount female connector
- Drawing (368 KB)
- IGES (625 KB)
- SolidWorks (368 KB)
- STEP (375 KB)
- GFSH928M3H - Straight solder PCB mount male connector
- Drawing (367 KB)
- IGES (686 KB)
- SolidWorks (430 KB)
- STEP (444 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (249 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC420N6/AA - Size 22 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (79 KB)
- FC422N6 - Size 22 contact for use with 22 AWG wire, RoHS compliant.
- Drawing (82 KB)
Removeable contacts, male crimp
- MC112N-133.5 - Size 16 contact for use with 12 AWG, first mate contact.
- Drawing (44 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-133.5 - Size 16 for use with 14 AWG, first mate contact.
- Drawing (89 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC120N-133.5 - Size 16 contact for use with 20 AWG wire, first mate.
- Drawing (78 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MC420N/AA - Size 22 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (75 KB)
- MC422N/AA - Size 22 contact for use with 22 AWG wire, RoHS compliant.
- Drawing (75 KB)
- IGES (93 KB)
- SolidWorks (181 KB)
- STEP (35 KB)
