Twelve size 22 removable signal contacts
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight solder
Removeable contacts, female crimp
Removeable contacts, male crimp
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- KC1222F10 - Panel mount connector for use with female removable contacts
- Drawing (292 KB)
- KC1222F10J/AA - Cable connector, hood with gripper, non-IP65, removable female crimp contacts, RoHS compliant
- Drawing (359 KB)
- IGES (954 KB)
- SolidWorks (1.7 MB)
- STEP (418 KB)
- KC1222F10JE/AA - Cable connector, hood with gripper and boot, IP65, removable female crimp contacts, RoHS compliant
- Drawing (415 KB)
- KC1222M1P0/AA - Front panel mount, with jam nut, non-IP65, removable male crimp contacts, RoHS compliant
- Drawing (336 KB)
- IGES (300 KB)
- SolidWorks (625 KB)
- STEP (143 KB)
- KC1222M1PE0/AA - Front panel mount, with jam nut and gasket, IP65, removable male crimp contacts, RoHS compliant
- Drawing (349 KB)
- KC1222M1PR0/AA - Rear panel mount, non-IP65, removable male crimp contacts, RoHS compliant
- Drawing (325 KB)
- IGES (243 KB)
- SolidWorks (389 KB)
- STEP (202 KB)
- KC1222M1PRE0/AA - Rear panel mount, with gasket, IP65, removable male crimp contacts, RoHS compliant
- Drawing (328 KB)
PCB mount, right angle solder
- KC1222M4P0 - Right angle (90°) PCB mount male connector, Front panel mount male connectors with jam nut, non-IP65.
- Drawing (348 KB)
PCB mount, straight solder
- KC1222M30 - Straight solder PCB mount male connector
- Drawing (351 KB)
- KC1222M3P0 - Straight solder PCB mount male connector, Front panel mount male connectors with jam nut, non-IP65.
- Drawing (334 KB)
Removeable contacts, female crimp
- FC422N2/AA - Size 22 contact for use with 22 AWG wire, RoHS compliant.
Removeable contacts, male crimp
- MC422N/AA - Size 22 contact for use with 22 AWG wire, RoHS compliant.
- Drawing (75 KB)
- IGES (93 KB)
- SolidWorks (181 KB)
- STEP (35 KB)
