Two-pole autoshunting connector with 15 amp power contacts
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight solder
Removeable contacts, female crimp
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- DF000W - Hood with strain relief, top and side opening
- Drawing (249 KB)
- IGES (347 KB)
- SolidWorks (330 KB)
- STEP (246 KB)
- DFS02F00 - Cable connector for use with female removable contacts
- Drawing (81 KB)
- DFS02F0PS/AA - Cable connector for use with female removable contacts, panel mount adaptor, RoHS compliant.
- Drawing (378 KB)
- DFS02M00 - Cable connector for use with male removable contacts
- Drawing (81 KB)
- DFS02M70/AA - Cable connector supplied with male screw termination contacts, RoHS compliant.
- Drawing (348 KB)
PCB mount, right angle solder
- DFS02F4B/AA - Right angle (90°) PCB mount female connector, plastic mounting bracket.
- Drawing (323 KB)
PCB mount, straight solder
- DFS02F30/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (330 KB)
- DFS02F3N/AA - Straight solder PCB mount female connector, push-on fastener, RoHS compliant.
- Drawing (333 KB)
Removeable contacts, female crimp
- FC112N2-1565.0 - Size 16 contact for use with 12 AWG
- FC114N2/AA-14-1565.0 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (98 KB)
- FC114N2/AA-1565.0 - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- FC116N2/AA-1565.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (86 KB)
- FC120N2-14-1565.0 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (85 KB)
- FC120N2/AA-1565.0 - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (91 KB)
