26 position
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- WDD26F220Z0S - Femal connector, solder contacts, soldered to wire and encapsulated in epoxy resin with 20 inch (50 cm) flying leads, composite hood with rotating male jackscrews, stainless steel shells and jackscrews, contacts 0.000030 inch (0.8μ) gold plated over nickel.
- Drawing (144 KB)
- WDD26F2C5AT7S - Fixed solder cup termination female connector, inside wall mounting, inside wall mount sealing plate, fixed female jackscrews, stainless steel shells and jackscrews,
contacts 0.000030 inch (0.8μ) gold plated over nickel.
- Drawing (118 KB)
- IGES (805 KB)
- SolidWorks (1.1 MB)
- STEP (496 KB)
- WDD26P2C5AT7S - Fixed solder cup termination male connector with interfacial seal, inside wall mounting, inside wall mount sealing plate, fixed female jackscrews, stainless steel shells and jackscrews, contacts 0.000030 inch (0.8μ) gold plated over nickel.
- Drawing (118 KB)
- IGES (442 KB)
- SolidWorks (1.5 MB)
- STEP (290 KB)
- WDD26P2C9B00 - Fixed solder cup termination male connector with interfacial seal, outside wall mounting, outside wall mount sealing plate, fixed female jackscrews, steel shells and jackscrews zinc plated with
dichromate seal, contacts gold flash over nickel plate.
- IGES (539 KB)
- SolidWorks (1.8 MB)
- STEP (364 KB)
- WDD26P2C9B0S - Fixed solder cup termination male connector with interfacial seal, outside wall mounting, outside wall mount sealing plate, fixed female jackscrews, stainless steel shells and jackscrews, contacts 0.000030 inch (0.8μ) gold plated over nickel.
- IGES (534 KB)
- SolidWorks (1.7 MB)
- STEP (331 KB)
PCB mount, right angle solder
- WDD26F4C7AT7S - Right angle solder PCB mount female connector, inside wall mounting with push-on fastener, inside wall mount sealing plate, fixed female jackscrews, stainless steel shells and jackscrews,
contacts 0.000030 inch (0.8μ) gold plated over nickel.
- Drawing (136 KB)
- WDD26P4C7AT7S - Right angle solder PCB mount male connector with interfacial seal, inside wall mounting with push-on fastener, inside wall mount sealing plate, fixed female jackscrews, stainless steel shells and jackscrews,
contacts 0.000030 inch (0.8μ) gold plated over nickel.
- IGES (518 KB)
- SolidWorks (687 KB)
- STEP (286 KB)
PCB mount, straight solder
- WDD26P3C5AT7S - Straight solder PCB mount male connector with interfacial seal, inside wall mounting, inside wall mount sealing plate, fixed female jackscrews, steel shells and jackscrews zinc plated with dichromate seal, contacts gold flash over nickel plate.
- Drawing (145 KB)
- WDD26P3C8AT70 - Straight solder PCB mount male connector with interfacial seal, inside wall mounting with push-on fastener, inside wall mount sealing plate, fixed female jackscrews, steel shells and jackscrews zinc plated with dichromate seal, contacts gold flash over nickel plate.
- IGES (438 KB)
- SolidWorks (703 KB)
- STEP (269 KB)
