Seven 20 amp power contacts
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight press-fit
PCB mount, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, male crimp
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- DF000W - Hood with strain relief, top and side opening
- Drawing (249 KB)
- IGES (347 KB)
- SolidWorks (330 KB)
- STEP (246 KB)
- DF07F00 - Cable connector for use with female removable contacts
- Drawing (248 KB)
- IGES (114 KB)
- SolidWorks (95 KB)
- STEP (72 KB)
- DF07M00 - Cable connector for use with male removable contacts
- Drawing (174 KB)
- IGES (112 KB)
- SolidWorks (94 KB)
- STEP (70 KB)
PCB mount, right angle solder
- DF07F4BN - Right angle (90°) PCB mount female connector, plastic mounting bracket, push-on fastener.
- Drawing (308 KB)
- DF07M4BN - Right angle (90°) PCB mount male connector, plastic bracket, push-on fastener.
- Drawing (351 KB)
- DF07F4B - Right angle (90°) PCB mount female connector
- Drawing (280 KB)
- IGES (337 KB)
- SolidWorks (258 KB)
- STEP (218 KB)
- DF07M4B - Right angle (90°) PCB mount male connector
- Drawing (270 KB)
- IGES (276 KB)
- SolidWorks (208 KB)
- STEP (163 KB)
PCB mount, straight press-fit
- DF07F930 - Straight compliant press-fit termination PCB mount female connector
- Drawing (144 KB)
- IGES (220 KB)
- SolidWorks (145 KB)
- STEP (139 KB)
PCB mount, straight solder
- DF07M3N - Straight solder PCB mount male connector, push-on fastener.
- Drawing (288 KB)
- DF07F30 - Straight solder PCB mount female connector
- Drawing (263 KB)
- IGES (176 KB)
- SolidWorks (131 KB)
- STEP (110 KB)
- DF07M30 - Straight solder PCB mount male connector
- Drawing (260 KB)
- IGES (186 KB)
- SolidWorks (132 KB)
- STEP (113 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
Removeable contacts, male crimp
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
