4 power contacts and 12 signal/power contacts
Cable/panel mount connectors
PCB mount, contacts: standard material, right angle solder
PCB mount, contacts: standard material, straight press-fit
PCB mount, contacts: standard material, straight solder
PCB mount, high conductivity contacts, right angle solder
PCB mount, high conductivity contacts, straight press-fit
PCB mount, high conductivity contacts, straight solder
Press-fit PCB hole sizes
Removable contacts, male crimp
Removeable contacts, female crimp
Removeable contacts, female solder
Removeable contacts, male crimp
Removeable contacts, male solder
Measurements expressed in mm [inches] unless otherwise noted. Current ratings stated per U.L. 1977. Connector fully loaded, all contacts under load. See temperature rise curves in catalog for details.
For complete removable contact selection, see Catalog page in the section nav bar.
Cable/panel mount connectors
- PLC16W4F0000 - Cable connector for use with female removable contacts
- Drawing (74 KB)
- IGES (97 KB)
- SolidWorks (281 KB)
- STEP (38 KB)
- PLC16W4F1000 - Panel mount connector for use with female removable contacts
- Drawing (92 KB)
- IGES (98 KB)
- SolidWorks (2.2 MB)
- STEP (58 KB)
- PLC16W4M0000 - Cable connector for use with male removable contacts
- Drawing (73 KB)
- IGES (88 KB)
- SolidWorks (296 KB)
- STEP (36 KB)
- PLC16W4M1000 - Panel mount connector for use with male removable contacts
- Drawing (108 KB)
- IGES (90 KB)
- SolidWorks (254 KB)
- STEP (35 KB)
PCB mount, contacts: standard material, right angle solder
- PLC16W4F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (166 KB)
- IGES (492 KB)
- SolidWorks (1.3 MB)
- STEP (296 KB)
- PLC16W4M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (163 KB)
- IGES (415 KB)
- SolidWorks (1.8 MB)
- STEP (245 KB)
PCB mount, contacts: standard material, straight press-fit
- PLC16W4F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (156 KB)
- PLC16W4M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (151 KB)
PCB mount, contacts: standard material, straight solder
- PLC16W4F3N0A1 - Straight solder PCB mount female connector
- Drawing (138 KB)
- IGES (365 KB)
- SolidWorks (8.4 MB)
- STEP (227 KB)
- PLC16W4M3N0A1 - Straight solder PCB mount male connector
- Drawing (137 KB)
- IGES (288 KB)
- SolidWorks (5.6 MB)
- STEP (171 KB)
PCB mount, high conductivity contacts, right angle solder
- PLCH16W4F4B3N0A1 - Right angle (90°) PCB mount female connector
- Drawing (158 KB)
- PLCH16W4M4B3N0A1 - Right angle (90°) PCB mount male connector
- Drawing (155 KB)
PCB mount, high conductivity contacts, straight press-fit
- PLCH16W4F93ST30A1 - Straight compliant press-fit termination PCB mount female connector
- Drawing (153 KB)
- PLCH16W4M93ST30A1 - Straight compliant press-fit termination PCB mount male connector
- Drawing (148 KB)
PCB mount, high conductivity contacts, straight solder
- PLCH16W4F3N0A1 - Straight solder PCB mount female connector
- Drawing (135 KB)
- PLCH16W4M3N0A1 - Straight solder PCB mount male connector
- Drawing (133 KB)
Press-fit PCB hole sizes
- SK6370 - Press-fit contact PCB hole size supplement
- Drawing (251 KB)
Removable contacts, male crimp
- MC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (108 KB)
Removeable contacts, female crimp
- FC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (88 KB)
- SolidWorks (592 KB)
- STEP (45 KB)
- FC4010D - Size 8 contact for use with 10 AWG wire.
- IGES (78 KB)
- SolidWorks (133 KB)
- STEP (43 KB)
- FC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (82 KB)
- FC4012D - Size 8 contact for use with 12 AWG wire.
