Dual Port

Technical Specifications

 
Materials and Finishes
Insulator:
DP, MDP Series: Nylon resin, UL 94V-0, black color.
DD* Series: Glass-filled polyester per MIL-M-24519, UL 94V-0, black color.
XD* Series: Glass-filled polyester per MIL-M-24519, UL 94V-0 for high density connector and nylon resin, UL 94V-0 for standard density connector. Black color.
CBDP Series: Glass-filled polyester, per MIL-M-24519, UL 94, blue color, and composite.
 
Contacts:
DP, MDP Series: Male contacts: Precision-machined brass alloy
Female contacts: Precision-machined high tensile copper alloy
DD* Series: Male contacts: Precision-machined high tensile phosphor bronze

Female contacts: Precision-machined high tensile phosphor bronze
XD* Series: Male contacts: Precision-machined copper alloy

Female contacts: Precision-machined high tensile phosphor bronze
CBDP Series: Precision-machined copper alloy
 
Contact Plating: Gold flash over nickel plate. Other finishes available upon request.
Shells: DP, MDP, DD*, XD*: Steel or brass with tin plate; zinc plate with chromate seal.

CBDP: Steel or brass with tin plate; zinc plate with chromate seal; stainless steel passivated.

Other materials and finishes available upon request.
Mounting Spacers and Brackets: DP, MDP, DD*, XD*: Steel or brass with tin plate; zinc plate with chromate seal.

CBDP: Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosophor bronze with tin plate; stainless steel, passivated.
Cross Bar: Nylon resin, UL 94V-0, black color.
Push-on Fasteners: Beryllium copper with tin plate.
Jackscrews Systems: DP, MDP, DD*, XD*: Steel with zinc plate and chromate seal or clear zinc plate.

CBDP: Brass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated.
Vibration Lock Systems: Slide lock and lock tabs, steel with nickel plate.
 
Environmental Initiatives

Non-magnetic versions are available, contact Technical Sales.

Electrical Characteristics
Contact Current Ratings:
DP, MDP Series: 5 amps nominal
DD* Series: 3 amps nominal
XD* Series: 5 amps nominal for standard density connectors
3 amps nominal for high density connectors
CBDP Series: Size 20 contacts: 7.5 amps nominal

Size 8 power contacts: 39 amps, per UL 1977
 
Initial Contact Resistance:
DP, MDP Series: 0.008 ohms maximum
DD* Series: 0.010 ohms maximum
XD* Series: 0.010 ohms maximum
CBDP Series: Size 20 contacts: 0.008 ohms maximum

Size 8 power contacts: 0.0005 ohms max. per IEC 512-2, Test 2b
 
Proof Voltage: 1000 V r.m.s.
Insulation Resistance: 5 G ohms
Clearance and Creepage Distance: 0.039 inch (1.0 mm) minimum
Working Voltage: 300 V r.m.s.
Mechanical Characteristics
Fixed Contacts:
DP, MDP Series: Size 20 contacts.

Male contact: 0.040 inch (1.02 mm) diameter.

Female contact: Rugged open entry Robi-D design.
DD* Series: Size 22 contacts.

Male contact: 0.030 inch (0.76 mm) diameter.

Female contact: Rugged open entry Robi-D design.
XD* Series: Size 20 contacts on top connector.

Male contact: 0.040 inch (1.02 mm) diameter.

Size 22 contacts on bottom connector.

Male contact: 0.030 (0.76 mm) diameter.

Female contact: Rugged open entry Robi-D design.
CBDP Series: Signal Contacts: Size 20 contacts, male - 0.040 inch (1.02 mm) mating diameter. Female contact - rugged open entry. PosiBand closed entry female options are also available.

Power Contacts: Size 8 contacts, male - 0.142 inch (3.61 mm) mating diameter.
 
Contact Retention in Insulator: DP, MDP Series: 6 lbs. (27 N)

DD*, XD* Series: 7 lbs. (31 N).

CBDP Series signal contacts: 9 lbs. (40 N)

CBDP Series power contacts: 22 lbs. (98 N)
Contact Terminations: DP, MDP Series: Right angle printed board mount with terminations supported in footprint pattern by a plastic cross bar. Termination diameter 0.028 inch (0.71 mm) and 0.024 (0.60 mm).

DD* Series: Right angle printed board mount with terminations supported in footprint pattern by a plastic cross bar. Termination diameter 0.020 inch (0.51 mm).

XD* Series: Right angle printed board mount with terminations supported in footprint pattern by a plastic cross bar. Termination diameter 0.030 inch (0.76 mm) and 0.028 (0.71 mm).

CBDP Series signal contacts: Right angle (90°) printed board mount terminations supported by alignment bar. Termination diameter: 0.028 inch (0.71 mm).

CBDP Series power contacts: Right angle (90°) printed board mount with terminations of 0.078 inch (1.98 mm) diameter.
Shells: Male shells may be dimpled for EMI / ESD ground paths.
Polarization: Trapezoidally shaped shells and polarized jackscrews.
Mounting Bracket Riveted to Connector: Riveted fasteners with 0.120 inch (3.05 mm) diameter clearance hole, with 4-40 threads or 4-40 threads with nylon lock insert.
Mounting to Printed Board: Rapid installation push-on fasteners.
Locking Systems: Jackscrews and vibration locking systems for either front or rear panel monunted connectors.
Mechanical Operations: 500 operations minimum per IEC 512-5
Climatic Characteristics
Temperature Range: -55°C to +125°C
Damp Heat, Steady State: DP, MDP, CBDP Series: 10 days
Dual Port