Nine size 12 and twenty-four size 16 contacts.
Cable/Panel Mount Connectors
PCB mount, right angle solder
PCB mount, straight press-fit
PCB mount, straight solder
Press-fit PCB hole sizes
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/Panel Mount Connectors
- IP000J0 - Robust plastic cable adapter.
- Drawing (111 KB)
- IP33W9F00T0 - Cable connector for use with female removable contacts, fixed female jackscrew.
- Drawing (189 KB)
- IP33W9F0H00 - Cable connector for use with female removable contacts, mounting plate with floating bushings.
- Drawing (156 KB)
- IP33W9F0HT0 - Cable connector for use with female removable contacts, mounting plate with floating bushings, fixed female jackscrew.
- Drawing (115 KB)
- IP33W9M0000 - Cable connector for use with male removable contacts
- Drawing (94 KB)
- IP33W9M00E0 - Cable connector for use with removable male contacts, rotating male jackscrew.
- Drawing (140 KB)
- IP33W9M0JEL0 - Cable connector for use with male removable contacts, robust plastic cable adapter, rotating male jackscrew.
- Drawing (152 KB)
PCB mount, right angle solder
- IP33W9F40TA1 - Right angle (90°) PCB mount female connector, fixed female jackscrew.
- Drawing (297 KB)
- IP33W9M400A1 - Right angle (90°) PCB mount male connector
- Drawing (274 KB)
PCB mount, straight press-fit
- IP33W9F930TA1 - Straight compliant press-fit termination PCB mount female connector, fixed female jackscrew.
- Drawing (172 KB)
PCB mount, straight solder
- IP33W9F300A1 - Straight solder PCB mount female connector
- Drawing (267 KB)
- IP33W9F30TA1 - Straight solder PCB mount female connector, fixed female jackscrew.
- Drawing (285 KB)
- IP33W9M300A1 - Straight solder PCB mount male connector
- Drawing (217 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removeable contacts, female crimp
- FC112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (260 KB)
- STEP (42 KB)
- FC112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (97 KB)
- SolidWorks (183 KB)
- STEP (42 KB)
- FC112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (80 KB)
- IGES (97 KB)
- SolidWorks (236 KB)
- STEP (44 KB)
- FC112N2S/AA-14 - High conductivity size 16 for use with 12 AWG, 0.000030 inch [0.75µ] gold over nickel on mating end and
termination end, RoHS compliant.
- Drawing (80 KB)
- FC114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (85 KB)
- IGES (120 KB)
- SolidWorks (301 KB)
- STEP (58 KB)
- FC114N2/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- Drawing (81 KB)
- FC116N2 - Size 16 contact for use with 16 AWG wire.
- IGES (114 KB)
- SolidWorks (267 KB)
- STEP (53 KB)
- FC116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC116N2/AA-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- Drawing (80 KB)
- FC120N2 - Size 16 contact for use with 20 AWG wire.
- IGES (127 KB)
- SolidWorks (242 KB)
- STEP (47 KB)
- FC120N2-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (78 KB)
- FC120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (80 KB)
- FC610N2S/AA - High conductivity material, size 12 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (78 KB)
- FC612N2 - Size 12 contact for use with 12 AWG wire.
- IGES (90 KB)
- SolidWorks (181 KB)
- STEP (40 KB)
- FC612N2/AA - Size 12 contact for use with 12 AWG wire, RoHS compliant.
- Drawing (88 KB)
Removeable contacts, female solder
- FS112N2/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (84 KB)
- FS112N2/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (86 KB)
- IGES (103 KB)
- SolidWorks (282 KB)
- STEP (49 KB)
- FS112N2S - High conductivity size 16 for use with 12 AWG.
- Drawing (81 KB)
- FS114N2/AA - Size 16 for use with 14 AWG, RoHS compliant.
- Drawing (90 KB)
- IGES (121 KB)
- SolidWorks (281 KB)
- STEP (64 KB)
- FS116N2/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- IGES (144 KB)
- SolidWorks (281 KB)
- STEP (58 KB)
- FS120N2/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (85 KB)
- FS612N2 - Size 12 contact for use with 12 AWG wire.
- Drawing (82 KB)
- IGES (96 KB)
- SolidWorks (207 KB)
- STEP (46 KB)
Removeable contacts, male crimp
- MC112N/AA - Size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (70 KB)
- SolidWorks (151 KB)
- STEP (25 KB)
- MC112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- Drawing (79 KB)
- IGES (83 KB)
- SolidWorks (253 KB)
- STEP (39 KB)
- MC112NS/AA - High conductivity size 16 for use with 12 AWG, RoHS compliant.
- Drawing (79 KB)
- IGES (71 KB)
- SolidWorks (124 KB)
- STEP (24 KB)
- MC114N-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end.
- Drawing (82 KB)
- MC114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MC116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (73 KB)
- IGES (79 KB)
- SolidWorks (164 KB)
- STEP (39 KB)
- MC120N-14 - Size 16 contact for use with 20 AWG wire, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end.
- Drawing (72 KB)
- MC120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (77 KB)
- MC610NS/AA - High conductivity material, size 12 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (83 KB)
- MC612N/AA - Size 12 contact for use with 12 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (37 KB)
- SolidWorks (106 KB)
- STEP (14 KB)
Removeable contacts, male solder
- MS112N/AA-14 - Size 16 contact for use with 12 AWG, with 0.000030 inch [0.75µ] gold over nickel on mating end and termination end, RoHS compliant
- MS112NS - High conductivity size 16 for use with 12 AWG.
- Drawing (82 KB)
- MS114N/AA - Size 16 for use with 14 AWG, RoHS compliant.
- MS114N/AA-14 - Size 16 for use with 14 AWG, 0.76 microns [0.000030 inch] gold over nickel on
mating end and termination end, RoHS compliant.
- SolidWorks (175 KB)
- MS116N-14 - Size 16 contact for use with 16 AWG wire, 0.76 microns [0.000030 inch] gold over nickel on mating end and termination end, RoHS compliant.
- IGES (93 KB)
- MS116N/AA - Size 16 contact for use with 16 AWG wire, RoHS compliant.
- MS120N/AA - Size 16 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (76 KB)
- MS612N/AA - Size 12 contact for use with 12 AWG wire, RoHS compliant.
- IGES (35 KB)
- SolidWorks (130 KB)
- STEP (22 KB)
