Eleven 34 amp power contacts, with fifteen signal contacts
Cable/Panel Mount Connectors
PCB mount, contacts: right angle solder
PCB mount, contacts: straight press-fit
PCB mount, contacts: straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PCIB26W11F8000/AA - Panel mount for use with female removable contacts terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (165 KB)
- IGES (120 KB)
- SolidWorks (126 KB)
- STEP (38 KB)
- PCIB26W11F8000 - Panel mount for use with female removable contacts
- Drawing (132 KB)
- PCIB26W11F8000-443.0 - Panel mount with rotating jackscrew system for use with female removable contacts
- Drawing (162 KB)
- IGES (188 KB)
- SolidWorks (176 KB)
- STEP (141 KB)
PCB mount, contacts: right angle solder
- PCIB26W11F400A1/AA - Right angle (90°) PCB mount female connector, RoHS compliant.
- Drawing (206 KB)
- IGES (468 KB)
- SolidWorks (661 KB)
- STEP (268 KB)
- PCIB26W11RM400A1 - Inverted style, right angle (90°) PCB mount male connector.
- Drawing (175 KB)
- PCIB26W11F400A1 - Right angle (90°) PCB mount female connector
- Drawing (191 KB)
- PCIB26W11M400A1 - Right angle (90°) PCB mount male connector
- Drawing (190 KB)
- IGES (428 KB)
- SolidWorks (586 KB)
- STEP (265 KB)
PCB mount, contacts: straight press-fit
- PCIB26W11F9300A1/AA - Straight compliant press-fit termination PCB mount female connector, RoHS compliant.
- Drawing (201 KB)
- IGES (588 KB)
- SolidWorks (830 KB)
- STEP (336 KB)
- PCIB26W11M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (202 KB)
- IGES (505 KB)
- SolidWorks (1.3 MB)
- STEP (268 KB)
- PCIB26W11M9300A1/AA-444.0 - Straight compliant press-fit termination PCB mount male connector with fixed jackscrew system, RoHS compliant.
- IGES (647 KB)
- SolidWorks (6.4 MB)
- STEP (356 KB)
- PCIB26W11M9400A1 - Straight compliant press-fit termination PCB mount male connector for use with board
thickness of 4.45 minimum [0.175 minimum].
- Drawing (172 KB)
- PCIB26W11F9300A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (67 KB)
- PCIB26W11F9300A1-246.6 - Straight compliant press-fit termination PCB mount female connector with low profile AC pass-through.
- Drawing (221 KB)
- PCIB26W11M9300A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (194 KB)
- PCIB26W11M9300A1-444.0 - Straight compliant press-fit termination PCB mount male connector with fixed jackscrew system
- Drawing (186 KB)
PCB mount, contacts: straight solder
- PCIB26W11F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (194 KB)
- SolidWorks (466 KB)
- PCIB26W11M300A1-444.0 - Straight solder PCB mount male connector, special molding and fixed jackscrews.
- IGES (408 KB)
- SolidWorks (3.8 MB)
- PCIB26W11F300A1 - Straight solder PCB mount female connector
- Drawing (181 KB)
- PCIB26W11F300A1-246.6 - Straight solder PCB mount female connector with low profile AC pass-through
- Drawing (217 KB)
- PCIB26W11M300A1 - Straight solder PCB mount male connector
- Drawing (183 KB)
- IGES (248 KB)
- SolidWorks (519 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removeable contacts, female crimp
- FC112N2S/AA-1565.0 - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (88 KB)
- FC114N2/AA-14-1565.0 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (98 KB)
- FC114N2/AA-1565.0 - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- FC116N2/AA-1565.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (86 KB)
- FC120N2-14-1565.0 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (85 KB)
- FC120N2/AA-1565.0 - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (91 KB)
