UL Recognized: File #E49351
Materials and Finishes
| Connector Insert: |
Glass-filled DAP per ASTM-D-5948 Type SDG-F. Gray color is standard. |
| Fixed Contacts: |
Precision machined copper alloy,
gold flash over nickel. Other finishes are available upon request. |
| |
|
Environmental Initiatives
|
Mechanical Characteristics
| Size 20 Fixed Contacts: |
Male: 1.02 mm [0.040 inch] mating diameter.
Female: Open entry is standard. "Closed Entry" available on solder cup termination for high reliability
applications. |
| Contact Retention in Connector Insert: |
44.5 N [10 lbs.], minimum.
|
| |
| Contact Terminations: |
| Solder cup contacts: |
1.17 mm [0.046 inch] hole diameter for 0.5 mm² [20 AWG] wire maximum. |
| Straight and right angle (90°) printed board mount: |
0.64 mm [0.025 inch] termination diameter. |
| |
| Locking Systems: |
Friction. |
| Polarization: |
Gender positioning of contacts. |
| Mechanical Operations: |
Open entry contacts: 500 operations per IEC 60512-5.
Closed entry contacts: 1,000 operations per IEC 60512-5. |
Electrical Charactersistics
| Contact Current Rating: |
7.5 amperes, maximum. |
| Initial Contact Resistance: |
0.010 ohms, maximum. |
| Flash over Voltage: |
2000 VAC (rms). |
| Test Voltage: |
1200 VAC (rms). |
| Insulation Resistance: |
5 G ohms, minimum. |
| Clearance and Creepage: |
0.97 mm [0.038 inch], minimum. |
| Working Voltage: |
300 VAC (rms). |
Climatic Characteristics
| Temperature Range: |
-55°C to +125°C. |
| Damp Heat, Steady State: |
21 days |
Feeds