2 power contacts and 8 signal/power contacts
Cable/panel mount connectors
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removable contacts, male crimp
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
- PLB10W2F9300A1 - Straight compliant press-fit termination PCB mount female connector
- IGES (310 KB)
- SolidWorks (1.8 MB)
- STEP (188 KB)
- PLB10W2M9300A1 - Straight compliant press-fit termination PCB mount male connector
- IGES (264 KB)
- SolidWorks (1.4 MB)
- STEP (163 KB)
Cable/panel mount connectors
- PLB10W2F0000 - Cable connector for use with female removable contacts
- Drawing (73 KB)
- IGES (72 KB)
- SolidWorks (238 KB)
- STEP (32 KB)
- PLB10W2F1000 - Panel mount connector for use with female removable contacts
- Drawing (91 KB)
- IGES (68 KB)
- SolidWorks (223 KB)
- STEP (44 KB)
- PLB10W2M0000 - Cable connector for use with male removable contacts
- Drawing (74 KB)
- IGES (57 KB)
- SolidWorks (219 KB)
- STEP (24 KB)
- PLB10W2M1000 - Panel mount connector for use with male removable contacts
- Drawing (91 KB)
- IGES (66 KB)
- SolidWorks (293 KB)
- STEP (28 KB)
PCB mount, contacts: standard material, right angle solder
- PLB10W2F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (153 KB)
- IGES (339 KB)
- SolidWorks (1.3 MB)
- STEP (217 KB)
- PLB10W2M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (153 KB)
- IGES (295 KB)
- SolidWorks (1.4 MB)
- STEP (181 KB)
PCB mount, contacts: standard material, straight press-fit
- PLB10W2F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (149 KB)
- IGES (337 KB)
- SolidWorks (1.8 MB)
- STEP (200 KB)
- PLB10W2M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (148 KB)
- IGES (288 KB)
- SolidWorks (1.4 MB)
- STEP (173 KB)
PCB mount, contacts: standard material, straight solder
- PLB10W2F3N0A1 - Straight solder PCB mount female connector
- Drawing (132 KB)
- IGES (233 KB)
- SolidWorks (652 KB)
- STEP (152 KB)
- PLB10W2M3N0A1 - Straight solder PCB mount male connector
- Drawing (133 KB)
- IGES (197 KB)
- SolidWorks (465 KB)
- STEP (118 KB)
PCB mount, high conductivity contacts, right angle solder
- PLBH10W2F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (145 KB)
- PLBH10W2M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (145 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLBH10W2F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (145 KB)
- PLBH10W2M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (144 KB)
PCB mount, high conductivity contacts, straight solder
- PLBH10W2F3N0A1 - Straight solder PCB mount female connector
- Drawing (128 KB)
- IGES (213 KB)
- SolidWorks (324 KB)
- STEP (144 KB)
- PLBH10W2M3N0A1 - Straight solder PCB mount male connector
- Drawing (129 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removable contacts, male crimp
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (108 KB)
Removeable contacts, female crimp
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (82 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (87 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- Drawing (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (131 KB)
- FC720N2 - Size 20 contact for use with 20 AWG wire.
- IGES (140 KB)
- SolidWorks (275 KB)
- STEP (52 KB)
- FC720N2/AA - Size 20 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (79 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
Removeable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (80 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (92 KB)
Removeable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (88 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- Drawing (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (86 KB)
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- Drawing (91 KB)
- MC720N3/AA - Size 20 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (86 KB)
- SolidWorks (167 KB)
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- Drawing (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
Removeable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (77 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- Drawing (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (87 KB)
