Eight size 16 and nine size 22 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight press-fit
PCB mount, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, male crimp
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- GFSH89F1E - Panel mount connector with rotating male jackscrews for use with female removable contacts
- Drawing (263 KB)
- GFSH89F1H - Panel mount connector for use with female removable contacts
- Drawing (248 KB)
- IGES (74 KB)
- SolidWorks (46 KB)
- STEP (31 KB)
- GFSH89F1T - Panel mount connector with fixed female jackscrews for use with female removable contacts
- Drawing (249 KB)
- GFSH89M1E - Panel mount connector with rotating male jackscrews for use with male removable contacts
- Drawing (432 KB)
- GFSH89M1H - Panel mount connector for use with male removable contacts
- Drawing (246 KB)
- IGES (110 KB)
- SolidWorks (82 KB)
- STEP (58 KB)
- GFSH89M1T - Panel mount connector with fixed jackscrews for use with male removable contacts
- Drawing (252 KB)
PCB mount, right angle solder
- GFSH89F4B - Right angle (90°) PCB mount female connector
- Drawing (339 KB)
- IGES (142 KB)
- SolidWorks (1.3 MB)
- STEP (347 KB)
- GFSH89F4H - Right angle (90°) PCB mount female connector
- Drawing (359 KB)
- GFSH89F4LN - Right angle (90°) PCB mount female connector, board lock angle brackets.
- Drawing (422 KB)
- GFSH89M47LN - Right angle (90°) PCB mount male connector with super conductive contacts, board lock angle brackets.
- IGES (457 KB)
- SolidWorks (969 KB)
- STEP (261 KB)
- GFSH89M4H - Right angle (90°) PCB mount male connector
- Drawing (356 KB)
- GFSH89M4B - Right angle (90°) PCB mount male connector
- GFSH89M4LN - Right angle (90°) PCB mount male connector with board lock angle brackets
PCB mount, straight press-fit
- GFSH89F93H - Straight compliant press-fit termination PCB mount female connector
- Drawing (616 KB)
- IGES (188 KB)
- SolidWorks (359 KB)
- STEP (107 KB)
PCB mount, straight solder
- GFSH89F37N -
- IGES (574 KB)
- SolidWorks (1.2 MB)
- STEP (334 KB)
- GFSH89F3H - Straight solder PCB mount female connector
- Drawing (316 KB)
- IGES (169 KB)
- SolidWorks (245 KB)
- STEP (91 KB)
- GFSH89M3H - Straight solder PCB mount male connector
- Drawing (253 KB)
- IGES (199 KB)
- SolidWorks (562 KB)
- STEP (255 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (249 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC420N6/AA - Size 22 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (79 KB)
- FC422N6 - Size 22 contact for use with 22 AWG wire, RoHS compliant.
- Drawing (82 KB)
Removeable contacts, male crimp
- MC112N-133.5 - Size 16 contact for use with 12 AWG, first mate contact.
- Drawing (44 KB)
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-133.5 - Size 16 for use with 14 AWG, first mate contact.
- Drawing (89 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC120N-133.5 - Size 16 contact for use with 20 AWG wire, first mate.
- Drawing (78 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MC420N/AA - Size 22 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (75 KB)
- MC422N/AA - Size 22 contact for use with 22 AWG wire, RoHS compliant.
- Drawing (75 KB)
- IGES (93 KB)
- SolidWorks (181 KB)
- STEP (35 KB)