- IGES (80 KB)
- SolidWorks (176 KB)
- STEP (43 KB)
- FC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FC4016D - Size 8 contact for use with 16 AWG wire.
- IGES (71 KB)
- SolidWorks (112 KB)
- STEP (30 KB)
- FC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (87 KB)
- FC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (89 KB)
- FC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, crimp/crimp.
- Drawing (110 KB)
- FC4104D - Size 8 shielded contact for use with RG58 B/U, solder/crimp.
- Drawing (131 KB)
- FC720N2 - Size 20 contact for use with 20 AWG wire.
- IGES (140 KB)
- SolidWorks (275 KB)
- STEP (52 KB)
- FC720N2/AA - Size 20 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (79 KB)
- FCC4101D - Size 8 shielded contact for use with RG178 or RG196 B/U, crimp/crimp.
- IGES (85 KB)
- SolidWorks (132 KB)
- STEP (39 KB)
Removeable contacts, female solder
- FS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (80 KB)
- IGES (62 KB)
- SolidWorks (110 KB)
- STEP (35 KB)
- FS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (83 KB)
- FS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (64 KB)
- SolidWorks (147 KB)
- STEP (36 KB)
- FS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (88 KB)
- IGES (81 KB)
- SolidWorks (174 KB)
- STEP (35 KB)
- FS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (89 KB)
- IGES (81 KB)
- SolidWorks (184 KB)
- STEP (35 KB)
- FS4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- FS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (88 KB)
- FS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (92 KB)
Removeable contacts, male crimp
- MC4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (74 KB)
- SolidWorks (171 KB)
- STEP (45 KB)
- MC4010D/AA - Size 8 contact for use with 10 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (88 KB)
- MC4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (88 KB)
- MC4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, RoHS compliant, crimp/crimp.
- Drawing (90 KB)
- MC4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/crimp.
- Drawing (86 KB)
- MC4103D/AA - Size 8 shielded contact for use with RG180 B/U, RoHS compliant, solder/crimp.
- Drawing (91 KB)
- MC720N3/AA - Size 20 contact for use with 20 AWG wire, RoHS compliant.
- Drawing (83 KB)
- IGES (86 KB)
- SolidWorks (167 KB)
- MCC4102D - Size 8 shielded contact for use with RG179 or RG316 B/U, crimp/crimp.
- Drawing (47 KB)
- IGES (43 KB)
- SolidWorks (109 KB)
- STEP (23 KB)
Removeable contacts, male solder
- MS4008D/AA - Size 8 contact for use with 8 AWG wire, RoHS compliant.
- Drawing (87 KB)
- IGES (31 KB)
- SolidWorks (98 KB)
- STEP (21 KB)
- MS4012D/AA - Size 8 contact for use with 12 AWG wire, RoHS compliant
- Drawing (77 KB)
- MS4016D/AA - Size 8 contact for use with 16 AWG wire, RoHS compliant.
- Drawing (77 KB)
- IGES (34 KB)
- SolidWorks (97 KB)
- STEP (21 KB)
- MS4101D/AA - Size 8 shielded contact for use with RG178 or RG196 B/U, solder/solder, RoHS compliant.
- Drawing (75 KB)
- IGES (69 KB)
- SolidWorks (146 KB)
- STEP (41 KB)
- MS4102D/AA - Size 8 shielded contact for use with RG179 or RG316 B/U, RoHS compliant, solder/solder.
- Drawing (91 KB)
- IGES (69 KB)
- SolidWorks (151 KB)
- STEP (41 KB)
- MS4103D - Size 8 shielded contact for use with RG180 B/U, solder/solder.
- Drawing (70 KB)
- MS4104D/AA - Size 8 shielded contact for use with RG58 B/U, RoHS compliant, solder/solder.
- Drawing (90 KB)
- MS4820D/AA - Size 8 high voltage contact for use with 20 AWG wire, straight termination, RoHS compliant.
- Drawing (87 KB)
