Three 40 amp and four 30 amp power contacts, with nine signal contacts
Cable/Panel Mount Connectors
PCB mount, contacts: right angle solder
PCB mount, contacts: straight press-fit
PCB mount, contacts: straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- PCIC16W7F8000/AA - Panel mount for use with female removable contacts terminating side of
insulator has c’bore for large wire sizes, RoHS compliant.
- Drawing (130 KB)
- IGES (81 KB)
- SolidWorks (222 KB)
- STEP (28 KB)
- PCIC16W7F8000 - Panel mount for use with female removable contacts
- Drawing (126 KB)
PCB mount, contacts: right angle solder
- PCIC16W7F400A1/AA - Right angle (90°) PCB mount female connector, RoHS compliant.
- PCIC16W7M400A1/AA - Right angle (90°) PCB mount male connector, RoHS compliant
- Drawing (215 KB)
- IGES (279 KB)
- SolidWorks (359 KB)
- STEP (149 KB)
- PCIC16W7RM400A1 - Inverted style, right angle (90°) PCB mount male connector.
- Drawing (104 KB)
- PCIC16W7F400A1 - Right angle (90°) PCB mount female connector
- Drawing (213 KB)
- IGES (358 KB)
- SolidWorks (991 KB)
- PCIC16W7M400A1 - Right angle (90°) PCB mount male connector
- Drawing (209 KB)
PCB mount, contacts: straight press-fit
- PCIC16W7F9300A1/AA - Straight compliant press-fit termination PCB mount female connector, RoHS compliant.
- Drawing (73 KB)
- IGES (266 KB)
- SolidWorks (391 KB)
- STEP (140 KB)
- PCIC16W7M9300A1/AA - Straight compliant press-fit termination PCB mount male connector, RoHS compliant
- Drawing (73 KB)
- PCIC16W7F9300A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (71 KB)
- PCIC16W7F9300A1-246.2 - Straight compliant press-fit termination PCB mount female connector with low profile AC pass-through.
- Drawing (77 KB)
- IGES (217 KB)
- SolidWorks (303 KB)
- STEP (120 KB)
- PCIC16W7M9300A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (72 KB)
- IGES (257 KB)
- SolidWorks (1.2 MB)
- STEP (140 KB)
PCB mount, contacts: straight solder
- PCIC16W7F300A1/AA - Straight solder PCB mount female connector, RoHS compliant.
- Drawing (206 KB)
- IGES (263 KB)
- SolidWorks (352 KB)
- STEP (160 KB)
- PCIC16W7M300A1/AA - Straight solder PCB mount male connector, RoHS compliant
- Drawing (202 KB)
- IGES (124 KB)
- SolidWorks (161 KB)
- STEP (74 KB)
- PCIC16W7F300A1 - Straight solder PCB mount female connector
- Drawing (202 KB)
- PCIC16W7F300A1-246.2 - Straight solder PCB mount female connector with low profile AC pass-through
- Drawing (221 KB)
- IGES (202 KB)
- SolidWorks (280 KB)
- STEP (116 KB)
- PCIC16W7M300A1 - Straight solder PCB mount male connector
- Drawing (196 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removeable contacts, female crimp
- FC112N2S/AA-1565.0 - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (88 KB)
- FC114N2/AA-14-1565.0 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (98 KB)
- FC114N2/AA-1565.0 - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- FC116N2/AA-1565.0 - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (86 KB)
- FC120N2-14-1565.0 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (85 KB)
- FC120N2/AA-1565.0 - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (91 KB)
